tip for people wanting a line lock

[jasonisdn]

if you want a line lock on your car. make sure you go buy your own flaring tool. i got my setup yesterday and broke the wing nut that holds the 2 clamps together with my bare hands (i am strong but not incredible hulk strong lol) also make sure its a tool that won't need a vise to hold it tight enough. becasue you will have to bend the line that feeds the rear brakes , while its on the car. unless you want to triple your work load by trying to get it off. hopefully today i can find 2 good steel wing nuts and a strong c clamp and get this part finished. still have to wire up the versa fuler and the mallory 685. I did find a set of draglites with mt et's for 250.00 (rear only).

[jasonisdn]

update
the line that feeds the rear brakes on a 3 channel brake (96 with no traction control for me) setup is not 1/4 inch line, it is 6mm. i had to go to autozone and rent a metric flaring tool for 25.00 and finish it. by the way you get that 25 bucks back when you return the tool, better than having to buy another one.