Results 1 to 20 of 22
Thread: SLP lid
-
02-19-2010, 02:12 PM #1
SLP lid
Does anyone know a link on how to install a SLP lid with pictures.
-
02-19-2010, 02:22 PM #2
It should come with instructions, what are you having issues on?
-
02-19-2010, 02:30 PM #3
im having trouble because im simply replacing my old lid because it is cracked. My new SLP lid has two hole in it im just trying to figure out how to do it before i replace it.
-
02-19-2010, 02:34 PM #4
Yea it should of came with a plug that goes in the big whole then the little is for that sensor which also comes with a grommet if i can remember right
-
02-19-2010, 02:35 PM #5
Wait im sorry i think yours is different than mine does yours have a EGR on it?
-
02-19-2010, 02:39 PM #6
- Join Date
- Feb 2007
- Location
- San Diego, CA
- Posts
- 5,823
2002 Z28 A4 NBM- Sadly now demodded :(
2000 has EGR...
You can also get rid of the Heimholz resonators if you want.
Did you get a smooth bellows?
-
02-19-2010, 02:41 PM #7
- Join Date
- Feb 2007
- Location
- San Diego, CA
- Posts
- 5,823
2002 Z28 A4 NBM- Sadly now demodded :(
You might want to modify the base and cut out the plastic piece between the base and the core support. This allows for more airflow.
Sorry I don't have any pix.
-
02-19-2010, 02:50 PM #8
http://www.google.com/search?hl=en&r...lp+lid&spell=1
Go to the second link down
-
02-19-2010, 03:07 PM #9
- Join Date
- Feb 2007
- Location
- San Diego, CA
- Posts
- 5,823
2002 Z28 A4 NBM- Sadly now demodded :(
^ Very good!
I did my MTI lid at my friends shop. Although I did the mods myself he showed me what and where to cut.
-
02-19-2010, 03:27 PM #10
i do have all i need but is it suppose to come with something for i can connect the sensor with. i want to start it, but im a little worried i might do it wrong.
-
02-19-2010, 03:35 PM #11
The air lid i have now does not have the big hole im just not sure what to connect the tube with
-
02-19-2010, 04:24 PM #12
i just found out the air lid im replacing is the whisper lid, if that makes a different because it does not have the larger hole.
-
02-19-2010, 06:41 PM #13
Maybe you're replacing a 1998-2000 lid that does not have the AIR hole, with a 2001-2002 airlid that does have the hole & the AIR tubing kit.
There's a difference in them, ..., the AIR port/tubing, ...
1998-2000
http://www.slponline.com/view_produc...44&BIG=21044-1
2001-2002
http://www.slponline.com/view_produc...45&BIG=21045-1
Which one do you have?
You need the 21044 (1998-2000 without the AIR port/tubing.)
-
02-19-2010, 06:52 PM #14
I bought the one with the air port tubing because when i bought it it says 2000-2002 since my car is 2000 i thought it would work. the 21044 actually says 1998-1999.
-
02-19-2010, 11:58 PM #15
I looked at my airlid and i have a filter that plugs into the end of the hose to the right of the air lid it K&N par 62-1030. Can i just unplug the little filter and plug it into the air tubing kit.
-
02-20-2010, 08:47 AM #16
-
02-20-2010, 09:41 AM #17
I have read using a hair dryer works is that true or am i confusing it with something else
-
02-20-2010, 01:01 PM #18
Yea thats what i ended up doing
-
02-20-2010, 04:21 PM #19
Well i put everything together and the lid doesnt stay on snug for long. I have notice that mine has a plastic between the MAF and my lid. I have seen pics online and some cars do not. Does anyone know what im talking about?
-
02-20-2010, 04:35 PM #20
i think the plastic between the lid and the MAF is a smooth bellow, i looked it up and i think thats what its called, but i am not sure because im new at this. Can anyone please help me.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks