Results 1 to 16 of 16
Thread: Mods for a TA?
-
12-14-2006, 12:18 PM #1
Mods for a TA?
Hey, I know this is probably already posted somewhere, Im just too lazy to look that hard.. Im looking for some quick ez mods with maximum results.
I already have the following
Corsa Exhaust
Throttle body Bypass
Crane Ams Power Progammer
SLP Air Lid + K&N Air Filter
What else can I do for some quick HP?
Also..My second question, with all of these mods on my WS6, what would be my estimated HP? My town is too poor to have a dyno, ha ha
Thanks
-
12-14-2006, 12:35 PM #2
- Join Date
- Nov 2006
- Location
- Missouri
- Age
- 38
- Posts
- 205
Pewter Metallic (1of?)- 2001 Formula M6(1 of 225)
Get an aftermarket y-pipe for stock manifolds, that Throttle Bypass doesn't really do much at all for you, what adjustments did you make with the power programmer, (laptop tuning is much better), My rough educated guess with what you have done so far, is probably a gain of 20-30 over stock at the motor, and about 15-18 at the wheels.
-
12-14-2006, 12:37 PM #3
I didnt really make many adjustments with the programmer, just the yes or no answers, I didnt change my spark or anythin because it said it can cause damage and I dont know a hell of a lot about cars.
-
12-14-2006, 01:13 PM #4
Last edited by 99WS6MAN; 12-14-2006 at 01:19 PM.
99 WS6 Trans AM
Hurst Shifter
Aftermarket Throttle Body
KN Air Filter
Strut Tower Brace
Z06 Rims
-
12-14-2006, 03:20 PM #5
- Join Date
- Dec 2002
- Location
- n/w chicago
- Age
- 54
- Posts
- 6,932
black- 2000 nhra edition formula
a aftermarkey y pipe minus headers is useless unless you want the car louder.
there are laptop programs called ls1edit and hp tuners for ls1 cars.
long tube headers and a off road pipe is a good 25-30 rwhp gain.2000 nhra edition formula
a few bolt ons, 379 rwhp
11.96 @113.25
-
12-17-2006, 06:38 PM #6
- Join Date
- Jul 2006
- Location
- indiana
- Age
- 41
- Posts
- 1,018
black, 05 Roush- black, 99 T/A WS.6
1999 T/A WS6 Black -------SOLD
05 mustang Roush sport;
DOB manifold, m122 SC, 47lb injectors, gt500 TB, roush TVS CAI, Detroit rocker SC grind camshafts, Mac LTs, off road x, roush off road mufflers, roush short throw shifter, kenne bell BAP, Brenspeed 93 octane tune. 479rwhp 436ftlbs SAE.
-
12-18-2006, 12:20 PM #7
Ok I dont know if anyone is understanding my question here, I am looking for someone to tell me some quick cheap and easy mods that will boost my horse power. Thanks
-
12-18-2006, 12:30 PM #8
theres a few things that are cheap for LS1s but not many. invest in a LS6 intake manifold, LTs with ORY, and a cam...easy HP but not so cheap. but as we all know, money buys speed.
-
12-26-2006, 09:13 PM #9
heres the link...
http://www.gmhightechperformance.com...modifications/Last edited by sobaka79; 12-26-2006 at 09:47 PM.
-
12-26-2006, 09:32 PM #10
1. cut EGR tube in upper intake
2. punch out your MAF screen
3. port and polish your TB, if you can borrow a dremel tool
4. remove the radiator shroud and cut the crap under your lid to let more air under the lid. (its the back half (engine side) of the plastic thing under your airfilter/lid
total cost $0.00
-
12-27-2006, 03:30 PM #11
Thank you Sobaka. That was EXACTLY what I was looking for. Your a god, Thanks Again!
-
12-28-2006, 08:11 AM #12
Check out this "diy" site for free mods.
http://www.installuniversity.com/ins...sity/index.htmIf it doesn't have a turbo or a V8, it doesn't belong on the road.
Hey guys look it came back from the shop! I still need a bigger wing though...
-
12-29-2006, 08:50 AM #13
a4/m6?
-
12-29-2006, 09:25 AM #14
- Join Date
- Jul 2005
- Location
- Earth
- Age
- 47
- Posts
- 3,365
414 RWHP 395 RWTQ- 00 Black Ram Air Trans Am
Dude explain what "cheap" is to you. How much $$$ do you have to spend, and that will make this topic a little bit easier to tackle. There are a ton of guys on here who can help, but you aren't giving us much now are you?
-
12-29-2006, 09:27 AM #15
-
01-02-2007, 11:49 AM #16
Don't forget about the good old "Fernco Mod" instead of the smooth air bellows you can go to Home Depot and get a fernco part for a toilet and use it between the TB and the MAF. I want to say I used the 3" to 4" one. Check around...trust me, it doesn't even look out of place...you just have to get over having a part for a toilet on your car.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
15 Cheap Mods - 15 No-Buck And Low-Buck Mods
By Ed Blown Vert in forum Firebird / WS6Replies: 0Last Post: 03-05-2012, 04:20 PM -
2004 Cobra w/mods Vs. R34 Skyline w/mods
By Packy in forum Kill StoriesReplies: 88Last Post: 08-31-2009, 06:26 PM -
Question: Mods
By repeter in forum GTOReplies: 1Last Post: 02-15-2009, 01:00 PM -
Question: doing mods
By cramn4903 in forum Camaro / SSReplies: 9Last Post: 02-09-2009, 05:18 PM -
$2000 on suspension mods or on motor mods??
By greatwhiteZ28 in forum Suspension and HandlingReplies: 6Last Post: 09-27-2007, 06:04 AM
Bookmarks