Page 1 of 2 12 LastLast
Results 1 to 20 of 23

What mods is it going to take...

This is a discussion on What mods is it going to take... within the Kill Stories forums, part of the Racing Forums category; to beat my neighbors stock 03 Cobra? I know, I know, they are called "Terminators" for a reason. I'm going ...

  1. #1
    Member Huskerz1's Avatar
    Join Date
    Sep 2005
    Location
    Texas
    Age
    47
    Posts
    947

    Black
    99 SS Vert M6

    What mods is it going to take...

    to beat my neighbors stock 03 Cobra? I know, I know, they are called "Terminators" for a reason. I'm going to have a Torquer2, full exhaust, LS6 intake, pulley, and tune put on very soon. Expecting around 420 rwhp. We've played around alittle already and it ain't close right now. Going for the surprise attack on him.

  2. #2
    Senior Member Danger731's Avatar
    Join Date
    Aug 2000
    Location
    Indy
    Posts
    6,712
    those bolt ons may net you 360hp tops, you'll need H/C or a big shot of juice

  3. #3
    Member jasonisdn's Avatar
    Join Date
    Aug 2005
    Location
    nc
    Age
    42
    Posts
    294

    red
    96 ss

    Quote Originally Posted by Huskerz1 View Post
    to beat my neighbors stock 03 Cobra? I know, I know, they are called "Terminators" for a reason. I'm going to have a Torquer2, full exhaust, LS6 intake, pulley, and tune put on very soon. Expecting around 420 rwhp. We've played around alittle already and it ain't close right now. Going for the surprise attack on him.
    put a 100 shot on it you beat him. cheaper than H/C and much quicker install. hide the bottle in the spare tire well and go get him. when my car was a h/c car (years ago with old afr's and a small cam , oh LT1 by the way) i could run even on motor with a stock cobra, hit the button and he got about 5 cars put on him from first to 3rd.

  4. #4
    Slow'er'Ass Mr. Luos's Avatar
    Join Date
    Aug 2005
    Location
    Thornton, CO
    Posts
    23,785

    Red Tint Jewelcoat
    2008 Trailblazer SS

    With your planned mods it will be close. Might be able to pull him slightly.

  5. #5
    Senior Member Hurley711's Avatar
    Join Date
    Jul 2005
    Location
    Earth
    Age
    41
    Posts
    3,362

    414 RWHP 395 RWTQ
    00 Black Ram Air Trans Am

    Quote Originally Posted by Huskerz1 View Post
    to beat my neighbors stock 03 Cobra? I know, I know, they are called "Terminators" for a reason. I'm going to have a Torquer2, full exhaust, LS6 intake, pulley, and tune put on very soon. Expecting around 420 rwhp. We've played around alittle already and it ain't close right now. Going for the surprise attack on him.
    Don't expect 420 RWHP with those mods. Better add some heads to that list......
    Last edited by Hurley711; 01-21-2007 at 09:28 AM.

  6. #6
    member since may 2000 nhraformula's Avatar
    Join Date
    Dec 2002
    Location
    n/w chicago
    Age
    47
    Posts
    6,933

    black
    2000 nhra edition formula

    Quote Originally Posted by Danger731 View Post
    those bolt ons may net you 360hp tops, you'll need H/C or a big shot of juice
    what, are you high?
    hes putting in a decent sized cam and just about all the bolt ons.
    hell have around 400 to the wheels
    2000 nhra edition formula
    a few bolt ons, 379 rwhp
    11.96 @113.25

  7. #7
    member since may 2000 nhraformula's Avatar
    Join Date
    Dec 2002
    Location
    n/w chicago
    Age
    47
    Posts
    6,933

    black
    2000 nhra edition formula

    Quote Originally Posted by Mr. Luos View Post
    With your planned mods it will be close. Might be able to pull him slightly.
    i ran an 03-04 cobra off a 35mph roll because he must of knew i would slaughter him off the line. anyways even with my stall and mods, at 35 mph the car has kinda a dead spot there. it wont kick down back into first.

    anyways, he punched it and so did i. he pulled me slightly, we went from being even to him having his doors at my front bumper. by about 60mph we were even and after i started inching on his ass. i dont know what mods he had, but he atleast had a catback.
    cobras have about 600 pounds on our cars. thats like 6 tenths at a track.

  8. #8
    Junior Member Ricer Cooker's Avatar
    Join Date
    Nov 2005
    Location
    Maryland
    Age
    29
    Posts
    60
    Quote Originally Posted by Huskerz1 View Post
    to beat my neighbors stock 03 Cobra? I know, I know, they are called "Terminators" for a reason. I'm going to have a Torquer2, full exhaust, LS6 intake, pulley, and tune put on very soon. Expecting around 420 rwhp. We've played around alittle already and it ain't close right now. Going for the surprise attack on him.
    What is a Torqer2 and does full exhaust mean headers and back?
    If it doesn't have a turbo or a V8, it doesn't belong on the road.

    Hey guys look it came back from the shop! I still need a bigger wing though...

  9. #9
    Member jasonisdn's Avatar
    Join Date
    Aug 2005
    Location
    nc
    Age
    42
    Posts
    294

    red
    96 ss

    Quote Originally Posted by Ricer Cooker View Post
    What is a Torqer2 and does full exhaust mean headers and back?
    heres 1 version
    http://texas-speed.com/shop/item.asp...d=168&catid=44

  10. #10
    Junior Member Ricer Cooker's Avatar
    Join Date
    Nov 2005
    Location
    Maryland
    Age
    29
    Posts
    60
    Quote Originally Posted by Huskerz1 View Post
    to beat my neighbors stock 03 Cobra? I know, I know, they are called "Terminators" for a reason. I'm going to have a Torquer2, full exhaust, LS6 intake, pulley, and tune put on very soon. Expecting around 420 rwhp. We've played around alittle already and it ain't close right now. Going for the surprise attack on him.
    Magic Stick 4 looks better, same price too.

  11. #11
    Member Huskerz1's Avatar
    Join Date
    Sep 2005
    Location
    Texas
    Age
    47
    Posts
    947

    Black
    99 SS Vert M6

    Quote Originally Posted by nhraformula View Post
    what, are you high?
    hes putting in a decent sized cam and just about all the bolt ons.
    hell have around 400 to the wheels

    Thankyou. Finally, somebody not smokin the rock. Don't see too many answers here. MS4 sounds really neat and all but I prefer a little driveability. I guess if I can't get it done with my current mod setup then I'll bring some heads into the picture when I can.

  12. #12
    Junior Member
    Join Date
    Apr 2006
    Location
    MINNESOTA
    Posts
    77

    BLUE
    2000 SS CAMARO

    You will be fine. If you have decent tires, go from a dig.

  13. #13
    Awaiting Activation
    Join Date
    Mar 2006
    Location
    Dixie
    Posts
    102
    Quote Originally Posted by nhraformula View Post
    i ran an 03-04 cobra off a 35mph roll because he must of knew i would slaughter him off the line. anyways even with my stall and mods, at 35 mph the car has kinda a dead spot there. it wont kick down back into first.

    anyways, he punched it and so did i. he pulled me slightly, we went from being even to him having his doors at my front bumper. by about 60mph we were even and after i started inching on his ass. i dont know what mods he had, but he atleast had a catback.
    cobras have about 600 pounds on our cars. thats like 6 tenths at a track.
    How would he know you would slaughter him off the line? What mods do you have because a bonestock 03 will dyno 360 rwhp SAE. A catback may be good for 380 because Ford put baffles in the stock 03 exhaust. The outlets had about 1.5 tubes surrounded by fiber.

    You mean a Camaro weighs 3200 pounds?

  14. #14
    member since may 2000 nhraformula's Avatar
    Join Date
    Dec 2002
    Location
    n/w chicago
    Age
    47
    Posts
    6,933

    black
    2000 nhra edition formula

    Quote Originally Posted by Pumped03 View Post
    How would he know you would slaughter him off the line? What mods do you have because a bonestock 03 will dyno 360 rwhp SAE. A catback may be good for 380 because Ford put baffles in the stock 03 exhaust. The outlets had about 1.5 tubes surrounded by fiber.

    You mean a Camaro weighs 3200 pounds?
    its called a stall converter.
    i havnt had any stick shift car out "60 me.
    my car weighs 3380.

  15. #15
    Senior Member ss~zoso~ss's Avatar
    Join Date
    Dec 2004
    Location
    )
    Posts
    9,128

    SS: NBM, tan top
    1998-SS, 2010 Jetta TDI

    dont race him from a dig, i think those have 4.10's and if he's got tires and skills he'll pull the shit outta u from the hole and it'll be hard to catch him,

    u gotta race him from a roll, i think those cars may be a little lighter too idk

  16. #16
    Junior Member Ricer Cooker's Avatar
    Join Date
    Nov 2005
    Location
    Maryland
    Age
    29
    Posts
    60
    Quote Originally Posted by nhraformula View Post
    i ran an 03-04 cobra off a 35mph roll because he must of knew i would slaughter him off the line. anyways even with my stall and mods, at 35 mph the car has kinda a dead spot there. it wont kick down back into first.

    anyways, he punched it and so did i. he pulled me slightly, we went from being even to him having his doors at my front bumper. by about 60mph we were even and after i started inching on his ass. i dont know what mods he had, but he atleast had a catback.
    cobras have about 600 pounds on our cars. thats like 6 tenths at a track.
    He has a vert Maro, so it weighs 300 #s more. Stock Cobras should run around a 12.8 E.T., use that, at least as the target to beat, when modding.

  17. #17
    member since may 2000 nhraformula's Avatar
    Join Date
    Dec 2002
    Location
    n/w chicago
    Age
    47
    Posts
    6,933

    black
    2000 nhra edition formula

    Quote Originally Posted by Ricer Cooker View Post
    He has a vert Maro, so it weighs 300 #s more. Stock Cobras should run around a 12.8 E.T., use that, at least as the target to beat, when modding.
    true that

  18. #18
    Member Huskerz1's Avatar
    Join Date
    Sep 2005
    Location
    Texas
    Age
    47
    Posts
    947

    Black
    99 SS Vert M6

    Thanks Ricer Cooker. After my mods, I think I'll be in the that neighborhood.

  19. #19
    SS#430 1 of 74 7camaro7's Avatar
    Join Date
    Oct 2005
    Location
    Nashville, TN
    Posts
    1,754

    Pewter
    02SS6spd VERT!

    we've both got 6spd SS verts

  20. #20
    Member Corey1987's Avatar
    Join Date
    Oct 2006
    Location
    Greenville, NC
    Age
    30
    Posts
    231

    Black
    1998 Z/28

    a buddy of mine ran his 98 TA today, A4, Headers, ORY, Borla Carback, lid, ET Streets and ran 12.7s and 12.8s all day so i would think mods along these lines would put you near a stock terminator.

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 15 Cheap Mods - 15 No-Buck And Low-Buck Mods
    By Ed Blown Vert in forum Firebird / WS6
    Replies: 0
    Last Post: 03-05-2012, 05:20 PM
  2. 2004 Cobra w/mods Vs. R34 Skyline w/mods
    By Packy in forum Kill Stories
    Replies: 88
    Last Post: 08-31-2009, 07:26 PM
  3. Question: Mods
    By repeter in forum GTO
    Replies: 1
    Last Post: 02-15-2009, 02:00 PM
  4. Question: doing mods
    By cramn4903 in forum Camaro / SS
    Replies: 9
    Last Post: 02-09-2009, 06:18 PM
  5. $2000 on suspension mods or on motor mods??
    By greatwhiteZ28 in forum Suspension and Handling
    Replies: 6
    Last Post: 09-27-2007, 07:04 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •