WTT my 69 for a Bike or sell outright

[killer01ws6]

I would like to trade her for a low miles/Good condition Cruiser 750 or better, Asking $6000.00 if no Bike to trade.

http://s22.photobucket.com/albums/b3...%20Trans%20AM/

Some of the pics are from when I brought her home, she has had the non running and not correct 396 taken out and proper yr correct and good running 400 and auto trans out of a buddies 69 GTO.

The motor and trans are not in her as I was going to do body work and paint then put them back in. They are stored in a storage building and get rotated every few weeks.

Floor pans as well as the trunk are solid. I have the one pic to show just light surface rust in the trunk.
The hood is up as there are no back bolts in it right now we just set it back on, the hood pins hold it on.
The driver side is solid no rust, the pass rear qtr does need a replacement skin to do it right. You can get one from Rock or Yearone for about 75.00
Drill is running the oil pump to keep things oiled, we also turn it over. Holley 600 is in my garage stored in a sealed bag.

I did not think to take any pics under the hood, but it has a MSD setup and the subframe is in great shape, no rust and solid front.

Front Disk brakes, rear are drum I am think. (forgot lol)

Here are some, inside, out, motor, top, where I put rust killer for the surface rust on the roof etc..
































PS, This is not my first post. My other 3K + posts disappeared lol. so I re-registered.

[killer01ws6]

I have my Kenwood single CD with removable Face plate, 6 CD Kenwood Changer, Kenwood EQ and Kenwood amp. (speakers I sold) that came out of my Vette... I was going to use in the car. it goes with the deal. With the speakers several years back, it was a 3k system.

[SIK02SS]

this isn't a real TA is it?

6000 includes the motor and tranny?

whats the condition of the driveline? driveshaft/rear end? any ideas?


if you could send me some additional pictures (the photobucket link doesn't work) to chrisronson@yahoo.com i would appreciate it..VIN number, all that stuff..

[killer01ws6]

From all of the research I have done, no it is not. it is a clone.

Yes 6k is for all of it.
The motor, trans are from a buddys 69 GTO they are in great shape. the rear end and driveshaft are there also and the rear has no leaks.

[SIK02SS]

From all of the research I have done, no it is not. it is a clone.

Yes 6k is for all of it.
The motor, trans are from a buddys 69 GTO they are in great shape. the rear end and driveshaft are there also and the rear has no leaks.

the engine in 'running condition'? or does it need some TLC before to turn it over? and i take it the tranny came off the GTO in working order?

[killer01ws6]

the engine in 'running condition'? or does it need some TLC before to turn it over? and i take it the tranny came off the GTO in working order?

The engine would need to retimed as I pull the distribitor to run the oil pump,
I have the carb in my garage, that would be the only thing that may need to be messed with would be if the seals in the carb dried. But I have had it is a sealed bag so it maybe fine.

But yes,
The Engine and tranny where running perfectly when pulled and stored.
No leaks from either.

[killer01ws6]

Still needs a new home folks.

[killer01ws6]

Situation change
I purchased a bike and have a potential sale of the car pending. So if this sale does not happen I will reopen a "For Sale" thread instead of this WTT one.

Thank you all for looking, if a Mod would please lock this thread.
I will not be checking it further.

Pete