hard wire foglights

[gillahoon]

I want to hard wire my fog lights. when I had my 98 neon i used the power ant. swith to one of the wires on the fog light switch to turn them on with out the head lights being on, and stay on when the high beams were on. any one know how to do this.

[GULLETT17]

i would think it would just be changing your power source wire to your switch to an accessory or constant power (whatever you choose)

[gillahoon]

want to know if anyone did it what wire i need to run and to were i know its just makin a wire hot but what one

[GULLETT17]

take the switch out and test it with a test light. . .one hot will prob be illumination of the switch, one will be the hot you need.

[SVG210]

I wired my High beams and Foglights due to a short. but I used direct power from the battery, two relays, and power from the IGN to the switch. all grounded to the body. and it works havent had electrical problems since.

[JoshieDoom]

To keep the foglights on all the time you need to open the relay switch under the hood and snip the green wire going to the relay then ground out that wire comming from the lights themselfs then tape up the wire comming out.. stays on all the time and you can still use the switch.