Page 1 of 5 12345 LastLast
Results 1 to 20 of 95

05 stang goes down....

This is a discussion on 05 stang goes down.... within the Kill Stories forums, part of the Racing Forums category; so my cousin came down today with his 05 stang, complete with full array of bolt-ons. long tubes, catless x-pipe, ...

  1. #1
    Senior Member big hammer's Avatar
    Join Date
    Nov 2007
    Location
    manitoba, canada
    Posts
    1,731

    silver
    2002 ws6

    05 stang goes down....

    so my cousin came down today with his 05 stang, complete with full array of bolt-ons. long tubes, catless x-pipe, CAI, programmer, mustang attitude...

    so he wanted to race my ws6, which i have a little exhaust work, CAI, ported tb and a programmer.

    race1: i REALLY shit the bed on the launch (slept, then spun out) and he got a couple lengths on me right out of the hole. i was running him down hard but couldnt quite catch him in the 1\4.. lost by half a car.

    race2: i started paying more attention, and nailed my launch and he spun out and just quit. i was like 3 cars ahead by 60 mph

    race 3: we both nailed our launch perfectly. side by side till top of 2nd i started to pull. 3rd i was running all over him. by the end of the 1\4 i had a good 2-3 cars

    race 4: same.

    race 5: same

    i must say though he was quite humble and gracious in defeat. those little fuckers are quick out of the hole so you better bring your A game!

    i should have a vid of this in a few days possibly

  2. #2
    ls1ftw tigersport14's Avatar
    Join Date
    Sep 2006
    Location
    Tulsa
    Age
    29
    Posts
    2,035

    NBM
    98 trans am

    good run man

  3. #3
    LTX N20LT4's Avatar
    Join Date
    May 2007
    Location
    Cali
    Posts
    2,006
    10's N/A

    Good runs.

  4. #4
    Member Camarofan's Avatar
    Join Date
    Mar 2006
    Location
    Colorado
    Posts
    316

    Black
    05 mustang GT modded

    Quote Originally Posted by big hammer View Post

    so he wanted to race my ws6, which i have a little exhaust work, CAI, ported tb and a programmer.


    i must say though he was quite humble and gracious in defeat. those little fuckers are quick out of the hole so you better bring your A game!

    i should have a vid of this in a few days possibly
    First of all, NICE KILL.


    But........


    Damn, that's all you have? Not Heads and Camwork? Not even full exhaust? I wish I could run you! Esp, since you hate Mustangs so much. You are the EXACT type of guy I like to add to my kill list. Sorry, but it would be a pleasure to beat that WS6. Beautiful car. The best F-body IMO, but I'd have to kill it. I'd have to watch you look puzzled cuz I'm not supercharged and I beat you. I would just say you have been listening to the forums too much. I'm sure you'd get me on the highway, but not in the 1/4. I don't know what they put down after your mods, but if you beat me, it wouldn't be by more than a car. I don't think you could get me everytime though. I'd bet on that. I thought maybe you had done the full Headwork and cam thing at least since most ls1 guys brag about beating bolt on Stangs when they have Cams, turbos and stuff. YOu would ,most likely, run strong 13's here. Good stock Termie drivers run 13.7 to 14.1 or so. The guys with really made over LS1's usually run mid to low 12's here if they're launching well and not spinning. Bolt on LS1's run 13's out here. I don't have all the bolt ons for my car and it's cracked 13's already.(Average D/A's are about 8000ft)

    You're race description sounded about right. My point was illustrated. If you think you can sleep on the 3v, you're gonna get beat. I don't know if your friend(M5 or A4?) had tires and was hooking, but if he had stock rubber, his mods were a waste. Stock for stock, you guys have more meat on your cars. You learned by the second race and started to realize you had a challenge. I ran my buddies SS from the bottom of second to the top of 3rd, and he has Headwork and cams, full exhaust, timing chain(I dunno some kinda fancy chain), and had a damn good tuner. All I know is he has Vipers and shit on his kill list. We stayed even till midway through 3rd, then that thing was out midway into 3rd!!! In the 1/4, he has to work at it to catch me cuz he's on stock rubber, but he gets me at about the 1/8 mile and just screams past me, so I know what the LS1 can do with some work in it. I use his car as a gauge cuz it's LS1 at it's best. I know you can't wipe the floor with my friends SS so that puts you closer to my catagory. Anyways, If an LS1/2 isn't modded like my buddies SS, I'm not worried bout it.
    Last edited by Camarofan; 07-14-2008 at 01:59 AM.

  5. #5
    Army Dude robcas47's Avatar
    Join Date
    Nov 2007
    Location
    Ft. Rucker Area, Lower AL
    Posts
    674

    Arctic White
    01 TA / 06 Duc 749D

    Nice Kill man. Camarofan could have just left it at that.

  6. #6
    Member Camarofan's Avatar
    Join Date
    Mar 2006
    Location
    Colorado
    Posts
    316

    Black
    05 mustang GT modded

    Quote Originally Posted by robcas47 View Post
    Nice Kill man. Camarofan could have just left it at that.

    Nah, there's more to things than that. Hammer's one of those guys that thinks he can't be beaten by a non supercharged Stang, so I had to comment. I mentioned an LS2 kill(OMG) and some of the boyz got upset and ranted about it, cept I didn't get a "nice kill" so... There ya go, two way street. Plus, I like Hammer and a few others on here. He's the kinda guy I'd like to defeat. All in good rivalry for me.


    Okay, okay, I'll leave the thread, but Hammer, bet you can't catch me in the 1/4. Your buddies are here, so I have to go.
    Last edited by Camarofan; 07-14-2008 at 02:39 AM.

  7. #7
    Senior Member big hammer's Avatar
    Join Date
    Nov 2007
    Location
    manitoba, canada
    Posts
    1,731

    silver
    2002 ws6

    Quote Originally Posted by Camarofan View Post
    First of all, NICE KILL.


    But........


    Damn, that's all you have? Not Heads and Camwork? Not even full exhaust? I wish I could run you! Esp, since you hate Mustangs so much. You are the EXACT type of guy I like to add to my kill list. Sorry, but it would be a pleasure to beat that WS6. Beautiful car. The best F-body IMO, but I'd have to kill it. I'd have to watch you look puzzled cuz I'm not supercharged and I beat you. I would just say you have been listening to the forums too much. I'm sure you'd get me on the highway, but not in the 1/4. I don't know what they put down after your mods, but if you beat me, it wouldn't be by more than a car. I don't think you could get me everytime though. I'd bet on that. I thought maybe you had done the full Headwork and cam thing at least since most ls1 guys brag about beating bolt on Stangs when they have Cams, turbos and stuff. YOu would ,most likely, run strong 13's here. Good stock Termie drivers run 13.7 to 14.1 or so. The guys with really made over LS1's usually run mid to low 12's here if they're launching well and not spinning. Bolt on LS1's run 13's out here. I don't have all the bolt ons for my car and it's cracked 13's already.(Average D/A's are about 8000ft)

    You're race description sounded about right. My point was illustrated. If you think you can sleep on the 3v, you're gonna get beat. I don't know if your friend(M5 or A4?) had tires and was hooking, but if he had stock rubber, his mods were a waste. Stock for stock, you guys have more meat on your cars. You learned by the second race and started to realize you had a challenge. I ran my buddies SS from the bottom of second to the top of 3rd, and he has Headwork and cams, full exhaust, timing chain(I dunno some kinda fancy chain), and had a damn good tuner. All I know is he has Vipers and shit on his kill list. We stayed even till midway through 3rd, then that thing was out midway into 3rd!!! In the 1/4, he has to work at it to catch me cuz he's on stock rubber, but he gets me at about the 1/8 mile and just screams past me, so I know what the LS1 can do with some work in it. I use his car as a gauge cuz it's LS1 at it's best. I know you can't wipe the floor with my friends SS so that puts you closer to my catagory. Anyways, If an LS1/2 isn't modded like my buddies SS, I'm not worried bout it.

    his car is m5 and mine is an m6.

    the stang was just out performed plain and simple. even when we we're side by side off the launch, by the top of second he couldnt hang.

    ls1 cars are just faster. deal with it.

  8. #8
    Senior Member 01ws6er's Avatar
    Join Date
    Oct 2007
    Location
    The 717
    Age
    30
    Posts
    2,471

    Red
    2001 Trash Can

    Quote Originally Posted by Camarofan View Post
    First of all, NICE KILL.


    But........


    Damn, that's all you have? Not Heads and Camwork? Not even full exhaust? I wish I could run you! Esp, since you hate Mustangs so much. You are the EXACT type of guy I like to add to my kill list. Sorry, but it would be a pleasure to beat that WS6. Beautiful car. The best F-body IMO, but I'd have to kill it. I'd have to watch you look puzzled cuz I'm not supercharged and I beat you. I would just say you have been listening to the forums too much. I'm sure you'd get me on the highway, but not in the 1/4. I don't know what they put down after your mods, but if you beat me, it wouldn't be by more than a car. I don't think you could get me everytime though. I'd bet on that. I thought maybe you had done the full Headwork and cam thing at least since most ls1 guys brag about beating bolt on Stangs when they have Cams, turbos and stuff. YOu would ,most likely, run strong 13's here. Good stock Termie drivers run 13.7 to 14.1 or so. The guys with really made over LS1's usually run mid to low 12's here if they're launching well and not spinning. Bolt on LS1's run 13's out here. I don't have all the bolt ons for my car and it's cracked 13's already.(Average D/A's are about 8000ft)

    You're race description sounded about right. My point was illustrated. If you think you can sleep on the 3v, you're gonna get beat. I don't know if your friend(M5 or A4?) had tires and was hooking, but if he had stock rubber, his mods were a waste. Stock for stock, you guys have more meat on your cars. You learned by the second race and started to realize you had a challenge. I ran my buddies SS from the bottom of second to the top of 3rd, and he has Headwork and cams, full exhaust, timing chain(I dunno some kinda fancy chain), and had a damn good tuner. All I know is he has Vipers and shit on his kill list. We stayed even till midway through 3rd, then that thing was out midway into 3rd!!! In the 1/4, he has to work at it to catch me cuz he's on stock rubber, but he gets me at about the 1/8 mile and just screams past me, so I know what the LS1 can do with some work in it. I use his car as a gauge cuz it's LS1 at it's best. I know you can't wipe the floor with my friends SS so that puts you closer to my catagory. Anyways, If an LS1/2 isn't modded like my buddies SS, I'm not worried bout it.

    Make sure you race a black Ws.6 if you happen to see it running around Denver!!!

    And lets see a list of mods....You're an idiot; stock for stock, mod for mod you will lose every time...There is a guy on here that has tried to make this point (think his 05 stang runs low 12's) and even he is smart enough to admit that you can not replace displacement. Just wait until the new Camaro comes out and your Stang will have trouble keeping up with the v6.

  9. #9
    Senior Member 01ws6er's Avatar
    Join Date
    Oct 2007
    Location
    The 717
    Age
    30
    Posts
    2,471

    Red
    2001 Trash Can

    Nice kill Hammer!

  10. #10
    Member Justin93's Avatar
    Join Date
    Oct 2007
    Location
    CANFIELD, OHIO
    Age
    31
    Posts
    654

    PEWETER METALIC
    2002 CAMARO Z-28 M-6

    Good clean kill man

  11. #11
    LTX N20LT4's Avatar
    Join Date
    May 2007
    Location
    Cali
    Posts
    2,006
    10's N/A

    Quote Originally Posted by Camarofan View Post
    First of all, NICE KILL.


    But........


    Damn, that's all you have? Not Heads and Camwork? Not even full exhaust? I wish I could run you! Esp, since you hate Mustangs so much. You are the EXACT type of guy I like to add to my kill list. Sorry, but it would be a pleasure to beat that WS6. Beautiful car. The best F-body IMO, but I'd have to kill it. I'd have to watch you look puzzled cuz I'm not supercharged and I beat you. I would just say you have been listening to the forums too much. I'm sure you'd get me on the highway, but not in the 1/4. I don't know what they put down after your mods, but if you beat me, it wouldn't be by more than a car. I don't think you could get me everytime though. I'd bet on that. I thought maybe you had done the full Headwork and cam thing at least since most ls1 guys brag about beating bolt on Stangs when they have Cams, turbos and stuff. YOu would ,most likely, run strong 13's here. Good stock Termie drivers run 13.7 to 14.1 or so. The guys with really made over LS1's usually run mid to low 12's here if they're launching well and not spinning. Bolt on LS1's run 13's out here. I don't have all the bolt ons for my car and it's cracked 13's already.(Average D/A's are about 8000ft)

    You're race description sounded about right. My point was illustrated. If you think you can sleep on the 3v, you're gonna get beat. I don't know if your friend(M5 or A4?) had tires and was hooking, but if he had stock rubber, his mods were a waste. Stock for stock, you guys have more meat on your cars. You learned by the second race and started to realize you had a challenge. I ran my buddies SS from the bottom of second to the top of 3rd, and he has Headwork and cams, full exhaust, timing chain(I dunno some kinda fancy chain), and had a damn good tuner. All I know is he has Vipers and shit on his kill list. We stayed even till midway through 3rd, then that thing was out midway into 3rd!!! In the 1/4, he has to work at it to catch me cuz he's on stock rubber, but he gets me at about the 1/8 mile and just screams past me, so I know what the LS1 can do with some work in it. I use his car as a gauge cuz it's LS1 at it's best. I know you can't wipe the floor with my friends SS so that puts you closer to my catagory. Anyways, If an LS1/2 isn't modded like my buddies SS, I'm not worried bout it.
    You give all Mustang owners a bad name. Pure ignorance.
    Last edited by N20LT4; 07-14-2008 at 09:43 AM.

  12. #12
    ls1ftw tigersport14's Avatar
    Join Date
    Sep 2006
    Location
    Tulsa
    Age
    29
    Posts
    2,035

    NBM
    98 trans am

    Quote Originally Posted by Camarofan View Post
    First of all, NICE KILL.


    But........


    Damn, that's all you have? Not Heads and Camwork? Not even full exhaust? I wish I could run you! Esp, since you hate Mustangs so much. You are the EXACT type of guy I like to add to my kill list. Sorry, but it would be a pleasure to beat that WS6. Beautiful car. The best F-body IMO, but I'd have to kill it. I'd have to watch you look puzzled cuz I'm not supercharged and I beat you. I would just say you have been listening to the forums too much. I'm sure you'd get me on the highway, but not in the 1/4. I don't know what they put down after your mods, but if you beat me, it wouldn't be by more than a car. I don't think you could get me everytime though. I'd bet on that. I thought maybe you had done the full Headwork and cam thing at least since most ls1 guys brag about beating bolt on Stangs when they have Cams, turbos and stuff. YOu would ,most likely, run strong 13's here. Good stock Termie drivers run 13.7 to 14.1 or so. The guys with really made over LS1's usually run mid to low 12's here if they're launching well and not spinning. Bolt on LS1's run 13's out here. I don't have all the bolt ons for my car and it's cracked 13's already.(Average D/A's are about 8000ft)

    You're race description sounded about right. My point was illustrated. If you think you can sleep on the 3v, you're gonna get beat. I don't know if your friend(M5 or A4?) had tires and was hooking, but if he had stock rubber, his mods were a waste. Stock for stock, you guys have more meat on your cars. You learned by the second race and started to realize you had a challenge. I ran my buddies SS from the bottom of second to the top of 3rd, and he has Headwork and cams, full exhaust, timing chain(I dunno some kinda fancy chain), and had a damn good tuner. All I know is he has Vipers and shit on his kill list. We stayed even till midway through 3rd, then that thing was out midway into 3rd!!! In the 1/4, he has to work at it to catch me cuz he's on stock rubber, but he gets me at about the 1/8 mile and just screams past me, so I know what the LS1 can do with some work in it. I use his car as a gauge cuz it's LS1 at it's best. I know you can't wipe the floor with my friends SS so that puts you closer to my catagory. Anyways, If an LS1/2 isn't modded like my buddies SS, I'm not worried bout it.
    geeze someone is bitter about a mustang loss.....

  13. #13
    Member Justin93's Avatar
    Join Date
    Oct 2007
    Location
    CANFIELD, OHIO
    Age
    31
    Posts
    654

    PEWETER METALIC
    2002 CAMARO Z-28 M-6

    Quote Originally Posted by tigersport14 View Post
    geeze someone is bitter about a mustang loss.....
    haha he got butt hurt really quick! I talked my boss into racing me in his 07 GT, we have guys taking bets, so far Im the underdog but Im a way better drive than him. Were both mostly stock manual cars minus my K&N fipk and his ford racing cat back from the factory.

  14. #14
    Member
    Join Date
    Nov 2007
    Location
    SATX
    Posts
    847

    Pewter
    2000 Trans Am

    Quote Originally Posted by Camarofan View Post
    First of all, NICE KILL.


    But........


    Damn, that's all you have? Not Heads and Camwork? Not even full exhaust? I wish I could run you! Esp, since you hate Mustangs so much. You are the EXACT type of guy I like to add to my kill list. Sorry, but it would be a pleasure to beat that WS6. Beautiful car. The best F-body IMO, but I'd have to kill it. I'd have to watch you look puzzled cuz I'm not supercharged and I beat you. I would just say you have been listening to the forums too much. I'm sure you'd get me on the highway, but not in the 1/4. I don't know what they put down after your mods, but if you beat me, it wouldn't be by more than a car. I don't think you could get me everytime though. I'd bet on that. I thought maybe you had done the full Headwork and cam thing at least since most ls1 guys brag about beating bolt on Stangs when they have Cams, turbos and stuff. YOu would ,most likely, run strong 13's here. Good stock Termie drivers run 13.7 to 14.1 or so. The guys with really made over LS1's usually run mid to low 12's here if they're launching well and not spinning. Bolt on LS1's run 13's out here. I don't have all the bolt ons for my car and it's cracked 13's already.(Average D/A's are about 8000ft)

    You're race description sounded about right. My point was illustrated. If you think you can sleep on the 3v, you're gonna get beat. I don't know if your friend(M5 or A4?) had tires and was hooking, but if he had stock rubber, his mods were a waste. Stock for stock, you guys have more meat on your cars. You learned by the second race and started to realize you had a challenge. I ran my buddies SS from the bottom of second to the top of 3rd, and he has Headwork and cams, full exhaust, timing chain(I dunno some kinda fancy chain), and had a damn good tuner. All I know is he has Vipers and shit on his kill list. We stayed even till midway through 3rd, then that thing was out midway into 3rd!!! In the 1/4, he has to work at it to catch me cuz he's on stock rubber, but he gets me at about the 1/8 mile and just screams past me, so I know what the LS1 can do with some work in it. I use his car as a gauge cuz it's LS1 at it's best. I know you can't wipe the floor with my friends SS so that puts you closer to my catagory. Anyways, If an LS1/2 isn't modded like my buddies SS, I'm not worried bout it.
    Not to hijach but LOL at you Aatar I got that picture in my email yesterday.

    back to topic

    the mustangs are always quick out of the hole you can thank that good rear end they have.

  15. #15
    Senior Member big hammer's Avatar
    Join Date
    Nov 2007
    Location
    manitoba, canada
    Posts
    1,731

    silver
    2002 ws6

    was talkin to the guy tonight. he claims his car is dyno tuned to 360 rwhp. is that possible with full bolt ons and a tune?

  16. #16
    LTX N20LT4's Avatar
    Join Date
    May 2007
    Location
    Cali
    Posts
    2,006
    10's N/A

    Quote Originally Posted by big hammer View Post
    was talkin to the guy tonight. he claims his car is dyno tuned to 360 rwhp. is that possible with full bolt ons and a tune?
    Uhh...NO!

  17. #17
    Junior Member
    Join Date
    May 2008
    Location
    Indiana
    Posts
    70

    Black 99 Z71
    Red 01 Z28 M6

    1. "You are the EXACT type of guy I like to add to my kill list. Sorry, but it would be a pleasure to beat that WS6. Beautiful car. The best F-body IMO, but I'd have to kill it. I'd have to watch you look puzzled cuz I'm not supercharged and I beat you."

    2. "I'm sure you'd get me on the highway, but not in the 1/4. I don't know what they put down after your mods, but if you beat me, it wouldn't be by more than a car. I don't think you could get me everytime though. I'd bet on that."

    Ha ha, I think he is confused as to who would win? Idk, what all mods you got "Camarofan"? I love mustangs though, and too bad you and Hammer dont live closer or we could stop the talking and see what happens.
    2001 Z28 M6
    SLP Loudmouth 1 catback, functional ram air hood, Pro 5.0 shifter, free mods, HSW wet nitrous kit

  18. #18
    Senior Member big hammer's Avatar
    Join Date
    Nov 2007
    Location
    manitoba, canada
    Posts
    1,731

    silver
    2002 ws6

    Quote Originally Posted by N20LT4 View Post
    Uhh...NO!
    the guy isnt a bs-er. could be the dyno is incorrect.

  19. #19
    Senior Member big hammer's Avatar
    Join Date
    Nov 2007
    Location
    manitoba, canada
    Posts
    1,731

    silver
    2002 ws6

    Quote Originally Posted by zachj03 View Post
    1. "You are the EXACT type of guy I like to add to my kill list. Sorry, but it would be a pleasure to beat that WS6. Beautiful car. The best F-body IMO, but I'd have to kill it. I'd have to watch you look puzzled cuz I'm not supercharged and I beat you."

    2. "I'm sure you'd get me on the highway, but not in the 1/4. I don't know what they put down after your mods, but if you beat me, it wouldn't be by more than a car. I don't think you could get me everytime though. I'd bet on that."

    Ha ha, I think he is confused as to who would win? Idk, what all mods you got "Camarofan"? I love mustangs though, and too bad you and Hammer dont live closer or we could stop the talking and see what happens.
    i'd be up for that. if he wins i'll buy the beer.

  20. #20
    LTX N20LT4's Avatar
    Join Date
    May 2007
    Location
    Cali
    Posts
    2,006
    10's N/A

    Quote Originally Posted by big hammer View Post
    the guy isnt a bs-er. could be the dyno is incorrect.
    Bs-er or not, a 4.6 3-valve is not putting down 360rwhp with just bolt-ons. That would be more than a full bolt-on LS1 realistically speaking. And remember you said he claimed to have put that number down, meaning you didn't actually see proof.

Page 1 of 5 12345 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Evo vs my Stang
    By Crimson Sin in forum Kill Stories
    Replies: 56
    Last Post: 03-23-2009, 05:56 PM
  2. Stang Up!
    By TempleU_WS6 in forum Multimedia Section
    Replies: 8
    Last Post: 03-10-2009, 04:43 AM
  3. 04 C5 vs S/C stang
    By Danger731 in forum Kill Stories
    Replies: 6
    Last Post: 11-13-2008, 01:09 PM
  4. My T/A vs 01 Stang VID
    By eltransam2k in forum Kill Stories
    Replies: 66
    Last Post: 10-24-2008, 12:38 PM
  5. First Stang.....and second!
    By Arrison24 in forum Kill Stories
    Replies: 58
    Last Post: 03-01-2007, 11:56 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •