Results 1 to 4 of 4

Need Driveshaft supplier Please!!!!

This is a discussion on Need Driveshaft supplier Please!!!! within the GTO forums, part of the Vehicle Specific category; HEY All, I got a serious driveshaft (DS) issue... Allow me to get you all up to speed, i changed ...

  1. #1
    Need Sand ??? Naf's Avatar
    Join Date
    Aug 2006
    Location
    Sandbox, Kuwait
    Age
    38
    Posts
    247

    Black
    06 Chevy Caprice HT (RIP)

    Exclamation Need Driveshaft supplier Please!!!!

    HEY All,

    I got a serious driveshaft (DS) issue...

    Allow me to get you all up to speed, i changed my transmission from an auto to manual. I used kind of wrong parts, but modified the chassis and it all works...

    Now to my issue, i found my stock DS was too short, so i made an adaptor to lengthen it, but i also needed another universal so it turns smoothly. So i scarpped the original idea found a slip joint and universal joint welded them to a pipe...

    At first i had a visious vibratation, so i took the DS off and found the universals had some play...I removed the play, assured centered position and found a 2mm curve to the pipe....That would be 0.07874" curve...

    The vibration is present from 40mph up...

    I am lookin for DS parts so i may measure in a new carbonfiber DS...can anyone help?

    I need a slip yoke universal, and universal joint...Both about 3" diameter, and able to rev up to 12500rpm...

    Please, being overseas does not help, and time is passin me by...

    Thank you for your time
    Last edited by Naf; 04-04-2007 at 05:58 AM.

  2. #2
    Nitrous Tuner LS2Tuner's Avatar
    Join Date
    Aug 2006
    Location
    WestCoast AZ-CALI
    Posts
    4,763

    Silver
    05 Goat SMASHED

    Yes you need to call Tony over at Inland he can take care of you.

    http://www.iedls.com/
    Don't be afraid of the bottle!!! Be afraid of your tune!!!

  3. #3
    Need Sand ??? Naf's Avatar
    Join Date
    Aug 2006
    Location
    Sandbox, Kuwait
    Age
    38
    Posts
    247

    Black
    06 Chevy Caprice HT (RIP)

    Wink

    Thanks for the tip

    Lets hope he is up to the challenge and can help me out...

  4. #4
    Senior Member bigrondownhiller's Avatar
    Join Date
    Feb 2006
    Location
    Orange County, NY
    Age
    42
    Posts
    2,674

    Black
    1996 Camaro Z28 vert

    you could also try dennysdriveshaft.com

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. GM suing supplier to keep Camaro production going
    By doberman 152 in forum Almost Anything Goes
    Replies: 8
    Last Post: 12-29-2008, 01:41 AM
  2. LS1 Driveshaft
    By Badman in forum Parts Wanted / Trade
    Replies: 6
    Last Post: 11-30-2008, 12:32 PM
  3. I need a driveshaft!
    By 02Ls1Formula in forum Southern Members
    Replies: 0
    Last Post: 05-13-2008, 02:46 PM
  4. Driveshaft???
    By paugust73 in forum Drivetrain
    Replies: 3
    Last Post: 07-02-2007, 02:11 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •