Page 1 of 2 12 LastLast
Results 1 to 20 of 22

Need 02 sensors

This is a discussion on Need 02 sensors within the GTO forums, part of the Vehicle Specific category; ok...I was tunning my car some more over the week with my tunner..He said that one of the 02 sensors ...

  1. #1
    Member pmolina0436's Avatar
    Join Date
    Jul 2008
    Location
    Texas
    Posts
    528

    Black
    2004 GTO

    Need 02 sensors

    ok...I was tunning my car some more over the week with my tunner..He said that one of the 02 sensors might be defective cause its slow in reading...So im going to get some new 02 sensors, im looking for both but i have LT headers..anyone know what kind and where i can find some sensors for my car..thanks..

    Also is a certain brand recommended? and is it a 2 wire or 4 wire design ?

  2. #2
    Junior Member boostcreep's Avatar
    Join Date
    Oct 2008
    Location
    here
    Posts
    6
    got mine from autozone about a month ago when I did my header install, cost about $40 each, Mine are bosch sensors. They are 4 wire (IIRC)

  3. #3
    Member pmolina0436's Avatar
    Join Date
    Jul 2008
    Location
    Texas
    Posts
    528

    Black
    2004 GTO

    Quote Originally Posted by boostcreep View Post
    got mine from autozone about a month ago when I did my header install, cost about $40 each, Mine are bosch sensors. They are 4 wire (IIRC)
    were they long enough for long tube headers? and did you have to cut wire?

  4. #4
    Junior Member boostcreep's Avatar
    Join Date
    Oct 2008
    Location
    here
    Posts
    6
    I got extensions with my headers, so yes
    Seriously though they won't reach without extensions (well depends on header I guess) but more than likely yours either have extensions already or they were spliced in. Which if that is the case you will most likely have to do same with new ones.

  5. #5
    cutting and welding mark21742's Avatar
    Join Date
    Mar 2008
    Location
    mercersburg pa
    Posts
    6,443

    hugger orange
    2004

    I spliced extra wire in my factory o2s, but I HIGHLY recomend buying the extensions.....they are cheap and plug right in.
    if you look in(i think ) the computer section Frost and Orion gave out the bosch part number.....there again I think it is for a rear vette o2

  6. #6
    Impounded
    Join Date
    Oct 2007
    Location
    Beaver Dam KY
    Posts
    7,746

    79 T/A -91 Firebird
    1998 Trans Am -Oynx Black

    c5 corvette bosch 02 sensor..

    No extensions factory fit.

  7. #7
    That guy thearborbarber's Avatar
    Join Date
    Nov 2007
    Location
    SoDak
    Posts
    892

    White over Red
    1991 Suburban

    Bosch 13111 O2 sensor and no extension is needed.

  8. #8
    Impounded
    Join Date
    Oct 2007
    Location
    Beaver Dam KY
    Posts
    7,746

    79 T/A -91 Firebird
    1998 Trans Am -Oynx Black

    Quote Originally Posted by JoshieDoom View Post
    c5 corvette bosch 02 sensor..

    No extensions factory fit.
    Quote Originally Posted by thearborbarber View Post
    Bosch 13111 O2 sensor and no extension is needed.
    haha thanks I was lazy bro

  9. #9
    cutting and welding mark21742's Avatar
    Join Date
    Mar 2008
    Location
    mercersburg pa
    Posts
    6,443

    hugger orange
    2004

    Quote Originally Posted by JoshieDoom View Post
    haha thanks I was lazy bro
    lol me too

  10. #10
    Senior Member qwkgto's Avatar
    Join Date
    Mar 2008
    Location
    OHIO"S only 9 second GTO
    Posts
    1,464

    Phantom Black Metalic
    2005 GTO

    Quote Originally Posted by pmolina0436 View Post
    ok...I was tunning my car some more over the week with my tunner..He said that one of the 02 sensors might be defective cause its slow in reading...So im going to get some new 02 sensors, im looking for both but i have LT headers..anyone know what kind and where i can find some sensors for my car..thanks..

    Also is a certain brand recommended? and is it a 2 wire or 4 wire design ?
    yeap autozone $44 do you have a ls1 or ls2?mine is a ls2 i can get part number its a bosch sensor.same as factory unit.
    mods: custom built twins, built 408 w/l92 stock GM heads,GM matching intake,drag bags,frame ties,aluminum drive shaft, performabuilt 4l80e,Yank converter,ohios fastest and quickest 04-06 GTO 9.52 at 144mph. 1.50 60ft on stock rear end and shafts/suspension,on drag radials.

  11. #11
    Member pmolina0436's Avatar
    Join Date
    Jul 2008
    Location
    Texas
    Posts
    528

    Black
    2004 GTO

    Quote Originally Posted by thearborbarber View Post
    Bosch 13111 O2 sensor and no extension is needed.
    so these dont require any wire cutting right?? are these it
    http://cgi.ebay.com/ebaymotors/ws/eB...3AIT&viewitem=

    ???

    I know when they installed my headers they did cut wire to fit the headers...So if i get these i dont need anything else right?? just take my old and in with the new...plug and play?? they come with that connecter at the end of the wire right?
    Last edited by pmolina0436; 05-16-2009 at 08:39 PM.

  12. #12
    That guy thearborbarber's Avatar
    Join Date
    Nov 2007
    Location
    SoDak
    Posts
    892

    White over Red
    1991 Suburban

    Quote Originally Posted by pmolina0436 View Post
    so these dont require any wire cutting right?? are these it
    http://cgi.ebay.com/ebaymotors/ws/eB...3AIT&viewitem=

    ???

    I know when they installed my headers they did cut wire to fit the headers...So if i get these i dont need anything else right?? just take my old and in with the new...plug and play??
    You should be all to go with those. The cable doesn't look long enough though. This where I bought mine

    http://store.summitracing.com/partde...5&autoview=sku

    or

    http://www.ws6project.com/user_stor/...7e69d6a04c71a8
    Last edited by thearborbarber; 05-16-2009 at 08:38 PM.

  13. #13
    Member pmolina0436's Avatar
    Join Date
    Jul 2008
    Location
    Texas
    Posts
    528

    Black
    2004 GTO

    Quote Originally Posted by qwkgto View Post
    yeap autozone $44 do you have a ls1 or ls2?mine is a ls2 i can get part number its a bosch sensor.same as factory unit.
    its an ls1...I went to an advance autoparts today but all they have is the universal ones that require wire cutting..Im going to check autozone 2marrow..

  14. #14
    Member pmolina0436's Avatar
    Join Date
    Jul 2008
    Location
    Texas
    Posts
    528

    Black
    2004 GTO

    Quote Originally Posted by thearborbarber View Post
    You should be all to go with those. The cable doesn't look long enough though. This where I bought mine

    http://store.summitracing.com/partde...5&autoview=sku

    or

    http://www.ws6project.com/user_stor/...7e69d6a04c71a8
    oh yea...the ones from summit look good.. That includes everything right..Like the connector at the end of the wire?
    casue it says

    Oxygen Sensor Bung Included: No <<<<<< dont know what that , means though?

  15. #15
    That guy thearborbarber's Avatar
    Join Date
    Nov 2007
    Location
    SoDak
    Posts
    892

    White over Red
    1991 Suburban

    Quote Originally Posted by pmolina0436 View Post
    oh yea...the ones from summit look good.. That includes everything right..Like the connector at the end of the wire?
    casue it says

    Oxygen Sensor Bung Included: No <<<<<< dont know what that , means though?
    Summit is where I got mine and they were plug and play. No splicing or cutting. The bung is the fitting that the sensor threads into.

  16. #16
    Senior Member qwkgto's Avatar
    Join Date
    Mar 2008
    Location
    OHIO"S only 9 second GTO
    Posts
    1,464

    Phantom Black Metalic
    2005 GTO

    Quote Originally Posted by pmolina0436 View Post
    its an ls1...I went to an advance autoparts today but all they have is the universal ones that require wire cutting..Im going to check autozone 2marrow..
    the ls1s look alil diffrent autozone has toi order mine they are 4 wire on the ls2,in the fronts and rears,still cheaper then summit and no shipping charges,the ones I have are the exact fit as the factory ls2 02 units.ill have to remember to look at part number on box in the garage and post it up here.

  17. #17
    Member pmolina0436's Avatar
    Join Date
    Jul 2008
    Location
    Texas
    Posts
    528

    Black
    2004 GTO

    Quote Originally Posted by qwkgto View Post
    the ls1s look alil diffrent autozone has toi order mine they are 4 wire on the ls2,in the fronts and rears,still cheaper then summit and no shipping charges,the ones I have are the exact fit as the factory ls2 02 units.ill have to remember to look at part number on box in the garage and post it up here.
    ok...I noticed that you said "front and rears"... Do i need to get 4 02 sensors..I thought it was only 2..??

  18. #18
    cutting and welding mark21742's Avatar
    Join Date
    Mar 2008
    Location
    mercersburg pa
    Posts
    6,443

    hugger orange
    2004

    Quote Originally Posted by pmolina0436 View Post
    ok...I noticed that you said "front and rears"... Do i need to get 4 02 sensors..I thought it was only 2..??
    get the rear o2s for a vette and use them in place of your front o2s, then just leave your rear o2s unhooked (delete them) stock you have 4, you will only be using your front 2 now

  19. #19
    Smiles for 9.5 Years cammed goat's Avatar
    Join Date
    Jan 2009
    Location
    Paterson/Ridgewood, NJ
    Posts
    11,474

    Phantom Black Metallic
    2004 GTO M6



    extreme dimensions, driveshaft shop, harrop, hid(35watt/6k) lows, hurst, k&n, led fogs, maverick man, mishimoto, nitto, revshift, slp, stern st-1, smoked sidemarkers, whiteline poly radius rod bushings

  20. #20
    Member pmolina0436's Avatar
    Join Date
    Jul 2008
    Location
    Texas
    Posts
    528

    Black
    2004 GTO

    Quote Originally Posted by mark21742 View Post
    get the rear o2s for a vette and use them in place of your front o2s, then just leave your rear o2s unhooked (delete them) stock you have 4, you will only be using your front 2 now
    lol...oh yea i forgot that i deleted the other 2...Yea well im just going to get the front 02 sensors...thanks..

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. O2 sensors
    By c5z28 in forum Computer & Tuning
    Replies: 27
    Last Post: 10-06-2010, 02:35 PM
  2. O2 sensors
    By Soltakr in forum External Engine
    Replies: 19
    Last Post: 05-20-2008, 10:09 PM
  3. 02 sensors
    By 02sscamaro in forum General Help
    Replies: 25
    Last Post: 04-16-2008, 05:02 AM
  4. o2 sensors
    By ls1_02 in forum General Help
    Replies: 9
    Last Post: 01-10-2008, 09:51 AM
  5. Should I buy new sensors?
    By EastTNZ28 in forum General Help
    Replies: 0
    Last Post: 06-15-2007, 10:14 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •