quick help with new amp and subs !

[homerunhtr21]

i just bought a :

Audiobahn DUB8001 amplifier
RMS Power Range : 800 Watts
Number Of Channels: 1
Low Frequency response: 10 Hz
High Frequency Response: 40000 Hz
Built In Crossovers: Yes
DUB - 1 x 800 Watts @ 4 Ohm
4 Ohms Mono: 800W RMS x 1
This amplifier is NOT 2 ohms or 1 ohm stable

and I was wondering if anybody had a diagram or a write up on how to hook it up to :

2 Memphis 15-PR104D 450 Watt DVC Subwoofer
RMS/Peak (W)- 250/450
Sensitivity (dB) - 87
Magnet Size (Oz) - 50
Mounting Depth (in) - 5

[fredmr85]

i just bought a :

Audiobahn DUB8001 amplifier
RMS Power Range : 800 Watts
Number Of Channels: 1
Low Frequency response: 10 Hz
High Frequency Response: 40000 Hz
Built In Crossovers: Yes
DUB - 1 x 800 Watts @ 4 Ohm
4 Ohms Mono: 800W RMS x 1
This amplifier is NOT 2 ohms or 1 ohm stable

and I was wondering if anybody had a diagram or a write up on how to hook it up to :

2 Memphis 15-PR104D 450 Watt DVC Subwoofer
RMS/Peak (W)- 250/450
Sensitivity (dB) - 87
Magnet Size (Oz) - 50
Mounting Depth (in) - 5

Well you'll want a 4 ohm impedance, and you have DVC subs -- based on the model number of the subs, I'm assuming the 10 is for 10" and the 4D is for dual 4-ohm voice-coils -- if that is the case:

Wire the voicecoils in series with one another and then the subs in parallel with each other

or

wire the voicecoils in series with one another and then the subs in series with one another

or

if you aren't sure what that looks like, here's a diagram:

[homerunhtr21]

thanks