Page 4 of 5 FirstFirst 12345 LastLast
Results 61 to 80 of 100

Mach1 Mayhem

This is a discussion on Mach1 Mayhem within the Kill Stories forums, part of the Racing Forums category; is this correctd by sae--i dont uderstand...

  1. #61
    ILL SKEET IN YUR EYE
    Join Date
    Jun 2006
    Location
    bay area california
    Posts
    321

    black on black on black
    02 z28

    is this correctd by sae--i dont uderstand

  2. #62
    Rollo Tomassee AKIRA's Avatar
    Join Date
    Aug 2005
    Location
    Outside the box
    Age
    37
    Posts
    2,887
    Quote Originally Posted by Angus66 View Post
    The '99 - '04 GT has a 260 hp SOHC 2V engine that makes power until ~ 6000 rpm or so.

    The '03 - '04 Mach 1 has a 330 - 335 hp DOHC 4V that will rev up to 7000 rpm.
    (They were factory-rated @ 305 hp/320 tq in '03 & 310 hp/320 tq in '04 but were both under rated quite a bit)

    The Mach also has 3.55 gears vs the 3.27's in the GT.

    Mach's have an aluminum engine block (which saves ~ 80 - 90 lbs) while the GT has an iron block. The weight savings of the block is somewhat cancelled-out by the heavier DOHC heads & (2) extra cams.

    The GT's have a cast iron crank while the Mach has a forged steel crank.

    A full bolt-on GT can make ~ 270 rwhp while a stock Mach can easily exceed that bone-stock.

    Bolt-on Mach's can hit 320 - 335 or so rwhp when tuned correctly...

    Thank you, that info was beautiful. Now I know why theyre stronger cars. How much are they?


    Oh and this is one of the worst arguments. Talk about a low degree, flamefest.

  3. #63
    King 0f n00bz shady milkman's Avatar
    Join Date
    Jan 2006
    Location
    Shepherd, Michigan
    Age
    29
    Posts
    11,775

    blacker than wesleysnipes
    98' trans am

    Quote Originally Posted by AKIRA View Post
    Thank you, that info was beautiful. Now I know why theyre stronger cars. How much are they?


    Oh and this is one of the worst arguments. Talk about a low degree, flamefest.
    yea i know i sorta started it.i'm still young but we moved it to pm. i just like to stick up for mustang owners..becuase there are alot of cobras and machs and some gts that are some serious cars..and i hate how certain people start shit with people for no aparent reason besides being a dick..i got into a tuffel with wesman..it was short, and some rx-7 owner and now bp..its never anything personal ... it gets old..and prob eventually i'll stop letting it bother me..but i think it just makes our board look bad to "outsiders"
    Last edited by shady milkman; 11-01-2006 at 06:24 PM.

  4. #64
    ILL SKEET IN YUR EYE
    Join Date
    Jun 2006
    Location
    bay area california
    Posts
    321

    black on black on black
    02 z28

    lil pussies -go ahead move it to pm-then you can call eaCHOTHER AND SAY HOW FAST YOUR BOLT ON MACH 1 CARS ARE

  5. #65
    ILL SKEET IN YUR EYE
    Join Date
    Jun 2006
    Location
    bay area california
    Posts
    321

    black on black on black
    02 z28

    Stay On The Boards Or Start Your Own Forum

  6. #66
    King 0f n00bz shady milkman's Avatar
    Join Date
    Jan 2006
    Location
    Shepherd, Michigan
    Age
    29
    Posts
    11,775

    blacker than wesleysnipes
    98' trans am

    who is this guy??.... anyone..man this thread is getting old i think its about time for a
    mods- suncoast creations hood with functional lt1 style airbox, ls6 intake, QTP longtube headers, QTP ORY, UMI SFC, Adj. LCA with relo brackets, UMI adj. panhard bar, Koni SA and strano springs,Torq Thrust M 17s 9.5 and 10.5 with nitto 555Rs, tuned by Frost
    Quote Originally Posted by Modulistic View Post
    sometimes you get owned, sometimes you own.

  7. #67
    ILL SKEET IN YUR EYE
    Join Date
    Jun 2006
    Location
    bay area california
    Posts
    321

    black on black on black
    02 z28

    NO THIS ONE WAS FUNNY!... i want more stock mach 1 drivers to come to ls1.com

  8. #68
    Senior Member mrr23's Avatar
    Join Date
    Jul 2005
    Location
    orlando, fl
    Posts
    7,134

    dark bowling green
    2000 corvette

    Quote Originally Posted by breakparts View Post
    lil pussies -go ahead move it to pm-then you can call eaCHOTHER AND SAY HOW FAST YOUR BOLT ON MACH 1 CARS ARE

    got as problem with them doing it the right way?

  9. #69
    SUPREME member-oderator oneBADDz's Avatar
    Join Date
    Nov 2005
    Location
    Lost in Texas
    Age
    34
    Posts
    2,683

    Custom Slate Blue
    99 B4C

    Actually not all Mach1s have the forged steel crank, only the standards do. Autos have a diff crank (ask ford why) that's why the autos have a lower redline than the standards. IMO, the auto Mach isn't much better than the GT. The stardards run pretty good, but the auto's are not so bueno

  10. #70
    The Bandit Wesman's Avatar
    Join Date
    Apr 2006
    Location
    NJ
    Posts
    4,033

    SGM
    1998 Trans Am WS6

    Quote Originally Posted by oneBADDz View Post
    Actually not all Mach1s have the forged steel crank, only the standards do. Autos have a diff crank (ask ford why) that's why the autos have a lower redline than the standards. IMO, the auto Mach isn't much better than the GT. The stardards run pretty good, but the auto's are not so bueno
    Seems that Ford automatics just suck, because I've never seen a Mustang that ran good with an auto. The 99-04 GT's were mid 6 second cars with the auto, and the Mach 1's weren't much better. I suppose crappy gear ratios and higher drivetrain loss really takes its toll on power.

  11. #71
    Member Mach1Mustang's Avatar
    Join Date
    Mar 2006
    Location
    Concord, NC
    Age
    33
    Posts
    203

    Blue
    04 Mach 1

    yeh the autos are not that great, but they are still powerful for a mustang. Much more so than the GT. On the bright side i ran a 02 zo6 last sunday at the drag strip. He out ran me by .003 of a second. My 8.233 to his 8.230. He did trap almost 3 mph higher than me though!! It was bone stock with 4k miles. My buddy just bought it.

  12. #72
    Evr sena bdgr killa snak? Roastem's Avatar
    Join Date
    Dec 2005
    Location
    Research Triangle Park, NC
    Age
    40
    Posts
    1,812

    Pewter
    '99 Z28 M6

    Quote Originally Posted by oneBADDz View Post
    Actually not all Mach1s have the forged steel crank, only the standards do. Autos have a diff crank (ask ford why) that's why the autos have a lower redline than the standards. IMO, the auto Mach isn't much better than the GT. The stardards run pretty good, but the auto's are not so bueno
    I didn't not know that. Learn sumthin' erry day.

  13. #73
    ILL SKEET IN YUR EYE
    Join Date
    Jun 2006
    Location
    bay area california
    Posts
    321

    black on black on black
    02 z28

    Yes Verry Good Info ---jesus

  14. #74
    Evr sena bdgr killa snak? Roastem's Avatar
    Join Date
    Dec 2005
    Location
    Research Triangle Park, NC
    Age
    40
    Posts
    1,812

    Pewter
    '99 Z28 M6

    Sorry breakparts, didn't mean for my "learning something new" to ruin your entire day.

    I have a feeling you will get over it.

  15. #75
    ILL SKEET IN YUR EYE
    Join Date
    Jun 2006
    Location
    bay area california
    Posts
    321

    black on black on black
    02 z28

    i was saying cuz one bad z has a pic of jesus

  16. #76
    Evr sena bdgr killa snak? Roastem's Avatar
    Join Date
    Dec 2005
    Location
    Research Triangle Park, NC
    Age
    40
    Posts
    1,812

    Pewter
    '99 Z28 M6

    My bad

  17. #77
    ILL SKEET IN YUR EYE
    Join Date
    Jun 2006
    Location
    bay area california
    Posts
    321

    black on black on black
    02 z28

    Anold Fo Govona Of- Kally Fonia-

  18. #78
    '03 Mach 1
    Join Date
    Aug 2005
    Location
    PA
    Age
    51
    Posts
    74

    Grey
    2003 Mach 1

    Quote Originally Posted by breakparts View Post
    lil pussies -go ahead move it to pm-then you can call eaCHOTHER AND SAY HOW FAST YOUR BOLT ON MACH 1 CARS ARE
    Is THIS fast enough for you?

    How 'bout THIS then?

    or maybe THIS???

    All on the stock long-block BTW, with no power-adder of any kind.
    '03 Mach 1
    Low 11's N/A on the factory long-block...
    ... a little faster on the juice.

  19. #79
    ILL SKEET IN YUR EYE
    Join Date
    Jun 2006
    Location
    bay area california
    Posts
    321

    black on black on black
    02 z28

    ok dip shit- if your p.o.s ford with no power adder can run that---WHAT THE FUUKK DO YOU THINK AN LS1 COULD DO ---- REMEMBER YOUR ON AN LS1 SITE

  20. #80
    King 0f n00bz shady milkman's Avatar
    Join Date
    Jan 2006
    Location
    Shepherd, Michigan
    Age
    29
    Posts
    11,775

    blacker than wesleysnipes
    98' trans am

    Quote Originally Posted by breakparts View Post
    ok dip shit- if your p.o.s ford with no power adder can run that---WHAT THE FUUKK DO YOU THINK AN LS1 COULD DO ---- REMEMBER YOUR ON AN LS1 SITE
    breakparts buddy calm down i dont want you to get banned. i'm sure the mods are watching...they always are

Page 4 of 5 FirstFirst 12345 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. mayhem festival 09
    By issues in forum Almost Anything Goes
    Replies: 2
    Last Post: 01-28-2009, 04:12 AM
  2. Mach1 Vs Z28 - The Result
    By Rikki_SeVeN in forum Kill Stories
    Replies: 98
    Last Post: 10-24-2007, 01:22 PM
  3. Discuss: Mach1 vs Z28
    By Rikki_SeVeN in forum Kill Stories
    Replies: 61
    Last Post: 10-22-2007, 09:25 AM
  4. LT1 vs. Mach1
    By JwMonE99 in forum Kill Stories
    Replies: 31
    Last Post: 07-30-2007, 09:45 PM
  5. FS:04 Mach1 AB,28,000miles,$16,900
    By ArcherandSons in forum Vehicles For Sale / Trade
    Replies: 0
    Last Post: 06-19-2007, 08:55 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •