This is a discussion on Power seat within the Stereo and Electronics forums, part of the General Help category; I have a 98 z28 that came stock with a power driver seat and regular passenger seat. i recently bought ...
05-06-2007, 07:59 PM #1
- Join Date
- May 2007
- 1998 Camaro z28
I have a 98 z28 that came stock with a power driver seat and regular passenger seat. i recently bought a set of 01 trans am seats that have the lumbar support. once installed they worked fine for a couple of weeks until the other day when they stopped. i believe the fuse is blown b/c the rear defogger dosent work and they run off the same fuse. the fuse itself is extremely hot and i was wondering if i should install a larger fuse because of the added stress???
05-07-2007, 11:44 AM #2
- Join Date
- Jul 2005
- Jacksonville, FL
Should be a circuit breaker and not a fuse, right? They get weak over time and some people replace it with a 30 AMP fuse - but I'd replace the breaker. To make sure it's not a wiring problem you could put a fuse in it temporarily and see what happens. Or just wait until it cools and see if it starts working again. I wouldn't put in anything larger than it calls for.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By adamz28 in forum Parts Wanted / TradeReplies: 1Last Post: 04-20-2007, 01:36 PM
By JoeShmoe in forum General HelpReplies: 20Last Post: 01-21-2007, 07:36 AM
By enjun in forum Parts Wanted / TradeReplies: 6Last Post: 01-15-2007, 05:02 PM
By Danger731 in forum General HelpReplies: 3Last Post: 09-01-2006, 11:10 AM
By whs in forum General HelpReplies: 0Last Post: 10-11-2005, 04:46 PM