This is a discussion on No HighBeams within the Firebird / WS6 forums, part of the Vehicle Specific category; I have replaced both highbeams but still nothing. I have taken the connectors apart and found all kind of corrosion. ...
06-03-2010, 10:49 AM #1
I have replaced both highbeams but still nothing. I have taken the connectors apart and found all kind of corrosion. I cleaned them up as good as I could and put them back together. I bought the car from someone in Maine, so, most likely road salts are responsible for that, but if my low beams are working, the motor is working, and these are all fed through the same connector, why doesn't my highbeams work? Any ideas? Thanks.
06-03-2010, 05:40 PM #2
Did u check for power at the headlight connector? maybe fuse? Does the high beam indicator light come on when you switch to high beams?
06-03-2010, 05:49 PM #3
No, WS6 the high beam indicator lamp on the dash does not come on. Seems like if it was a fuse, none of the headlights would work. I may be wrong. I have looked at my owners manual looking for high beam fuse or relay but don't see one. I will check the high beam pigtail to see if there is power. Thanks!
06-03-2010, 05:55 PM #4
- Join Date
- Jan 2009
- Paterson/Ridgewood, NJ
Phantom Black Metallic
- 2004 GTO M6
My vote is the dimmer switch. I can't recall if the switch is mounted on the steering column tho.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By emoFTW in forum Camaro / SSReplies: 9Last Post: 09-27-2008, 01:25 PM