FS: 2000 Corvette vert - Procharged $43k

[JTE]

2000 Convertible Magnetic Red II, 1SC, Z51, 6 disc changer, A4
28,650 miles
490Rwhp / 426Rwtq tuned by FLP Finsh Line Performance in Naperville, Illinois

ATI Procharger P1SC, w/ twin intercoolers and 3.85" pulley
Lowered radiator for blower intake
Racetronix fuel pump
42#/hour injectors
LS6 intake manifold
LS6 valvesprings
Corsa Indy catback exhaust w/Daytona tips
FLP longtube headers and high flow cats
FLP level 4 4l60e transmission
Yank 3000 torque converter
DTE 3.73 rear differential w/ hardened output shaft
Cobalt boost and fuel pressure gauge in windshield pillar pod

Chrome Z06 wheels 18x9.5/12.0 with Michelin Pilot 335/30/18 and 275/35/18 tires and sensors currently off of the car - less than 8k miles

Chrome Y2K 18x9.5/10.5 wheels with Michelin Pilot 295/35/18 and 265/35/18 tires and sensors - less than 6k miles back on the car a few weeks ago

Baer 2 piece Eradispeed brake rotors front and rear

Powder coated brake calipers, brackets, and stainless steel pad covers

Motor City Mold carbon fiber hood with functional vent

Chrome seat hoops and interior pieces

Lots of chrome and painted pieces underhood

Over $36000 in mods
Current Kelley Blue Book private party retail for car is $26980

Asking $43000
Lots of pics here
http://www.johnearnest.com/index.html

$5,460.00 Supercharger ATI Procharger P1SC w/ dual intercoolers
$1,157.80 Install 850, pin damper 100, pin kit 162, shipping 28.14, tax 17.66
$864.89 Lower Radiator, new air intake, 160 thermostat
$109.82 LS6 Valve springs
$227.50 Install valve springs - FLP
$384.92 LS6 Intake
$185.93 Install Intake
$1,750.89 FLP Longtube headers and high flow cats-installed by FLP
$69.39 MSD Plugwires
$509.00 A&A Blower bracket
$150.00 Install bracket and belt - FLP
$2,307.45 FLP Level 4 transmission 2100, check valve 49.95, tax 157.50
$825.00 Yank 3000 Torque Converter
$480.00 Install trasmission and torque converter
$2,146.93 DTE 3.73 rear differential with hardened output - installed by FLP
$895.50 Corsa Indy catback exhaust w/ Daytona tips
$45.00 Install catback
$1,464.85 MCM Motor City Mold carbon fiber hood w/ functional vent
$762.36 Paint and install hood
$205.99 Cobalt boost gauge - 205.99
$283.23 Cobalt fuel preeure gauge - 245.99 - tax 37.24 for both gauges
$81.00 dual gauge pillar
$212.72 install gauges
$1,034.19 Racetronix fuel pump, 42#/hr injectors and installed by FLP
$550.00 Dynotune FLP - Finish Line Performance
$1,100.00 Chrome Z06 wheels 18x12 and 18x9.5 from House of Wheels
$1,035.00 Michelin Pilot 335/30/18 and 275/35/18 tires and pressure sensors
$1,600.00 Extra set wheels Chrome Y2K 18x9.5/10.5 265/95..35/18 Michelin Pilots
$1,080.56 Baer 2 piece EradisSpeed brake rotors front and rear
$160.50 Mount Street tires on Z06 wheels
$192.38 Paint radio bezel and radiator cover - installed myself
$120.39 Instrument panel gauge bezels - installed myself
$50.00 Valentine 1 remote display - installed remote display myself at top of DIC
$120.00 Loyds flormats w/ C5 emblem and letters NEW for car shows
$81.00 Loyds floormats w/ C5 emblem
$120.00 Chrome front / waterfall emblems (waterfall 66.94)
$184.61 MidAmerica Leather console cover/shift boot/door pulls + hood seal
$40.00 Corvette Acessories Unlimited Decals passenger airbag and door sill
$90.00 Billet door sill covers
$99.00 OEM Z06 front screens
$108.13 front brake duct screens 66.13 / fender screens 45.00
$1,200.00 HID 4300K headlights from ACA and installed
$104.97 Chrome hood shock covers and chrome headlight adj. knob covers
$1,821.56 CEC Chrome covers: Deluxe fuse, Power steering, Throttle body, Hood strikers and hinges, fender screws, door supports + strikers, dipstick handle, ALL etched caps
$314.00 CEC Chrome covers: battery / brake booster / master cylinder
$418.89 CEC Chrome intake manifold cover
$53.95 CEC Chrome hood hinge bolts
$248.63 KEWL painted fender well covers
$631.13 KEWL painted covers: fuel rail / surge tank / washer tank
$246.92 Custom powdercoated brake calipers and brackets from ThePowderCoater.com
$133.04 GM ceramic brake pads
$90.00 Polished stainless steel brake pad covers
$288.00 Install new powder coated brake calipers, brackets, pads, and pad covers
$13.46 Chrome valvestem caps
$260.00 Chrome 5 piece tailight grills
$100.00 Chrome inner door panel reflector
$631.00 Seat hoops and install
$120.00 Top Down Tech - Window Valet - remote control windows
$200.00 Subwoofer and box built and installed myself - Infinty Beta 10"
$200.00 Amplifier for subwoofer
$267.50 LS1 Supercharged fender badges
$89.90 Stainless steel rear letters
$129.99 CB antenna, bracket, and cable
$196.89 CB Cobra WXNWWST fully peaked and tweaked @ 31 watts
$143.44 Car cover Silvergaurd w/bag ________________________________________ ____________________________________
$36,249.20 Total for all modifactions

[JTE]

Bump up!

[MaceLeonheart]

Bump!!!

[Packy]

Nice car! What kind of traction does it get at the dragstrip? BTW - I grew up in East Moline, IL. I kind of laughed when I saw Coal Valley!

[JTE]

I grew up in East Moline also. I usuallly cut 1.8 to 1.9 60' with BFG drag radials. I haven't tried ET streets since I don't really want to break anything. The last time the car was at the strip was October 2005.