Results 1 to 11 of 11

mustang 4 dinner and launch

This is a discussion on mustang 4 dinner and launch within the GTO forums, part of the Vehicle Specific category; monaro ls1 03 enjoy it my video in drag race ((my first time on track)) with bad drive http://video.google.com/videoplay?do...=samir+vs+said i ...

  1. #1
    Junior Member
    Join Date
    Apr 2007
    Location
    k.s.a
    Posts
    21

    black
    2003 monaro

    mustang 4 dinner and launch

    monaro ls1 03 enjoy it

    my video in drag race ((my first time on track))

    with bad drive

    http://video.google.com/videoplay?do...=samir+vs+said

    i need some comment about it

    my time:11.745
    my 60 foot:1.703

    more vid well come sooon
    Last edited by hot monaro; 04-16-2007 at 10:53 PM.
    dart heades .228/232. 600/600 crane.comp lifters .42 injectors .and push road.pulished tb.asp under drive pulley.k&n ram air.peacmaker L/T.magnaflow catback.tci converter 3500 rpm.trans go.373 ratio with LSD. my best time in bad drive ((first time in track)) is 11.7@189.9km/h rwhp 414 rwtq 415

  2. #2
    Veteran Hi-Po's Avatar
    Join Date
    Nov 2005
    Location
    Florida
    Posts
    10,461

    Black
    1999 TA WS.6

    Vid link is nad..... but very impressive times.

  3. #3
    Junior Member
    Join Date
    Apr 2007
    Location
    KSA
    Posts
    3

    SILVER GTO
    2004

    nice time bro.

  4. #4
    your parts guy!!! 1fastcamarosss11's Avatar
    Join Date
    Aug 2005
    Location
    cleveland ohio
    Posts
    11,376

    trans am 00 ws6
    1998 camaro ss vert

    it looked like he got you on the top end.

  5. #5
    Junior Member
    Join Date
    Apr 2007
    Location
    KSA
    Posts
    3

    SILVER GTO
    2004


  6. #6
    Nitrous Tuner LS2Tuner's Avatar
    Join Date
    Aug 2006
    Location
    WestCoast AZ-CALI
    Posts
    4,763

    Silver
    05 Goat SMASHED

    I think my 80 year old grandma could of shifted that Fox body coupe better than that!!!

    Are you stabbing it from a idle or loading it on the conv.?
    Also what kind of tire pressure are you running?
    And last but not least do you drive around the waterboix or roll staright through it?
    Don't be afraid of the bottle!!! Be afraid of your tune!!!

  7. #7
    Junior Member
    Join Date
    Apr 2007
    Location
    k.s.a
    Posts
    21

    black
    2003 monaro

    1)loading it
    2)15.5
    3) roll staright

    my tuner not rmoving my tq mangment + i have bad tuning here in ksa no body tune goood

  8. #8
    Nitrous Tuner LS2Tuner's Avatar
    Join Date
    Aug 2006
    Location
    WestCoast AZ-CALI
    Posts
    4,763

    Silver
    05 Goat SMASHED

    Who's dragradial are you using?
    If it's a Mickey Thompson 275/40/17 on your stock wheels that is too low.If you go to nice CLEAN concrete parking lot and do a holeshot after just a quick cleaning of the tires you'll see the marks left will be very dark on the edges and light in the middle due to TOO low os psi the tire cups.
    Also next time you go watch some others and you should see some people driving around the waterbox and then backing up to do there burnout. That is what you should get in the habit of doing!
    When you don't you are putting a great amount of water in your 7-9" front tires tread....... So as you are sitting waiting for the tree there is water running down the tread and whaen you take off you roll right into the same moisture which causes LESS traction.
    You'll probably get better 60' (once you get the psi right) if you only load the conv. to 1100-1200 cause it will flash better like that versus holding it a 2000 or higher.
    Try it I think those things should help you greatly.

  9. #9
    Junior Member
    Join Date
    Apr 2007
    Location
    k.s.a
    Posts
    21

    black
    2003 monaro

    thanks man i think thats well help me im raning m/t 16'' on rear comaro wheels
    i like 16'' slicks its much better to me
    how much hp and tq can stock axles and Driveshafts handels?
    im runing with MT ET Street Radial what well be hapend if i put drag Radial.
    can my axels and driveshaft handel it or will be blow?

    thanks for help
    Last edited by hot monaro; 04-21-2007 at 11:03 PM.

  10. #10
    Nitrous Tuner LS2Tuner's Avatar
    Join Date
    Aug 2006
    Location
    WestCoast AZ-CALI
    Posts
    4,763

    Silver
    05 Goat SMASHED

    Until you get into the low 11's high 10's range I wouldn't worry about it.
    JUST MAKE SURE TO LIFT IF IT STARTS WHEEL HOPPING!!!

  11. #11
    Junior Member
    Join Date
    Apr 2007
    Location
    k.s.a
    Posts
    21

    black
    2003 monaro

    Quote Originally Posted by LS2Tuner View Post
    Until you get into the low 11's high 10's range I wouldn't worry about it.
    JUST MAKE SURE TO LIFT IF IT STARTS WHEEL HOPPING!!!

    loooooooooooooool thanks guy's

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2012 Mustang Boss 302 Launch - HOT ROD Is There
    By Ed Blown Vert in forum Almost Anything Goes
    Replies: 0
    Last Post: 08-14-2010, 07:30 AM
  2. So what's for dinner?
    By SHines-IT in forum Almost Anything Goes
    Replies: 54
    Last Post: 03-14-2010, 03:39 PM
  3. Mustang its whats for dinner.
    By Madcity T/A in forum Firebird / WS6
    Replies: 71
    Last Post: 07-19-2007, 08:48 PM
  4. favorite dinner
    By superchargedblackgto in forum Almost Anything Goes
    Replies: 15
    Last Post: 06-13-2007, 03:59 PM
  5. Replies: 22
    Last Post: 11-26-2006, 09:54 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •