ABS light and display

[mark21742]

On my 04 GTO I deleted the ABS and went manual brakes. It works great, but does anyone know how to trick/ turn off the ABS light and ABS inop indicator in the center display?

[35th-ANV-SS]

Subscribed. I thought the only way was to physically remove the bulb. On pre 98 Camaro's you can ground certain pins on the PCM to shut off the ABS light, but I don't think that applies here with your newer goat.

[mark21742]

I'm sure its a quick easy fix by like you said, just grounding a wire or a resistor, just not sure which wire/wires lol

I'm sure someone has done this before

[The Silver Goat]

How'd you delete the ABS??? I can't stand ABS with with an M6...

[mark21742]

How'd you delete the ABS??? I can't stand ABS with with an M6...

I went with a Wilwood mastercylinder, made a bracket that bolts in where the booster went to bolt the mastercylinder, then ran all new lines to the front and ran a line to an adjustable porportioning valve to the rear

[cammed goat]

Now I am wondering if your lights can be tuned out with HPTuners or other software?

[mark21742]

Now I am wondering if your lights can be tuned out with HPTuners or other software?

My1stgto said they used ls1 edit to take care of his...but I've looked all through hptuners and it doesn't have bcm controls in it

[cammed goat]

Then try the LS1Edit and keep us posted.

[mark21742]

Then try the LS1Edit and keep us posted.

Lol I'm not made of momey and can go out and buy all the tuning software....lol

[67CamaroRSSS]

Now I am wondering if your lights can be tuned out with HPTuners or other software?

^This. I'm thinking HPTuners (or the like) may be able to deal with this, i.e., you gotta turn it off.