Results 1 to 8 of 8
  1. #1
    Preferred Member CWW17's Avatar
    Join Date
    Apr 2006
    Location
    Central Illinois
    Age
    37
    Posts
    356

    Black | Black
    '07 Z06 | '98 WS6

    What the F*** did I do??

    I took off my lid, maf, bellow, and throttle body because I am going to send it in to be ported... Today, I want to drive my car... So I put everything back on and start the car and it starts up, then stalls, struggles for a bit to run, then dies... I checked all the connections and I hooked everything back up...? What did I do?

  2. #2
    someday joejenkinsglass's Avatar
    Join Date
    Oct 2006
    Location
    Iowa
    Age
    47
    Posts
    1,120

    green
    98 formula

    check the maf i have heard they are very sensitive

  3. #3
    Junior Member
    Join Date
    Oct 2006
    Location
    Robertsdale,Alabama
    Age
    40
    Posts
    38

    Black
    99' WS6 Trans-Am

    Unhook your battery and let it relearn...Everything should be fine after that..

  4. #4
    someday joejenkinsglass's Avatar
    Join Date
    Oct 2006
    Location
    Iowa
    Age
    47
    Posts
    1,120

    green
    98 formula

    Quote Originally Posted by Follet30 View Post
    Unhook your battery and let it relearn...Everything should be fine after that..
    i assumed he did that when he pulled it apart

  5. #5
    Preferred Member CWW17's Avatar
    Join Date
    Apr 2006
    Location
    Central Illinois
    Age
    37
    Posts
    356

    Black | Black
    '07 Z06 | '98 WS6

    I believe I have a hole in my EGR tube... Can I just buy the block off plates and rid myself of the system all together? I know it will set of the SES but AutoZone clears them for free... However, after cleared will it come back every time i start my car or will it just be gone?

  6. #6
    Senior Member
    Join Date
    Jul 2005
    Location
    Jacksonville, FL
    Posts
    2,723
    Going back and forth here. Where's the leak - in the tube or is the intake cracked or something? You can buy a block off plate for the exhaust connection and intake if you decide to delete the AIR system. Auto Zone can clear codes, but deleting the AIR it will keep it coming back unless it's turned off permanently with tuning.

  7. #7
    Preferred Member CWW17's Avatar
    Join Date
    Apr 2006
    Location
    Central Illinois
    Age
    37
    Posts
    356

    Black | Black
    '07 Z06 | '98 WS6

    its where the tube meets the metal connector that is bolted to the intake... So will I have to take it somewhere to permanently delete the code?

  8. #8
    someday joejenkinsglass's Avatar
    Join Date
    Oct 2006
    Location
    Iowa
    Age
    47
    Posts
    1,120

    green
    98 formula

    yes you have to have it turned off

    Quote Originally Posted by cww17 View Post
    its where the tube meets the metal connector that is bolted to the intake... So will I have to take it somewhere to permanently delete the code?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •