wat do u guys think???? hp/trq?

**ggino85** · 08-15-2009, 02:05 PM

i posted this in the general area too but i figured i might get more responses here in the LT1 section

i have a 95' lt1 camaro and im getting it dyno tuned in a couple days and i was just curious to see how much horse power and torque you guys think she'll put down.
Cars an A4, lt1 bored .030 over
Heads are ported to 2.02 intake 1.64 exhaust
Cam is comp cam: 276/290, 220/230@.050 lift 510/510 lsa114 rpm 1500-5000.
Moroso cai, and thats all i can think of wright now....... i will b getting longtubes/full exhaust in the near future. just wondering wat you think she'll put down as of now...... thanks for your input

**5.0THIS** · 08-15-2009, 08:08 PM

You did a cam and ported heads with stock exhaust manifolds and exhaust? Tuned through an auto then... 320-330rwhp maybe.

**ggino85** · 08-15-2009, 09:18 PM

It has the stock manifolds with flowmaster catback, im gonna get longtubes when i can afford it..... but really only 320-330??? i was hoping for a little more than that........

**JaycenK** · 08-16-2009, 06:06 AM

It can't breath.

**JwMonE99** · 08-16-2009, 06:25 AM

You should of the headers first, its really choking the motor. One you get the headers it would allow for much more power.

**ggino85** · 08-16-2009, 03:55 PM

thanks guys for your responses, i was kinda thinking the samething about the headers but i just got a new cat to help the car "pass

" smog so i was trying to get by with that for awhile but you guys say the manifolds are chocking the engine that bad, then guess i better start saving for headers! so with headers and my current mods how much do you think she'll put down

?

**LT1 > LS1** · 08-16-2009, 04:18 PM

my buddies is layin down 370whp with mild heads cam, and supporting boltons. seriously, headers were worth 40 RWHP on my otherwise STOCK LT1. imagine how much you'll gain if you have the internal mods too. 40+ easily

**5.0THIS** · 08-16-2009, 04:57 PM

Could be 350-375rwhp with the headers.

**ggino85** · 08-16-2009, 05:09 PM

Originally Posted by 5.0THIS

Could be 350-375rwhp with the headers.

i would be REALLY!!!!!! happy with 375rwhp, that would be awesome. i want it to be faster than my previous ls1's and i want it to be able to beat mild bolton LS1's and most other competitors on the street. (and of course eventually some track)

**JaycenK** · 08-17-2009, 08:42 PM

Get your self a set if mid's that will bolt up to the cats if funds are low or save up and do a Mac mid and catted Y or go all out and do Long Tubes and put some high flow cats on a Y. Might be a pain in the arss out there in CA though.