Hid conversion fog lights 2004gto

**TIMBO0566** · 07-20-2012, 05:11 AM

I just bought some hipro power fog light the complete kit. It said it was a plug and play kit but after i got it the instructions said if using a single fuse for both lights, the fuse must be at least 15 to 20 amps, but not over 45 amps. So i check my fuse block and the fuse is a 60 amp. But there are two fuses for the headlamps both are 20 amps. I not sure which one it is talking about. The other thing is there are two fog lamp cancel relays as well. Has anyone installed these type of lights? I'm confused any help would be great.

Click image for larger version.

Name: 2-13-2004 011.JPG
Views: 1
Size: 322.6 KB
ID: 24406

**TIMBO0566** · 07-21-2012, 01:26 AM

The guy I bought them from said to install a relay harness and it has it own fuse, maybe this will help someone else out there.

**Texas Jack** · 07-21-2012, 07:06 AM

Thanks man, electrical is my weak point!!!!

**cammed goat** · 07-21-2012, 09:29 PM

Make sure you remove your DRL relay, if you haven't already.

**TIMBO0566** · 07-21-2012, 11:41 PM

Do i need to remove the drl relay for the fog lamps, i'm just installing the fog lamps not the head lights, is this still neccessary?

**cammed goat** · 07-22-2012, 09:03 AM

My bad. I thought you wanted to install them in the lows as well as the fogs as some of the GTOs I've seen in my area have the HIDs in the lows and fogs. Since you're just doing the fogs, you don't need to pull the DRL relay.