Venom Injectors

**Red97LT1** · 02-16-2007, 06:19 PM

anyone have any experience with them. I have one bad injector and was thinking about replacing them all. I see a set of 8 for 220.00.

**SSmoky01** · 02-16-2007, 06:30 PM

I have not had any experience with em, but I have not ever heard anyting bad about em either.

**Red97LT1** · 02-16-2007, 07:06 PM

Yeah,me neither. it would cost me 80 bucks for one,so 8 for 220.00 sounded like a good deal. I have also been told to get some from Racetronix which has Delphi and Lucas?

**5.0THIS** · 02-17-2007, 03:03 AM

I would recommend factory replacements, wherever you get them from. And stay with the stock size injector, unless you have big plans in the immediate future.

**Red97LT1** · 02-17-2007, 08:00 AM

Yeah,I was sticking with the stock injector size (24#,correct?). I just can't figure out as to why the parts store wants 80 bucks for one,and I can find them online cheaper.
http://www.racetronix.com/621048.html Are they remanufactured?

**SexOnWheels** · 02-17-2007, 08:08 AM

If you are going with a stock injector just but a used set.

There are always full sets for sale when someone upgrades.

Grandkodiak (PM him) just got a new engine put in his car he probably has a stock set for sale.

**Red97LT1** · 02-17-2007, 08:13 AM

Ebay has alot of remanufactured ones. A set of 8 for 150.00. Claim they are cleaned flow tested etc.

**Chad97z** · 02-17-2007, 10:25 PM

Originally Posted by 5.0THIS

I would recommend factory replacements, wherever you get them from. And stay with the stock size injector, unless you have big plans in the immediate future.

agreed. You don't need more fuel. If you change the flow rate your just going to complicate your problems. PLus, injectors dont go bad often. So, just replace the one bad one. And I think the factory LT1 is 19# PLus if you put a 25# injector on it, doesnt that mean you need 25 pounds on it to operate properly? If so, and you dont up the pressure, then you may not get a good spray. Why do people jack with a good thing?

**Red97LT1** · 02-18-2007, 08:39 AM

Originally Posted by Chad97z

agreed. You don't need more fuel. If you change the flow rate your just going to complicate your problems. PLus, injectors dont go bad often. So, just replace the one bad one. And I think the factory LT1 is 19# PLus if you put a 25# injector on it, doesnt that mean you need 25 pounds on it to operate properly? If so, and you dont up the pressure, then you may not get a good spray. Why do people jack with a good thing?

Ok. I 'm just going to replace the bad #7 injector. I called the local parts store and they don't even know what lbs the stock injectors are!!!

I have bben told there 24#.