Results 1 to 3 of 3

CD Changer Problem

This is a discussion on CD Changer Problem within the Stereo and Electronics forums, part of the General Help category; ...

  1. #1
    Junior Member nosman's Avatar
    Join Date
    Mar 2007

    Camaro SS

    Smile CD Changer Problem

    Hi, would anyone know the correct way to install a 12 disc CD changer for my 2001 SS convertible. There are 3 brackets for the correct GM installation. One goes underneath of the changer and attaches to the chassis with screws. This bracket attaches to the rear holes of the side brackets with a stud screw on the right side facing up with a bolt and the left side (Rear of car) with a guide hole for the rubber gramite from the side bracket. My question is has anyone drilled into the chassis for the other two side bracket holes with any problems? I donít want to drill anything before I find out if there is any wiring or problems related to doing this.

    Thank you for any help

  2. #2
    Junior Member
    Join Date
    Feb 2007
    East coast
    Pics Of Brackets

  3. #3
    Junior Member
    Join Date
    Mar 2007
    Is this the same as how they came from the factory? If so, my CD changer has two brackets on the side of it. There's one bracket that was welded to the floor. You slide one part of the floor bracket into the holes of the CD changer bracket, and there's a screw that comes up from the floor bracket and you use a nut to secure that side of the CD changer.

    The factory one is welded. IDK if it's safe to screw into it.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. CD Changer Serial Data
    By slade8200 in forum Stereo and Electronics
    Replies: 3
    Last Post: 08-26-2007, 03:22 PM
  2. is it a clutch problem, or a tranny problem?
    By sgt0704 in forum Manual Transmission
    Replies: 3
    Last Post: 01-07-2007, 04:03 PM
  3. Please Help With My Problem
    By my00blackta in forum Computer & Tuning
    Replies: 15
    Last Post: 11-29-2006, 02:38 PM
  4. Having somewhat of a problem...
    By Lone Lobo in forum General Help
    Replies: 10
    Last Post: 11-23-2006, 03:36 PM
  5. Very Strange Gauges Problem
    By Friptzap in forum General Help
    Replies: 4
    Last Post: 09-18-2006, 06:19 AM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts