Page 6 of 8 FirstFirst ... 2345678 LastLast
Results 101 to 120 of 146

SRT-4???? Did i just get my behind handed to me?

This is a discussion on SRT-4???? Did i just get my behind handed to me? within the Kill Stories forums, part of the Racing Forums category; Originally Posted by wooddaniel One of the ugliest cars on the road IMO. Right up there with the Aztek. The ...

  1. #101
    Sarge for AAG Emperor hutch1999's Avatar
    Join Date
    Jul 2006
    Location
    IL
    Posts
    3,779

    06 HD Softail
    1998 Trans Am m6

    Quote Originally Posted by wooddaniel View Post
    One of the ugliest cars on the road IMO. Right up there with the Aztek. The caliber looks ok I think though. My wife wanted a Caliber but we ended up getting an avenger instead. Kinda looks like a small charger
    lets not bring up the aztek lol it was a giant waste of time and money...

  2. #102
    Army of 1 wooddaniel's Avatar
    Join Date
    Nov 2006
    Location
    Alachua, Fl
    Age
    36
    Posts
    1,733

    Ignition Orange/Black
    2008 G8 GT, 98 Z28 383

    Quote Originally Posted by hutch1999 View Post
    lets not bring up the aztek lol it was a giant waste of time and money...
    Dear God. When I saw it on the lot when I bought my first T/A I almost threw up

  3. #103
    Sarge for AAG Emperor hutch1999's Avatar
    Join Date
    Jul 2006
    Location
    IL
    Posts
    3,779

    06 HD Softail
    1998 Trans Am m6

    Quote Originally Posted by wooddaniel View Post
    Dear God. When I saw it on the lot when I bought my first T/A I almost threw up
    im sure, you are really craving attention if you are driving a aztek

  4. #104
    Army of 1 wooddaniel's Avatar
    Join Date
    Nov 2006
    Location
    Alachua, Fl
    Age
    36
    Posts
    1,733

    Ignition Orange/Black
    2008 G8 GT, 98 Z28 383

    Quote Originally Posted by hutch1999 View Post
    im sure, you are really craving attention if you are driving a aztek
    I used to be a car salesman. I worked for the Dodge dealership here in town. We got a used Aztek on a trade in and when I quit a year later it was still for sale. We couldn't give that fucker away.

  5. #105
    Member Cronex's Avatar
    Join Date
    Jul 2007
    Location
    Philadelphia, PA
    Posts
    367

    Pewter
    2001 Trans Am #693

    Yeah, the Aztek wasn't the best looking. Would still take it over other vehicles though.

  6. #106
    Army of 1 wooddaniel's Avatar
    Join Date
    Nov 2006
    Location
    Alachua, Fl
    Age
    36
    Posts
    1,733

    Ignition Orange/Black
    2008 G8 GT, 98 Z28 383

    Quote Originally Posted by Cronex View Post
    Yeah, the Aztek wasn't the best looking. Would still take it over other vehicles though.
    Maybe over a Moped...

  7. #107
    Sarge for AAG Emperor hutch1999's Avatar
    Join Date
    Jul 2006
    Location
    IL
    Posts
    3,779

    06 HD Softail
    1998 Trans Am m6

    Quote Originally Posted by cronex View Post
    yeah, the aztek wasn't the best looking. Would still take it over other vehicles though.
    pinto

  8. #108
    Member first01SS's Avatar
    Join Date
    May 2008
    Location
    Dallas, TX
    Age
    37
    Posts
    184

    Pewter
    2001 Camaro Z28, Bolt-Ons

    Yeah, obviously not married lol. Its a lot easier to get what i want, if she gets whats. And to be honest, i don't want to get her crap. She wants to be competitive. She likes burning ricers just as much as i do. By the way, in regards to this original thread; i'm seeking heads+cam+n20 for my next encounter. I should be getting my lid in today, and i'm also ordering cut-outs today, to be in next week. Also, what would be a good older car to drop an LS1 into (60s-70's)

  9. #109
    Quote Originally Posted by first01SS View Post
    Yeah, obviously not married lol. Its a lot easier to get what i want, if she gets whats. And to be honest, i don't want to get her crap. She wants to be competitive. She likes burning ricers just as much as i do. By the way, in regards to this original thread; i'm seeking heads+cam+n20 for my next encounter. I should be getting my lid in today, and i'm also ordering cut-outs today, to be in next week. Also, what would be a good older car to drop an LS1 into (60s-70's)
    Why don't you pick up a RWD import ricer car like mine that weighs in the 2000lbs range. Drop the LS1 in that and run mid 11s with bolt ons.

    Get a stock one, that hasn't been riced like this:



    .... for under $1500 and have at it.
    Last edited by Superluminal; 01-07-2009 at 12:14 PM.

  10. #110
    LSX whore allbaugh_04's Avatar
    Join Date
    Mar 2007
    Location
    Omaha, NE
    Age
    32
    Posts
    5,895

    Pewter
    2000 Z28 Camaro

    Quote Originally Posted by Crimson Sin View Post
    Stall Speed Convertor and External Cooler.
    Dyno Tune (and get your shift points and pressures re-worked)
    Lid.
    Cat-back.
    and No more Roll Racing at 60 in an A4.
    Listen to this guy...

    Have you done a tune up yet, plugs and wires, fuel filter?

  11. #111
    Member first01SS's Avatar
    Join Date
    May 2008
    Location
    Dallas, TX
    Age
    37
    Posts
    184

    Pewter
    2001 Camaro Z28, Bolt-Ons

    So far..

    Quote Originally Posted by allbaugh_04 View Post
    Listen to this guy...

    Have you done a tune up yet, plugs and wires, fuel filter?
    So far, I have purchased a computer controlled Progressive Nitrous controller:



    the HSW sudden impact wet plate nitrous kit



    Fuel pressure gauge, and fuel pressure safety switch


    Lid + High flow filter



    a Quicktime Electronic Exhaust cut-out (not installed yet, thats going in today), and TR55 plugs, that i intend on swapping out with TR56 plugs instead. I have NOT sprayed yet, nor had any additional tuning past the stock tune. My intention is to use a resistor attached to a relay to fool the IAT anytime the system is armed to get my 3 degrees of timing pulled so i don't damage the engine. I also intend on spraying right off the line, at 1200 RPM, at 20%, then gradually increasing to 100% over 3 seconds. I'm still not 100% sold on my plans of when to spray, because i haven't actually run it yet. The car has barely 30k miles on it as of right now, and i didn't feel that wires, fuel filter, etc was in order.. Hopefully this will defend me against the SRT-4 in the future... comments welcome...
    Last edited by first01SS; 01-12-2009 at 08:12 AM.

  12. #112
    Sarge for AAG Emperor hutch1999's Avatar
    Join Date
    Jul 2006
    Location
    IL
    Posts
    3,779

    06 HD Softail
    1998 Trans Am m6

    looks like your well on your way

  13. #113
    Member first01SS's Avatar
    Join Date
    May 2008
    Location
    Dallas, TX
    Age
    37
    Posts
    184

    Pewter
    2001 Camaro Z28, Bolt-Ons

    I sure hope so. He says he's got some 1400.00 turbo now, bigger injectors, and some other crap. I'm really hoping i don't get embarrassed again... Also, if you know where i can get a IAT female, and male dongle cable, that'd be appreciated....

  14. #114
    Quote Originally Posted by first01SS View Post
    I sure hope so. He says he's got some 1400.00 turbo now, bigger injectors, and some other crap. I'm really hoping i don't get embarrassed again... Also, if you know where i can get a IAT female, and male dongle cable, that'd be appreciated....
    Remember you are RWD with an A4 and nitrous. Big turbo or not.... he is FWD. If he's running a street tire and over 300whp he is going to spin his ass off, even with drag radials. Launch him from a dig and embarrass him.

    From a roll it's a different story. Let me know what this $1400 turbo setup is. What's the size and trim of the turbo, how much boost is he running, and what are his supporting mods. Feed me this info and I can give a a good estimate on what the car should be making power wise and how it should be performing. Depending on the size turbo, you could be in for a hurting from a roll.

  15. #115
    Member victor111262's Avatar
    Join Date
    Jan 2009
    Location
    oklahoma city
    Posts
    179

    White
    2001 Z28

    I raced an srt4 in my and beat it by like half car but my friend gto lost by 2 cars, my is a 2001 z28 M6, k&n filter, ls6 intake manifold, and still trying 2 figure out the supercharge noise o running street tires spins in 4th gear. And the gto is complete stock. also the srt4 is omost stock he said all he had was a tuner.

  16. #116
    Quote Originally Posted by victor111262 View Post
    I raced an srt4 in my and beat it by like half car but my friend gto lost by 2 cars, my is a 2001 z28 M6, k&n filter, ls6 intake manifold, and still trying 2 figure out the supercharge noise o running street tires spins in 4th gear. And the gto is complete stock. also the srt4 is omost stock he said all he had was a tuner.
    Looks like you all have high 13s cars.

  17. #117
    Member first01SS's Avatar
    Join Date
    May 2008
    Location
    Dallas, TX
    Age
    37
    Posts
    184

    Pewter
    2001 Camaro Z28, Bolt-Ons

    there have been no mods to his block, heads, pistons, or valvetrain. Just fuel injectors, and no line upgrades. He works in a retail store, fortunately I have the financial advantage....

  18. #118
    Sarge for AAG Emperor hutch1999's Avatar
    Join Date
    Jul 2006
    Location
    IL
    Posts
    3,779

    06 HD Softail
    1998 Trans Am m6

    Quote Originally Posted by Superluminal View Post
    Looks like you all have high 13s cars.
    lol you gotta give him mid 13s to low if he can drive an m6 even tho his car is basically bone stock except the k&n filter.

  19. #119
    Sarge for AAG Emperor hutch1999's Avatar
    Join Date
    Jul 2006
    Location
    IL
    Posts
    3,779

    06 HD Softail
    1998 Trans Am m6

    Quote Originally Posted by first01SS View Post
    there have been no mods to his block, heads, pistons, or valvetrain. Just fuel injectors, and no line upgrades. He works in a retail store, fortunately I have the financial advantage....
    money always wins, never get in a pissing match with someone with more money...

  20. #120
    Member first01SS's Avatar
    Join Date
    May 2008
    Location
    Dallas, TX
    Age
    37
    Posts
    184

    Pewter
    2001 Camaro Z28, Bolt-Ons

    With my current mods, do what kind of time do you think i'll be at? If this isn't enough, i'll be placing an order for heads+cam next week..... also, i just got my cut-out installed yesterday. That thing is God's gift to men.

Page 6 of 8 FirstFirst ... 2345678 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Got it handed to me!!
    By TRAINSLS1 in forum Kill Stories
    Replies: 9
    Last Post: 01-10-2008, 03:50 PM
  2. Got my ass handed to me
    By 2000T/A Guru in forum Kill Stories
    Replies: 38
    Last Post: 08-09-2007, 03:33 PM
  3. got my ass handed to me
    By third_shift|studios in forum Kill Stories
    Replies: 6
    Last Post: 12-26-2005, 03:48 PM
  4. got my ass handed to me
    By bloodxnightmare in forum Kill Stories
    Replies: 9
    Last Post: 12-25-2005, 11:14 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •