FREE Mods

**xtreme_rob** · 09-02-2008, 04:07 AM

So i was hoping to get a list of free mods started up with everyone compiling to the list and giving their inputs. I'll start off with a few and see where it goes from there. And anyone who cares to add just jump right in...

*porting throttle body/MAF vs replacing it

*removing the screen from the MAF. You can just carefully reach in, making sure not to touch the wires, and "pop" it out.

*removing the plastic "baffle" from the inside of the nose of the ram air hood by drilling out the rivets and pulling it out. This is supposed to give you a more direct airflow.

*cutting holes in the bottom of your stock airbox to help increase breathing capability. (may put a damper on passing water ingestion testing)

**Y2K_CAMARO** · 09-02-2008, 04:15 AM

Those are some good ones, but try this web site. Might have a couple of little things you might like

http://www.installuniversity.com/install_university/

**screaminbird** · 09-02-2008, 06:29 AM

take off the egr and airpump

**noxside** · 09-02-2008, 12:42 PM

Not free, but cheap - the throttle body bypass, might cost no more then 7$

**MR.Dick** · 09-02-2008, 01:18 PM

Yeah install university has a bunch of great stuff. I've done the EGR and AIR removal. I will be doing the Throttle body bypass soon. I live in Miami so cold weather is not an issue.

**xtreme_rob** · 09-02-2008, 01:26 PM

Originally Posted by MR.Dick

Yeah install university has a bunch of great stuff. I've done the EGR and AIR removal. I will be doing the Throttle body bypass soon. I live in Miami so cold weather is not an issue.

EGR removal or just trimming the pipe that goes into the throttle body? if you do a complete removal would it fail emissions?

**partemisio** · 09-08-2008, 11:19 AM

Does anybody have this done with a boosted car? http://www.installuniversity.com/ins...afapalooza.htm

Do you think the wires would hold up in a boosted car?

**NorthwoodDavid** · 09-08-2008, 12:34 PM

Originally Posted by xtreme_rob

EGR removal or just trimming the pipe that goes into the throttle body? if you do a complete removal would it fail emissions?

Emissions...whats that?

lol

yeah most likely it will fail but it also depends how they test it.I dont know anything about it, just that i dont have to worrie about it in my lil town

.