how to convert to leds??

[Ws6islife]

i have no turn signals at the moment, have tried replacing socket, bulbs, flashers..everythign and they still will not work. So the point of this thread is i need to find out how to convert all my lighting to LED's. front turn signals, rear turn signals, also for looks should i go ahead and convert my whole back side to leds? thanks for the help in advance

[Ws6islife]

Bump!

[bluehawk2000]

I would like to read about this to anybody have any info on this?

[RyanJM]

It's easy I have my front blisters and aide marker front and rear done with clear lenses and the drl delete. I plan to do the taillights if the buds burn out.1st order the bulbs from a eBay seller with good feedback it's cheaper and better selection than local stores here. Then take the dash panel off under the wheel near you nee's and swap the old out dated flasher module for a electronic one that can be bought at any local parts store for a couple dollars, stay away from resistors they get hot and cause issues. The electronic flasher module will last. I did it mostly to match all my hid's but have to admit the are cooler on and look much better.

[Ws6islife]

what would i search for each individual bulb on ebay? could i get them from autoillumination or superbrightleds? also what color would i get for the front i know they have to be amber, i guess i just have to look and match. one more question if i do the tail lights would i have to get a pure white bulb since the tail lights are already red?

[Ws6islife]

do i have to delete the drl?