Results 1 to 2 of 2
Thread: radiator
-
05-07-2012, 07:09 PM #1
- Join Date
- Apr 2007
- Location
- tx
- Posts
- 129
black- 02 trans am ws6
radiator
i have an 02 trans am ws6 the power steering cooler went out so i took it off and replaced it with its own cooler and ran a radiator hose from a trans am the pormblem is that it keeks leaking from the upper neck is the radiator different on ws6 from trans am this is my 2nd hose
-
05-12-2012, 05:55 PM #2
It should be the same. I removed our P/S cooler, even though it was not leaking, and replaced the upper hose assembly with a GM hose for a "2002 Camaro". If it is the hose, and not a cracked radiator, you can dry everything off and carefully run a bead of RTV around the neck (not the inside of the hose, as it may then enter your cooling system). After installing the clamp, let it set for an hour or two so the RTV can cure a bit before refilling the system with coolant. On older cars that have pitted aluminum water necks I have done this several times without any issue and haven't had one of them leak yet.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Help: Boiling sound at radiator, radiator cap blowin off
By lanprat in forum External EngineReplies: 7Last Post: 08-05-2012, 04:29 PM -
Griffin radiator install, stand up radiator install
By 02Sweet in forum External EngineReplies: 12Last Post: 06-03-2012, 05:00 PM -
Help: so the radiator...
By Ws6islife in forum External EngineReplies: 2Last Post: 05-25-2011, 09:54 AM -
'01 Z28 Radiator
By David Ray in forum General HelpReplies: 3Last Post: 07-12-2009, 01:31 AM -
Project Shark Attack C3 Corvette Radiator Install - Radiator Fallout
By Ed Blown Vert in forum CorvetteReplies: 0Last Post: 04-03-2007, 09:20 AM
Bookmarks