Results 1 to 4 of 4
Thread: ? about heads?
-
04-18-2007, 05:00 PM #1
- Join Date
- Apr 2007
- Location
- Ga
- Posts
- 3
? about heads?
2.02 and 1.60 valves in them 58cc what power would these heads make on a stock bottom end 95 lt1. they flowed 280@600 the guy says the should make about 10:1 compression. any ideas what hp I would have with these stock bottom end just long tube headers. Thanks
-
04-18-2007, 05:05 PM #2
What about a cam? Huge heads are pretty much worthless with a stock cam. And while you have the heads and the valvetrain off, you might as well pop in a new, bigger, cam.
-
04-18-2007, 05:20 PM #3
- Join Date
- Apr 2007
- Location
- Ga
- Posts
- 3
cam
what size cam not to thumpity but streetable
-
04-19-2007, 12:46 PM #4
thumpity huh. ok the best thing you can do is call a cam company. tell them the flow numbers on the head and all the specs on your car. (weight, stick or auto, purpose of build ex. auto cross or drag ,emissions required or not, nitrous in the future or not and any weight taken out of the car or stock weight) they will ask for more info than that.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Late-Model GTO Heads and Cam - The Voice Inside Our Heads, P
By Ed Blown Vert in forum GTOReplies: 0Last Post: 03-16-2011, 09:30 AM -
Late-Model GTO Heads and Cam - The Voice Inside Our Heads
By Ed Blown Vert in forum GTOReplies: 0Last Post: 02-04-2011, 02:00 PM -
AFR heads VS. Ported and beefed up stock heads.
By hutcher04 in forum Internal EngineReplies: 10Last Post: 03-14-2010, 08:27 AM -
New Heads or Port/Polish Stock Heads?
By Black02LS1 in forum Internal EngineReplies: 32Last Post: 06-22-2007, 11:29 PM
Bookmarks