This is a discussion on pushrod length within the GTO forums, part of the Vehicle Specific category; hi everyone just after a quick answer.I have a texas-speed 228R camshaft and was wondering would my 7.425'' pushrods be ...
11-12-2009, 04:25 PM #1
- Join Date
- Oct 2009
- perth australia
- commodore 2000 maf tuned
hi everyone just after a quick answer.I have a texas-speed 228R camshaft and was wondering would my 7.425'' pushrods be the right length or should i have got the 7.450'' length pushrods.Is it true that texas-speed cams are ground with a reduced base circle ie 50thou(mm) if that is the case should i have got the 7.450'' std 7.40''+50thou=7.450" any help would be welcomed.cheers
11-12-2009, 04:33 PM #2
I just got stock length rods ( 7.400) for my f-body running that cam. You really should measure for them in all honesty.
11-12-2009, 09:28 PM #3
you can get an adjustable pushrod to check to be sure what length you need. you should beable to pick one up for around $20 at a local speed shop or summit racing
11-12-2009, 09:40 PM #4
Measure to be sure. 20 bucks.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Ed Blown Vert in forum Camaro / SSReplies: 0Last Post: 09-28-2009, 10:20 PM
By JattGunMan in forum Internal EngineReplies: 4Last Post: 04-10-2008, 09:04 PM
By SexyTransAm in forum Classic MuscleReplies: 2Last Post: 01-15-2008, 03:50 PM
By Naf in forum Internal EngineReplies: 2Last Post: 07-28-2007, 05:06 AM
By laststaric in forum Internal EngineReplies: 1Last Post: 07-19-2006, 05:26 PM