Results 1 to 7 of 7

87 T-type, speed & handling, for sale, trade? NJ

This is a discussion on 87 T-type, speed & handling, for sale, trade? NJ within the Vehicles For Sale / Trade forums, part of the Sponsors Group Pricing and Parts Review category; Wanted to throw this out there and see what everyone thinks it'd be worth...the one glaring negative is the trans ...

  1. #1
    Disciple of Speed ShadowHawk's Avatar
    Join Date
    Oct 2005
    Location
    Central NJ
    Posts
    204
    iTrader
    2 (100%)

    Black
    LS6 Swapped WS6

    87 T-type, speed & handling, for sale, trade? NJ

    Wanted to throw this out there and see what everyone thinks it'd be worth...the one glaring negative is the trans is stock and slips a bit, so eventually it'll need one. Other than that it's a clean car with literally A FORTUNE in it!! I just got the car for $13,500 and I have NO money right now to do anything so I'm contemplating letting it go. It's a sad thing to do because I've always wanted one and this thing's BADASS!!

    87 Turbo T hardtop, 81k original miles, Maroon w/redone Maroon interior, rare digital cluster, power windows, power locks

    Exterior Modifications:
    -High Quality Repaint (done years back but still looks good, whole front end was removed to paint, pass fender needs to be aligned a bit, door rubs slightly)
    -Shaved Emblems
    -Lowered
    -Fiberglass Front Bumper
    -Paint-to-match Bumpers
    -17" ROH Wheels (powdercoated black)
    -Smoked Parking Light Covers
    -20% Tint All Around
    -Black Trim
    -Repainted Satin Headlight/Taillight Bezels
    -Repainted Grill
    -Full Stainless Headlight/Tail Light Hardware, no rusted screws
    -Turbo 6 Logo Center Caps
    -BFG KDW Tires (7k miles)

    Interior Modifications:
    -Single A Pillar Gauge Pod
    -Dual Console Gauge Pod
    -Billet Console Panels
    -Billet Shift Knob
    -Billet Buick Racing Dash Panel
    -Carpeted Turbo 6 Logo Trunk Panels

    Under Hood:
    -TA Performance Black Billet Valve Covers
    -Metco Dual Valve Cover Breather Filters w/Billet Necks

    Performance:
    -Forged Stock Displacement Bottom End
    -Ported Stock Heads
    -Copper Head Gaskets
    -TE44 Turbo
    -42.5 Injectors
    -Sheet Metal Intake
    -4" CAI Setup
    -Center Mount Lower Scoop
    -Tial Wastegate
    -218/221 Cam
    -Turbo Tweak Chip
    -Razors Alky Injection (in-car adjustment)
    -ATR Stainless 4" Down Pipe
    -ATR 3" Single Shot Cat-Back Exhaust
    -Random Tech 3" Cat
    -Manual Boost Controller (currently set to 25psi)

    Suspension/Chassis:
    -100% Rebuilt Front End (pitman arm/idler arm/center link/tie rod ends)
    -Flaming River Quick Ratio Steering Box
    -Howe Low Friction Ball Joints
    -QA1 Adjustable Front Coilovers w/500lb Springs
    -Hotchkis Rear Springs
    -ATR Adjustable Tubular Front Upper/Lower A-arms
    -Pole Position Upper Rear Control Arms
    -Spohn Tubular Lower Rear Control Arms
    -Energy Suspension Poly Body Mounts
    -Kirban Front Frame Braces
    -Drilled/Slotted Front Rotors
    -Lightweight Aluminum Calipers
    -Stainless brake Lines
    -Hawk Brake Pads (very agressive, some squeel associated with these, my plan was to change them if it bothered me)

    Drivetrain:
    -9" 3200 Stall Converter
    -3" Carbonfiber Driveshaft ($1000 by itself)
    -Stock 10 Bolt w/3:42's

    Electronics:
    -Scanmaster
    -Brand New ECU
    -New Powermaster 200amp Alternator
    -Headlight Brightening Kit
    -Caspers Electronics Engine Wiring Harness (professionally installed February)
    -All Wiring Redone
    -Autometer Boost Gauge
    -Autometer Oil Pressure Gauge
    -Autometer Water Temp Gauge
    -Sony X-plod Flip Out CD Player
    -2 10" JL Audio Subs
    -Optima Yellow Top Battery

    So again, negatives: Trans slips 2-3 shift, not horrible but it does. I'm sure it'll last quite a while like this but as I said I have ZERO money right now. Passenger door rubs the fender a bit, just needs the fender re-aligned, 6"x3" spot of paint missing on hood, and blower motor is shot. Not terrible things really, most are dirt cheap to fix. I'm just trying to be upfront about it.

    Will include both a front mount intercooler, and set of stainless headers, both BRAND NEW, never on a car. No, I won't sell them seperate. If I don't sell the car then they'll get installed on it.

    Paint is nice, body is straight, body & frame are solid, few surface rust spots on the undercarriage but for a G-body she's more solid than 85% of NE cars.

    I'm not 100$ dead set on selling her, because I love the car, but right now this is my ONLY car and I have no funds to do anything. It's obvious I'm going to take a hit on the car but I'm hoping for $12k, if not I'll keep it and do what I have to. The car's been built with no expense spared, add some tlc and you'll have the baddest ass T EVER!!!





    The motor pic is from February when the harness was done, since then it's had a new TIAL wastegate installed, new intake setup, and a few other odds/ends.

  2. #2
    COTM July '09
    Join Date
    Jun 2008
    Location
    Annapolis, MD
    Posts
    1,111
    iTrader
    1 (100%)

    BLK/BLK w/CGM Stripes
    2010 Camaro 2SS/M6

    Nice car, I wouldn't mind one of them myself ... I just cant get myself to sell my T/A though ... lol

  3. #3
    Disciple of Speed ShadowHawk's Avatar
    Join Date
    Oct 2005
    Location
    Central NJ
    Posts
    204
    iTrader
    2 (100%)

    Black
    LS6 Swapped WS6

    Snapped a couple quick pics, please forgive the dirt on the floor mats. As I said it's my daily right now and I only stopped home to take a few quick shots so it's not very clean. If you look in the 1 interior shot you'll see the 1 and only rust spot on the car, in the door jamb below the a-pillar. It's only on the driver's side. Other than that everything's perfect. Doors are solid, trunk is, frame is, body is.

    And is IS official, it's for sale. $12k as it sits with everything or I can negotiate from there without the spare headers/intercooler, and with stock driveshaft. Parts in it are definately worth more than I'm asking. And fyi, the internals consist of JE pistons, eagle rods, and scat crank.









  4. #4
    Junior Member
    Join Date
    Jul 2009
    Location
    west virginia
    Posts
    7
    iTrader
    0
    You interested in any trades? Have a 2007 Suzuki Hayabusa that is custom. Brand new paint (blacked-out), 10" over swingarm, chromed out, custom made chrome rims (one of a kind), full yoshi exhaust, hotbodies undertail, new ZVX 150 link black racing chain, adjustable lowering links, new pirelli dual compound tires, re-geared, new brakes, stainless brake lines, dark tint db windscreen, tons more that can't think of off top of my head. Over $15k invested. Also I have a 1994 20' Sea ray cuddy cabin boat w/ trailer in mint condition w/ 5.0 i/o motor, tons of extras that books for over $10k that I could throw some boot with. I need to get rid of one. Not enough time to use both.
    Last edited by o0o_o0_lee_0o_o0o; 07-28-2009 at 02:32 PM. Reason: add

  5. #5
    Disciple of Speed ShadowHawk's Avatar
    Join Date
    Oct 2005
    Location
    Central NJ
    Posts
    204
    iTrader
    2 (100%)

    Black
    LS6 Swapped WS6

    Quote Originally Posted by o0o_o0_lee_0o_o0o View Post
    You interested in any trades? Have a 2007 Suzuki Hayabusa that is custom. Brand new paint (blacked-out), 10" over swingarm, chromed out, custom made chrome rims (one of a kind), full yoshi exhaust, hotbodies undertail, new ZVX 150 link black racing chain, adjustable lowering links, new pirelli dual compound tires, re-geared, new brakes, stainless brake lines, dark tint db windscreen, tons more that can't think of off top of my head. Over $15k invested. Also I have a 1994 20' Sea ray cuddy cabin boat w/ trailer in mint condition w/ 5.0 i/o motor, tons of extras that books for over $10k that I could throw some boot with. I need to get rid of one. Not enough time to use both.
    Only interested in trades for cars. If you can sell either one let me know.

  6. #6
    Disciple of Speed ShadowHawk's Avatar
    Join Date
    Oct 2005
    Location
    Central NJ
    Posts
    204
    iTrader
    2 (100%)

    Black
    LS6 Swapped WS6

    bump

  7. #7
    Member Maro SS's Avatar
    Join Date
    Mar 2009
    Location
    Oldbridge
    Age
    28
    Posts
    303
    iTrader
    0

    Black
    2001 Camaro SS

    Bump! Sweet ride.. Prob one of my top 10 fav cars
    2001 Camaro SS M6 SLP LMII, Lid
    1987 iroc-z RIP 5.7 TPI Full exhaust, lingenfelter intake runners (gone but not forgotten)
    1991 bmw 325i DD

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Dodge Stealth RT Twin Turbo 5 speed FOR SALE OR TRADE
    By bossmancb in forum Vehicles For Sale / Trade
    Replies: 11
    Last Post: 06-09-2013, 10:56 AM
  2. 2000 Trans am 6 speed for sale/trade
    By Brad5150 in forum Vehicles For Sale / Trade
    Replies: 21
    Last Post: 11-20-2007, 07:47 PM
  3. 1994 25th ann. trans am 75k miles 6 speed for sale or trade
    By firehawk95 in forum Vehicles For Sale / Trade
    Replies: 1
    Last Post: 11-30-2006, 12:23 AM
  4. 02 RSX type S m6 for sale or trade, AL
    By bamawake in forum Vehicles For Sale / Trade
    Replies: 0
    Last Post: 09-07-2006, 01:41 PM
  5. 1986 t type trade for ls1 f body
    By pwrdbypsi in forum Vehicles For Sale / Trade
    Replies: 2
    Last Post: 01-18-2006, 02:04 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •