Results 1 to 19 of 19
-
11-04-2008, 05:54 AM #1
WTT 10 sec 87 Grand National for LS1 Car
My GN is straight, not perfect, but no rust and drives perfectly. Engine is fresh with less than 2000 miles on it. Tranny just got back from Art Carr and has less than 100 miles on it. I don't have alot of pictures, but I can probably take some and post them. Car has Convo Pros (10s & 4s) on it now, but I have a nice set of factory GN wheels I'll throw in with it as well as some other spare parts. Car runs 10.70s on pump gas and alcohol injection. I'll take $9000.00 or possible trades.
Last edited by noslognv6; 11-10-2008 at 01:59 PM.
-
11-10-2008, 01:58 PM #2
-
11-10-2008, 03:18 PM #3
- Join Date
- Jul 2007
- Location
- tennessee
- Posts
- 2,010
- iTrader
- 0
TA-White, Camaro-Black- Track-TA98A4 DD-98z28M6
what does she trap......
what kind of ls you looking for?
heads cam? a4? whats up?
-
11-10-2008, 05:43 PM #4
-
11-10-2008, 05:47 PM #5
-
11-10-2008, 05:48 PM #6
Short Build List
Engine (Fresh - approx 1000 miles on rebuild)
Stock crank (cryo'd)
Forged pistons (cryo'd)
Stock Rods w/ ARP fasteners (cryo'd)
8445 heads extensively ported w/ Ferrea SS valves
Comp 212/212 FT (cryo'd) (always used EOS)
Intake ported to match heads
Plenum ported to match 62mm TB
Exhaust:
Turbonetics T70BB Turbo
ATR 3" SS external gate DP
Turbonetics Racegate external wastegate
CAS V2 Front mount intercooler
Stock <50K headers (perfect never welded never cracked)
Electronics:
Siemens 72# flowmatched injectors
Stock ECU modded with low Z injector drivers
Extender Extreme chip
LS1 3.5" MAF - (blow-thru)
Translator Version 6.22
AEM Tru-Boost electronic boost controller
Scanmaster 2.1
Alcohol Injection:
SMC non progressive with dual M15 nozzles
Transmission:
Art Carr transmission
Art Car "P" stall non lock torque converter
Lakewood DS loop
Hurst pistol grip Quarter Stick
Suspension:
SSM upper & lower CA's
Lakewood no hop bars
Full Throttle 1 3/8" solid rear sway bar (like old ATR)
Wheels:
Centerline Convo Pros 10's & 4's
Stock GN with centercaps
Brakes:
Vacuum conversion
Wilwood proportioning valve
S-10 rear cylinders
-
11-10-2008, 08:07 PM #7
- Join Date
- Jun 2008
- Location
- Annapolis, MD
- Posts
- 1,111
- iTrader
- 1 (100%)
BLK/BLK w/CGM Stripes- 2010 Camaro 2SS/M6
I'll trade you for my '98 T/A after I complete it (freshen up the top end and installed new clutch) whole combo has about 2-3K miles on it ... http://www.fquick.com/garages/Pontia...Am/1998/20776/ ... mods are on the page but a short list ... Koni's/ground controls, 18" Z06's, 6.0tlr forged, heads, cam, M6, etc. ... Engine ran low 11's with a TH350 with more to go before I swapped it out of my '94 Camaro into the T/A and did the M6 swap.
Last edited by Mean Green Z28; 11-10-2008 at 08:14 PM.
-
11-11-2008, 04:44 AM #8
-
11-11-2008, 04:55 PM #9
Car is sold. Thanks for looking.
-
11-11-2008, 05:17 PM #10
- Join Date
- Jun 2008
- Location
- Annapolis, MD
- Posts
- 1,111
- iTrader
- 1 (100%)
BLK/BLK w/CGM Stripes- 2010 Camaro 2SS/M6
Damn, that was a quick sale!
-
11-11-2008, 05:53 PM #11
- Join Date
- Jul 2007
- Location
- tennessee
- Posts
- 2,010
- iTrader
- 0
TA-White, Camaro-Black- Track-TA98A4 DD-98z28M6
wow.. what did she sell for?
-
11-12-2008, 05:56 AM #12
$9,000.00.
Faster than I thought, I must have had it under priced. Oh well, it was a fair price I think.
I'm in the market for an SS (98-02), less than 100K, A4, TT, Leather...anyone has such or close give me a holla!
-
11-12-2008, 12:17 PM #13
- Join Date
- Aug 2005
- Location
- cleveland ohio
- Posts
- 11,373
- iTrader
- 48 (100%)
trans am 00 ws6- 1998 camaro ss vert
would have been about 12k on ebay but it would have taken awhile. nice car. and good luck with your new one.
-
11-12-2008, 02:31 PM #14
-
11-12-2008, 03:23 PM #15
- Join Date
- Jul 2007
- Location
- tennessee
- Posts
- 2,010
- iTrader
- 0
TA-White, Camaro-Black- Track-TA98A4 DD-98z28M6
http://www.ls1tech.com/forums/vehicl...-t-7500-a.html
hes a good seller man.. i know him... and if you dont like all the white inside you can always buy stock, or you two could work something out...
i think he also has a set of TT2s.. not on the car of course.. he just took them off for those.. but he still has them...
and he is neg. on price, and would probably meet half way or deliver all the way..
-
11-12-2008, 03:50 PM #16
-
11-12-2008, 07:38 PM #17
Wow, thanks man. What an awesome gesture. I really would like to talk to him about that T/A...I like it. I'm very interested. Where is he located? If you talk to him again, tell him to get in touch with me via here or email atmathews@hotmail.com. Again, thank you very much for your help. You guys have a great forum here. I'm impressed. Seem like a good bunch of guys. I'll have to hang around!! Now I need to change my username!
-
11-12-2008, 07:39 PM #18
CETA
BTW, excuse my LS1 newbiness, what is the CETA mod? Is it the black around the rear bumper?
Last edited by noslognv6; 11-12-2008 at 07:44 PM.
-
11-12-2008, 08:35 PM #19
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
WTT 86 Grand National
By BlackHawk in forum Vehicles For Sale / TradeReplies: 16Last Post: 05-27-2009, 08:18 AM -
New Grand National
By knoll5150 in forum Classic MuscleReplies: 13Last Post: 02-11-2008, 02:19 PM -
FS or FT:87 Grand National
By 87_GN_NJ in forum Vehicles For Sale / TradeReplies: 0Last Post: 05-09-2006, 04:11 PM -
My Grand National for your LS1
By Fantom Infinity in forum Vehicles For Sale / TradeReplies: 5Last Post: 01-28-2006, 09:01 PM
Bookmarks