decals do's and don'ts?...

[bgable]

i just got my trans am overlays and front bird vinyl decals from ws6store in the mail today and i was wondering what the best way to go about putting them on would be it looks like they have clear vinyl around them will i have to trim them???

[GetSome04]

no, if they are to big to manage you can cut them into parts, but the vinyl is what you peel off in the end.... clean area with dish soap and water, dry, spray area with water bottle generously, tape spots to insure levelness, spray back of decal after peeled from backing with water, press decal on car from center outward (the wetter the surface of the car the easier to re adjust) smooth on with credit card, or some sort of squegie, flatten out with card for a minute to get all air holes out and peel vinyl off, if it is small enough you can smooth with finger before pulling off the vinyl... just did it myself this weekend and it was easier than expected.

[Stricken1]

YOu will not be happy with the vinyl overlays in about 3 months there gonna start coming off! On ebay look up a guy named muffinbuster for the lazer cut ones!

[TransAmy]

i had the vinyls and they were good and all, but eventually i went to muffinbuster and now i have the whole set! nose inserts, front bird, side logos, rear inserts! expensive but worth it!!!!