the headlight assembly does not shut sll the way?

[5.7mmImportkilla]

My ws6 passenger side shuts close and tight not to much of a gap but on my driver-side when the headlight shut it leave a little gap, it looks ugly and its killing me... is there a adjustment somewhere?
thx

[justinmc978]

My ws6 passenger side shuts close and tight not to much of a gap but on my driver-side when the headlight shut it leave a little gap, it looks ugly and its killing me... is there a adjustment somewhere?
thx

yes, there are little 'bump-stop' screws that you can adjust, just look around for them

[silverWS6]

yes, there are little 'bump-stop' screws that you can adjust, just look around for them

Right along the edge of the headlight cover, flip up your lights and you should see them right away

[5.7mmImportkilla]

Thanks fellas ...
I had to remove that black plastic bezel that surrounds the headlights to access em ...
it looks nice thanks!

[justinmc978]

Thanks fellas ...
I had to remove that black plastic bezel that surrounds the headlights to access em ...
it looks nice thanks!

oh yeah forgot about that lol glad you worked it out

[janamarie]

Right along the edge of the headlight assembly cover, flip up your lights and you should see them right away

Thanks fellas ...
I had to remove that black plastic bezel that surrounds the headlights to access em ...
it looks nice thanks!

I have the same problem with my headlight, I'll try this two tips from you mates. Hopefully it will also work on mine. I will also gave an update.

[jrzdude]

Thank god I just found this. I have the exact same problem and drives me crazy. I didn't have a clue about these headlights. Thanks!

[Guerrillakilla13]

did you screw with the lights or did it just do that on its own? Cause i just screwed with my passanger one because it was making that terrible grind noise for 5 seconds when it came down, fixed the issue by turning the gear 180, than discovered that night that the light wouldn't pop up cause the hood was caught in it felt terrible

[jrzdude]

Ok, I cant find this adjustment. After watching from outside the car, the headlight does go down all the way, but it pops up just a little bit after it goes down. Could it be the gear needs adjusting?

[5.7mmImportkilla]

Ok, I cant find this adjustment. After watching from outside the car, the headlight does go down all the way, but it pops up just a little bit after it goes down. Could it be the gear needs adjusting?

If I remember theres 2 screws to adjust the lamp one goes left and right
up and down and And the another to shift the lamp left and right..
If I have time I will confirm with a pic..

[WS6S]

just make sure you dont over adjust as they will rub the paint off from closing & opening.you may have to sacrifice a little with a small gap.

[5.7mmImportkilla]

your looking at the adjust screws with the white colored head bolt..
those are the bolts to shift and adjust your lamp.