--HELP-- wiring system (passing wire from inside into door)

**Eugenio_SS** · 05-05-2006, 03:18 PM

I've seached with no results

in the midst of finalising my stereo install... tests are good, and want to pass the wires from the splitters to the front speakers and tweaters.
That means I have to pass wires through the little wire gourmet that goes to the door.
Access seems like hell.
Anyone done it ?
Any pointers ?
Especially from the inside of the car area, close to the fuse box... how can i pass wires from inside the car to the door ?

Thanks for help

**White Rascal** · 05-05-2006, 04:43 PM

I use a wire clothes hanger with the wires taped to the end. I start by feeding it in thru the door into the rubber boot. I use my free hand to help guide the hanger thru the boot. Once it's thru the boot and into the kick panel area the rest is easy.

**sgt0704** · 05-05-2006, 05:40 PM

Originally Posted by White Rascal

I use a wire clothes hanger with the wires taped to the end. I start by feeding it in thru the door into the rubber boot. I use my free hand to help guide the hanger thru the boot. Once it's thru the boot and into the kick panel area the rest is easy.

**Eugenio_SS** · 05-05-2006, 06:44 PM

i'll try it from the door towards the inside, hoping i can feel it on the inside and play with it.
Thanks

**Walking-Dead** · 05-10-2006, 02:23 PM

That's the way I did it but I happened to have an electricians fish tape. Same thing as a coat hanger. Its is a PIA though!! Especially on the drivers side cause the harness is a little larger going through there as I recall. Use quality cable so you don't have to do it again ever.

**mikeaford** · 05-14-2006, 06:54 PM

agree I have a home flat wire puller I spooled out and fed through there wrapped the wire in tape and pulled it back through agree - this is a PITA or lower back...