Results 1 to 6 of 6

My car will start but it will not run (help)

This is a discussion on My car will start but it will not run (help) within the LT1 forums, part of the Vehicle Specific category; I have a 1995 Trans am with a freshly rebuilt 355 LT1. I need some help I just finish rebuilding ...

  1. #1
    Junior Member
    Join Date
    Apr 2007
    Location
    AUSTIN
    Posts
    33

    GREEN
    1994 FIREHAWK

    My car will start but it will not run (help)

    I have a 1995 Trans am with a freshly rebuilt 355 LT1. I need some help
    I just finish rebuilding this motor and tranny on this car and it the engine was running just fine with out any issues.

    The engine did come on and it run for 3 days, but now it only starts but it wil not engage.

    It shows fuel pressure and it show to have spark at the plugs.
    It sounds like it wants to fire but when you let the key go it stops.

    Any suggestions???? need to all the help that I can get from all your experts on LT1.

    Thank you.

  2. #2
    Member jasonisdn's Avatar
    Join Date
    Aug 2005
    Location
    nc
    Age
    42
    Posts
    294

    red
    96 ss

    sounds like a spark issue. check for burnt or damaged wires. pull the plugs and see if they look fuel fouled. that would show a spark issue. also try spraying some starter fluid while cranking it. if it runs , you know its a fuel issue.

  3. #3
    Member Chad97z's Avatar
    Join Date
    Aug 2005
    Location
    Dallas / Irving
    Posts
    396
    hmm this is odd. My cars runs but it doesn't start. =)

  4. #4
    Member jasonisdn's Avatar
    Join Date
    Aug 2005
    Location
    nc
    Age
    42
    Posts
    294

    red
    96 ss

    try the same things i listed then post back.

  5. #5
    Member Chad97z's Avatar
    Join Date
    Aug 2005
    Location
    Dallas / Irving
    Posts
    396
    right

  6. #6
    Junior Member
    Join Date
    Apr 2007
    Location
    AUSTIN
    Posts
    33

    GREEN
    1994 FIREHAWK

    Thank you.

    Thank you............is all fix........it was the distrubutor it was not getting the right voltage out.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Help: 97 TA won't start
    By ADAM-00SS in forum LT1
    Replies: 7
    Last Post: 07-08-2010, 04:13 PM
  2. Z28 won't start
    By flaggs_ls1 in forum General Help
    Replies: 4
    Last Post: 05-11-2008, 09:46 PM
  3. where to start?
    By Jane_says in forum Firebird / WS6
    Replies: 47
    Last Post: 02-25-2007, 09:14 PM
  4. Cold Start/Warm Start Problem
    By I'mLS1John in forum General Help
    Replies: 11
    Last Post: 02-23-2007, 08:11 PM
  5. Cold Start/Warm Start Problem
    By I'mLS1John in forum New Member Introductions
    Replies: 0
    Last Post: 02-22-2007, 06:26 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •