Need help with headlight (not the motor lol)

**DTFHC77** · 11-10-2009, 11:42 AM

So here's the story basically i was picking my sister up from school, was making a right turn and i didntt see this old Taurus whiz by and ultimately i hit em, as I step outta the car to see the damage done, im amazed that the only thing that's really messed up is my headlight. Went to the dealer today to see what parts I need, and it turns out they don't sell the headlight parts seperatley and wanted to charge 650, and i don't even need the whole thing . BTW i took the headlight cover plate and the bezel w/one headlight left in it.I think the only parts i need is the plastic behind the bezel that keeps the lights intact but im not 100% sure .Well I have the pics posted below if any y'all can help me out on what parts i need that would be great. If you need me to take any extra pics that's cool.

The panel is needs to aligned a bit

Here are some pics of the bezel

**DTFHC77** · 11-10-2009, 11:43 AM

one more

**Kaotic_ws6** · 11-10-2009, 06:10 PM

southlake... hmm i used to cruise around there all the time. id peice it back together with duck tape and super glue before id let the stealership screw me outta 650 bucks

just look around online man for what you need. google is your friend and also check junkyards... theres a crap ton on carson street off of 121.

**DTFHC77** · 11-10-2009, 06:15 PM

yeah i defenitley don't wanna buy from the stealership lol, but im gonna check ebay, craigslist, the junkyard is a great idea but i just gotta know the exact part i need.

**Kaotic_ws6** · 11-10-2009, 06:23 PM

Originally Posted by DTFHC77

yeah i defenitley don't wanna buy from the stealership lol, but im gonna check ebay, craigslist, the junkyard is a great idea but i just gotta know the exact part i need.

i checked the pics again, looks like all you need is the plastic peice thats broke... i dont see any other problems

**DTFHC77** · 11-10-2009, 06:31 PM

thanks man will do ill check out that junkyard tmmrw

**Kaotic_ws6** · 11-10-2009, 07:00 PM

Originally Posted by DTFHC77

thanks man will do ill check out that junkyard tmmrw

do you know where im talk about? do you know where speedtek performance is?

**DTFHC77** · 11-10-2009, 07:17 PM

You know what bro i think ive mightve been there before, its near arlington where all of those old part shops are right? speedtek along w/ other performance shops are near there, cuz i know haltom city is close to arlington

**Kaotic_ws6** · 11-10-2009, 07:20 PM

Originally Posted by DTFHC77

You know what bro i think ive mightve been there before, its near arlington where all of those old part shops are right? speedtek along w/ other performance shops are near there, cuz i know haltom city is close to arlington

yea its around that i believe all those junkyards are down the road behing speedtek. almost positive

**TempleU_WS6** · 11-11-2009, 09:46 AM

if you dont find anything at the junk yard you can usually find entire headlight assemblies on ebay that are reasonably priced.

**DTFHC77** · 11-11-2009, 02:01 PM

Which assembly kit? (brand.etc)

**TempleU_WS6** · 11-11-2009, 09:43 PM

Originally Posted by DTFHC77

Which assembly kit? (brand.etc)

An OEM assembly.

**drtwrk1** · 11-12-2009, 07:11 PM

I saw 2 complete assys on ebay yesterday..... Good luck.

**DTFHC77** · 11-12-2009, 07:17 PM

haha so did i, and im keepin a close eye on them

**herculesrider1** · 11-13-2009, 09:03 AM

I think you will need the entire assembly. The bolt in the upper left corner of the picture has got to be taken off along with the other one that you can't see in this picture. The entire assembly that houses the lights and also the connector arm that goes down to the actuator motor is included in this assembly. Unplug both low and high beam lights, take the two bolts off and disconnect the connector arm from the headlight actuator motor and it should all come out fairly easily......