Results 1 to 15 of 15
Thread: maf sensor
-
12-25-2008, 03:26 PM #1
maf sensor
can anyone tell me if an aftermarket maf sensor is worth getting.mine is a screenless pollished stocker.just wondering the dif. thanks
-
12-25-2008, 04:29 PM #2
-
12-25-2008, 04:51 PM #3
thanks mark kinda figured that just not sure.
Last edited by racer426; 12-25-2008 at 04:55 PM.
-
12-25-2008, 05:05 PM #4
- Join Date
- Oct 2007
- Location
- Beaver Dam KY
- Posts
- 7,745
79 T/A -91 Firebird- 1998 Trans Am -Oynx Black
An aftermarket maf is a good thing when you have a great tuner, a lot of cash, a lot of mods and a lot of time to get it right.
Unless you have all those stick with the stocker. Minimal gains for a lot of cash.
-
12-25-2008, 05:42 PM #5
i need a good tuner.don't know of any local here in nashville.i have the coretex programmer from s-chips and it made no hp change on the dyno .just hella shift points.
-
12-25-2008, 06:05 PM #6
- Join Date
- Oct 2007
- Location
- Beaver Dam KY
- Posts
- 7,745
79 T/A -91 Firebird- 1998 Trans Am -Oynx Black
Come to the Horsepower House In Bowling Green?
-
12-25-2008, 06:30 PM #7
-
12-25-2008, 07:27 PM #8
- Join Date
- Aug 2005
- Location
- Texas Department of Corrections
- Posts
- 18,128
- Retired Outlaw Sum Bitch
Next step for you will be a speed density tune not an aftermarket MAF.
-
12-25-2008, 07:43 PM #9
-
12-26-2008, 02:14 AM #10
- Join Date
- Aug 2005
- Location
- Texas Department of Corrections
- Posts
- 18,128
- Retired Outlaw Sum Bitch
You betcha
-
12-26-2008, 04:43 AM #11
I've popped the screen out of the OEM MAF.
The PCM is programmed for the OEM MAF.
A different MAF will require HP Tuners or LS1 Edit, in other words a brand of software which enables you to smooth out each of 26 cells controlling the engine under various loads.
Believe it or not popping the screen does a improves the air...
But, only pop the screen out if you have CAI tubing is smooth and not corigated. The idle sensor on the MAF looks for smooth air and your goat won't hold an idle...
I tried an off brand MAF in another vehicle, drove it for 30 minutes in the city, on the e-way and the PCM could not adjust. I stalled out 6 times and every light I pulled up to everybody else thought I wanted to race...
Also, could somebody explain a SD Tune - don't quite under stand the concept.
-
12-26-2008, 05:24 AM #12
- Join Date
- Aug 2005
- Location
- Texas Department of Corrections
- Posts
- 18,128
- Retired Outlaw Sum Bitch
SD allows you to map the A/F...timing etc. versus a computer....you can get as aggressive as you wish and are not a slave to the MAF signals....
-
12-26-2008, 05:33 AM #13
More or Less a MAF Delete???
-
12-26-2008, 05:39 AM #14
-
12-27-2008, 02:40 PM #15
- Join Date
- Mar 2008
- Location
- OHIO"S only 9 second GTO
- Posts
- 1,464
Phantom Black Metalic- 2005 GTO
mods: custom built twins, built 408 w/l92 stock GM heads,GM matching intake,drag bags,frame ties,aluminum drive shaft, performabuilt 4l80e,Yank converter,ohios fastest and quickest 04-06 GTO 9.52 at 144mph. 1.50 60ft on stock rear end and shafts/suspension,on drag radials.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Help: 02 sensor bank 1 sensor 1-Is this drivers side or Passenger
By cballweg in forum General HelpReplies: 4Last Post: 01-15-2012, 10:44 AM -
Question: Reading trans temp stock sensor vs aftermarket sensor in pan
By senicalj4579 in forum Computer & TuningReplies: 1Last Post: 03-29-2011, 07:41 AM -
Knock Sensor/Oil Pressure Sensor Issue
By Slow '99 in forum External EngineReplies: 1Last Post: 04-04-2007, 08:28 AM
Bookmarks