Results 1 to 11 of 11

UMI Performance

This is a discussion on UMI Performance within the Sponsor Feedback forums, part of the Sponsors Group Pricing and Parts Review category; I can't say enough on how happy I am with them. Ryan & Jerry were both a big help. Jerry ...

  1. #1
    Spaz is My Mentor SMWS6TA's Avatar
    Join Date
    Feb 2009
    Location
    Ugy Lower Corner of AL
    Posts
    10,511

    Navy Blue Metallic
    98 T/A w/a little mods...

    UMI Performance

    I can't say enough on how happy I am with them. Ryan & Jerry were both a big help.


    Jerry - great tech guy on the phone listen to my plans for my car and help me make adjustments to my purchase so that I wouldn't have any problems that they themselves have seen. Easy to get a hold of and always answered my questions.

    Ryan - also there with the quick response to my PM's.

    Order was shipped promptly and no issues.


    Install went great. I've never done LCA's or PHB before this job, the directions were spot on. It was harder to get my old TA off then it was to install the TA relocate kit and new full length TA.





    Excellent customer service!!!!!


    Can't wait for my next purchase.

  2. #2
    Excellent to hear, thanks again

  3. #3
    Senior Member kenro23's Avatar
    Join Date
    Feb 2011
    Location
    Houston
    Posts
    1,062

    Pewter
    '00 SS

    I have only talked to Jerry by email so far, and he has already been a big help. I cant wait for this extra cash to get here so l can go ahead and purchase my items.

    So, do you recommend I call and talk to Jerry like you did to see what else he may think I need?
    Suspension: Lower control arms (Spohn), Drive shaft safety loop, Torque arm (Edlebrock), Strut tower brace, Panhard Bar (BMR)

    Under the Hood: Smooth bellows, Lid, Catch can, LT Headers, ORY, AIR/EGR delete, Poly engine/transmission mounts,

    Exterior: Painted brake calipers (Red), Halo “Spyder” Headlights w/matching parking/turn signals (Black)

  4. #4
    Member derekbuckner1's Avatar
    Join Date
    Oct 2009
    Location
    West Virginia
    Posts
    451

    LPM
    2000 Z28

    Quote Originally Posted by kenro23 View Post
    I have only talked to Jerry by email so far, and he has already been a big help. I cant wait for this extra cash to get here so l can go ahead and purchase my items.

    So, do you recommend I call and talk to Jerry like you did to see what else he may think I need?
    Not a bad idea. Can't hurt anything to get a professional opinion.

    LS6 Intake, LS6 VCT, E^2 Catch Can, Hooker LTs and ORY, Magnaflow Cat-Back, 3" QTP electric cutout, UMI adj LCA, PHB, 3 pt SFCs, STB, MGW Shifter, SLP lid and bellow, Free-Mods, Tuned by BlueCat


  5. #5
    Super Moderator
    pajeff02's Avatar
    Join Date
    Feb 2009
    Location
    Mansfield, PA
    Posts
    21,576

    Black & Blue
    '02 WS.6 / '07 Suburban

    UMI has always been great to deal with -- I run their subframe connectors, panhard bar, lower control arms, and tunnel mount torque arm setup on our car. Still have the K-member and front control arms in the boxes awaiting installation. I always make it a point to stop in at their Carlisle booth to check out the new products and talk to Ryan for a bit. Just an all around good company with great people and products imo.

  6. #6
    Spaz is My Mentor SMWS6TA's Avatar
    Join Date
    Feb 2009
    Location
    Ugy Lower Corner of AL
    Posts
    10,511

    Navy Blue Metallic
    98 T/A w/a little mods...

    Jeff you could send them to me and I'll send you a pic of how it looks on the car

  7. #7
    James Bond Spikito's Avatar
    Join Date
    Aug 2007
    Location
    Texas
    Age
    30
    Posts
    4,546

    2001 3.8 Black - sold
    2000 SS Black M6

    havent dealt with them directly all that much, mostly throguh Mark at KYspeed....but they seem to make a very good team selling great products

  8. #8
    Super Moderator
    pajeff02's Avatar
    Join Date
    Feb 2009
    Location
    Mansfield, PA
    Posts
    21,576

    Black & Blue
    '02 WS.6 / '07 Suburban

    Quote Originally Posted by SMWS6TA View Post
    Jeff you could send them to me and I'll send you a pic of how it looks on the car


  9. #9
    Senior Member tatertot91's Avatar
    Join Date
    Oct 2008
    Location
    Coral Springs, Fl
    Posts
    5,773

    Sunset Orange Metalic
    2001 Camaro SS

    Same, have their sfcs and lca relocation brackets. Fitment was great and i plan on ordering more from them in the future

  10. #10
    Member MAXX2's Avatar
    Join Date
    Jan 2010
    Location
    Lovelock, Nevada
    Posts
    101

    'Brilliant black'
    1999 Firebird

    Absolutely Awesome to work with Ryan. We needed a special fabricated 'Engine Bay Brace', and he had it done and in our hands in a few days, including powder coating.

    Now it's the Front Suspension Setup with the SBC K-Member with Manual Rack.

    Thanks again Ryan, and the gang at UMI.

    MAXX
    Last edited by MAXX2; 12-31-2011 at 08:19 AM.

  11. #11
    Member sjgreen6's Avatar
    Join Date
    Dec 2009
    Location
    Jefferson City, MO
    Posts
    476

    Navy Blue
    2002 Trans Am WS6 Conv

    Just got in touch with UMI for a bolt kit. Although not listed as a separate part, they directed me to the warehouse. One quick phone call and the hardware kit was on the way. Especially happy that for once I'm buying stuff made in the USA. Great folks at UMI!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Chevy Performance unveils Camaro factory-built performance u
    By Ed Blown Vert in forum General Help
    Replies: 0
    Last Post: 10-09-2013, 05:11 AM
  2. June 2011 Chevy High Performance Bolt-Ons - Performance Gain
    By Ed Blown Vert in forum Camaro / SS
    Replies: 0
    Last Post: 04-28-2011, 03:20 PM
  3. March 2011 Chevy High Performance Q&A - Performance Q&A
    By Ed Blown Vert in forum Camaro / SS
    Replies: 0
    Last Post: 02-11-2011, 09:50 PM
  4. January 2011 Chevy High Performance Q&A - Performance Q&A
    By Ed Blown Vert in forum Camaro / SS
    Replies: 0
    Last Post: 12-10-2010, 04:01 AM
  5. Replies: 5
    Last Post: 11-14-2006, 06:15 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •