Results 1 to 3 of 3

Cleaning LT1 Injectors

This is a discussion on Cleaning LT1 Injectors within the LT1 forums, part of the Vehicle Specific category; My LT1 has been in storage for a few years and I would like to know what would be the ...

  1. #1
    Junior Member
    Join Date
    Dec 2005
    Philadelphia, PA
    70 El Camino

    Cleaning LT1 Injectors

    My LT1 has been in storage for a few years and I would like to know what would be the best way to clean the injectors before I fire it up, i.e ultrasonic, etc.

    Does anyone offer this service? Or would it be cheaper to buy new injectors instead? If so, what brand and size should I get for a stock LT1 with headers?



  2. #2
    Super Moderator 5.0THIS's Avatar
    Join Date
    Oct 2001

    95 Z28

    There are places that will clean and flow your injectors.. I would search around for one of those places.

  3. #3
    Member Chad97z's Avatar
    Join Date
    Aug 2005
    Dallas / Irving
    Might try buying a fuel injector cleaner kit but you might need and air compressor to apply pressure to your kit so it will pressurize the fuel rails. NOt sure how the system gets pressure, but I know that you pull the fuse on the fuel pump and allow the cleaner solution to flow str8 into the fuel rails. Not necessary to remove the fuel injectors. Other than that, autozone has some really good cleaners that go in your tank, but I always mix it like 10 times stronger than the recommendation. I figure if you can add the professional hard cleaners str8 into the fuel rail then its safe to add more than the recommendation into the fuel tank.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts