Results 1 to 6 of 6

deck help

This is a discussion on deck help within the Stereo and Electronics forums, part of the General Help category; Ok put in a new JVC deck, went to walmart got the power plug so I could just plug and ...

  1. #1
    Drive it like its stolen gillahoon's Avatar
    Join Date
    May 2006
    Location
    Carbondale, Pa
    Age
    42
    Posts
    109

    White
    1998 Trans Am

    deck help

    Ok put in a new JVC deck, went to walmart got the power plug so I could just plug and go. Ran all new speaker wire for the four 6.5 so I didnt have to use the monsoon speaker wire. Hook up the deck and now I keep Blowing the fuse to my Ac/crusie control. So I take out the deck check all the wireing no bare wires put it back in new fuse it blows again. So know I get rid of the walmart harness and hook the deck up just wire to wire, deck sound good all speakers working, new fuse for the ac still blows. Now I dont know what to do am I using the right wires to hook up the deck or not useing enough. I took a test light and ever wire i touch had power, so it seems out of the 6 or so wires who had power, i hooked up the deck use 2 or 3, what eles do i need to do or what no to do. Need help plz.

  2. #2
    Senior Member bigrondownhiller's Avatar
    Join Date
    Feb 2006
    Location
    Orange County, NY
    Age
    42
    Posts
    2,674

    Black
    1996 Camaro Z28 vert

    The only wires that should have power that you need are yellow(constant) and orange(bat). Black is ground. There is a grey and a brown that are for the illumination. Are they touching anything metal? That is the only thing I could think of that would make that fuse blow.

  3. #3
    Drive it like its stolen gillahoon's Avatar
    Join Date
    May 2006
    Location
    Carbondale, Pa
    Age
    42
    Posts
    109

    White
    1998 Trans Am

    help

    i am only useing the 2 wires dont see anyother bear wires still blowing, i unpluged the amp in the back would that have anyting to do with it, i unpluged it when it frirst started to happen, but for the new rewire, would it have any thing to do with it i am really lost here and need help.

  4. #4
    Senior Member bigrondownhiller's Avatar
    Join Date
    Feb 2006
    Location
    Orange County, NY
    Age
    42
    Posts
    2,674

    Black
    1996 Camaro Z28 vert

    The unplugged amp in the back should have nothing to do with it. What 2 wires are you using?

  5. #5
    Drive it like its stolen gillahoon's Avatar
    Join Date
    May 2006
    Location
    Carbondale, Pa
    Age
    42
    Posts
    109

    White
    1998 Trans Am

    help

    yellow and orange and pink for power antenna

  6. #6
    Drive it like its stolen gillahoon's Avatar
    Join Date
    May 2006
    Location
    Carbondale, Pa
    Age
    42
    Posts
    109

    White
    1998 Trans Am

    help

    Ok i dont think its the radio took out the harness and just usein 3 wires from the car to run the radio. So now the ac i put in a new fuse it runs cold for about 5 mins then it blows. can someone plz give me a idea why the ac/curise fuse keep blowing i need help, he there somting in the line between the fuse box and the ac control that might be bad, need any idea why this fuse keeps blowing

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Wiring new deck
    By Mike510 in forum Stereo and Electronics
    Replies: 0
    Last Post: 05-15-2008, 08:07 PM
  2. rear deck lid
    By SandmanWs7 in forum General Help
    Replies: 5
    Last Post: 10-24-2006, 11:25 PM
  3. Need some help with deck install please?
    By blackSS01 in forum Stereo and Electronics
    Replies: 1
    Last Post: 08-13-2006, 07:07 AM
  4. How big is your Deck?
    By KyleLs1 in forum Almost Anything Goes
    Replies: 4
    Last Post: 06-23-2006, 09:48 PM
  5. Problem with CD deck
    By GottaHaveLS1 in forum Stereo and Electronics
    Replies: 2
    Last Post: 06-03-2006, 09:39 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •