It's Alive!!!!

[SMWS6TA]

[ame]http://www.youtube.com/watch?v=bPmVhyHBRAM[/ame]





Finally it's alive!!!!!


It's been a rough 7 weeks. Last weekend I finally installed the master, slave, hydraulic clutch line (with drill mod), new bell housing from Quick Time. Then had to weld in a new O2 sensor bung because I stripped the old one out by accident. Clear the codes and now she's running real good!!!

All of this started because some shit bag from a shop that can't read put in ATF instead of Dot III in the clutch master while bleeding the clutch. I know, I know, never let another man touch your car, but this was a case of I needed it done and I didn't have the time or space to do it. Lesson learned again the hard and expensive way.


I'm just glad to have her back. Now that the clutch is fixed I plan on getting some vids. Will post this weekend if able due to weather.

[Camaro69Mac]

Finally it's alive!!!!!


It's been a rough 7 weeks. Last weekend I finally installed the master, slave, hydraulic clutch line (with drill mod), new bell housing from Quick Time. Then had to weld in a new O2 sensor bung because I stripped the old one out by accident. Clear the codes and now she's running real good!!!

All of this started because some shit bag from a shop that can't read put in ATF instead of Dot III in the clutch master while bleeding the clutch. I know, I know, never let another man touch your car, but this was a case of I needed it done and I didn't have the time or space to do it. Lesson learned again the hard and expensive way.


I'm just glad to have her back. Now that the clutch is fixed I plan on getting some vids. Will post this weekend if able due to weather.

So i have the same problem with the o2 Sensor bung. Is there a way to tap it?? i gotta get that bitch in there somehow. Because cutting out the old one and getting a new one welded in seems like a bitch

[Smittro]

So i have the same problem with the o2 Sensor bung. Is there a way to tap it?? i gotta get that bitch in there somehow. Because cutting out the old one and getting a new one welded in seems like a bitch

You could possibly try a helicoil..

[Cutlass]

So i have the same problem with the o2 Sensor bung. Is there a way to tap it?? i gotta get that bitch in there somehow. Because cutting out the old one and getting a new one welded in seems like a bitch

Look for this thread chaser tool. It has worked for me. O2 sensor thread is 18mm x 1.5 and some spark plugs are the same. so you could also look for a spark plug heli-coil kit.

[Camaro69Mac]

Look for this thread chaser tool. It has worked for me. O2 sensor thread is 18mm x 1.5 and some spark plugs are the same. so you could also look for a spark plug heli-coil kit.

where did you get that?

[SMWS6TA]

So i have the same problem with the o2 Sensor bung. Is there a way to tap it?? i gotta get that bitch in there somehow. Because cutting out the old one and getting a new one welded in seems like a bitch

Cost me $20 at the same muffler shop that did my SFC, Muffler and exhaust tips.

I'd call around.

[SMWS6TA]

Look for this thread chaser tool. It has worked for me. O2 sensor thread is 18mm x 1.5 and some spark plugs are the same. so you could also look for a spark plug heli-coil kit.

Thanks Cutlas, I'll look for one of those.

[Camaro69Mac]

Thanks Cutlas, I'll look for one of those.

Just went to napa and bought a tap 18 1.5 worked great 10 bucks. done!

[SMWS6TA]

Picking up this this week end. Something I think will be needed later on.