I need 96/97 crankshaft hub.GM national back order

[always faster]

First ovall i know that im not in the "WANTED" forum and im sorry to use the "LT1 TECH" one but im kinda really stuck right now

I ve bought a brand new LT4 crate engine from GM(the last one before they discontinued it last month) i also bought every small sensor,bolts,brackets,pulley,etc.

But i cant install it,im putting this motor in my 95 bird and the stock 95 crank hub wont align correctly with the other pulley since its too long for a 96/97 ltyx base setup,it measure 3.516".

The 96/97 ltx base used a crank sensor with a reluctor ring that is squeeze between the crank gear and the crank hub.The crank hub was slightly shorter(3.417") to let some space for the reluctor ring.

I called gm and they told me that the hub was on national back order dor the past 4 month and no release date was available

I cant seems to find one and now after 20k spent on the car i cannot complete the the install and finally take a ride

So if you got a crank hub from a 96/97 ltx base could you just send me a pm.If you dont know if the one you got is a 93/95 one or a 96/97 one here are the length measure:

-93/95 crank hub lenght: 3.516"

-96/97 crank hub lenght: 3.417"

I need the 3.417" one.

Im begging for help please

Again sorry to use the tech forum.

Thank you

[always faster]

Thanks for all your help,with my multiple thread on each f-body forum i finally found one

Thank you