Page 2 of 2 FirstFirst 12
Results 21 to 28 of 28

cut outs?

This is a discussion on cut outs? within the Firebird / WS6 forums, part of the Vehicle Specific category; Originally Posted by 98maro i was afraid to get it.. cuz the price it was very cheap compare to other ...

  1. #21
    Member 10erg01's Avatar
    Join Date
    Nov 2009
    Location
    Columbia, Mo
    Posts
    112
    1998 Firebird Formula

    Quote Originally Posted by 98maro View Post
    i was afraid to get it.. cuz the price it was very cheap compare to other ones..
    but i like mine.. i would buy it again..

    which one u want to get ? like the one i got or the other one?
    you mean the 2.5 inch or 3inch one? If so i havent decided yet i figured i would look at the size of the pipe at the point were im going to put it then get the one thats the same size.

    Another thing do you or anybody else now what the differnce or if there is any between a dual cutouts and single one?

  2. #22
    Junior Member
    Join Date
    Oct 2010
    Location
    EIU, Charleston, IL
    Posts
    6

    Silver
    1999 Pontiac Trans Am

    Quote Originally Posted by 10erg01 View Post
    you mean the 2.5 inch or 3inch one? If so i havent decided yet i figured i would look at the size of the pipe at the point were im going to put it then get the one thats the same size.

    Another thing do you or anybody else now what the differnce or if there is any between a dual cutouts and single one?
    dual cutouts are just that.. they come with 2 in the set. most people who go with that either run true duals or run them pretty much right off the headers or an ORY. single is more for putting it in the I-pipe like Pajeff02.

  3. #23
    Senior Member 98maro's Avatar
    Join Date
    Feb 2010
    Location
    north bay california
    Age
    28
    Posts
    2,973

    Black
    00 camaro ss M6 #6695

    Quote Originally Posted by 10erg01 View Post
    you mean the 2.5 inch or 3inch one? If so i havent decided yet i figured i would look at the size of the pipe at the point were im going to put it then get the one thats the same size.

    Another thing do you or anybody else now what the differnce or if there is any between a dual cutouts and single one?
    Your best choice will be 3" inche. I'm sure most of the people here have that. I have 3" inch on mine.
    I have only one. It's on the same location as pajeff,,
    If you want dual cut outs. It's only if you have dual exhaust from the headers all the way to the back. And for that you need and x pipe.
    So I would say just get a single cutout. It still make a difference
    00 ss blk m6 " STOCK" strano springs, slp bilstein shocks, adj LCA, adj panhard bar, relocation brackets, 2 point SFCs welded,OEM zo6 rims black, magnaflow exhaust, CME exhaust,E/cutout, slp grille, custom front plate mount, HIDs, whistler mod, side moldings delete, slp air lid, ported and polished TB, strut tower brace, 3.73s gears, and some other parts to list!
    next to come,4.10s,ls7 clutch, ms3 or 228r cam, ported 243s, ls6 intake, ls6 oil pump. ls2 timing chain, longtube headers no cats, with a tune..
    02 tahoe Z71 blacked out
    00 jeep grand Cherokee limited on 22s.
    07 Dodge Charger R/T Inferno Red, Sold
    98 z28 red m6 sold
    07 zx6r ninja flat/black sold
    08 zx6r ninja sold

  4. #24
    38 of 139 PontiacFan's Avatar
    Join Date
    Jul 2005
    Location
    Kearney, NE
    Posts
    931

    Black
    2001 Pontiac

    Quote Originally Posted by 98maro View Post
    If you want dual cut outs. It's only if you have dual exhaust from the headers all the way to the back. And for that you need and x pipe.
    You can install dual cut-outs in the y-pipe, & still run the single I-pipe design.
    Just depends on the Y-pipe design, ...
    The old FLP design is ideal for that purpose.

    But I will agree & say yer right, most people choose the single 3" & simply put it under the rear seat area as shown in the photos above.

  5. #25
    Junior Member
    Join Date
    Aug 2010
    Location
    Savannah, Ga
    Posts
    23

    Blue
    2001 TA WS6, 1995 BMW M3

    Personally, I would recommend getting a DMH cutout. Their product is outstanding and customer service is superb. My DMH cutout recently went sour, so i called DMH and they accepted the cutout without a receipt, rebuilt the cutout, and sent it back. I just paid for shipping and handling. Their may be other stories out their, but that is a +1 in my book.
    Last edited by pajeff02; 02-01-2011 at 07:17 PM. Reason: Removed non-sponsor link.

  6. #26
    Junior Member hippiespace's Avatar
    Join Date
    Apr 2008
    Location
    Ashburn Virginia
    Age
    37
    Posts
    65

    Navy Blue
    2013 ZL1

    I just put a cut out on my I pipe a week ago. I LOVE IT !!! Best of both worlds. I would strongly suggest if you haven't already put on LT Headers and remove the cats.

  7. #27
    Senior Member 98maro's Avatar
    Join Date
    Feb 2010
    Location
    north bay california
    Age
    28
    Posts
    2,973

    Black
    00 camaro ss M6 #6695

    Quote Originally Posted by PontiacFan View Post
    You can install dual cut-outs in the y-pipe, & still run the single I-pipe design.
    Just depends on the Y-pipe design, ...
    The old FLP design is ideal for that purpose.

    But I will agree & say yer right, most people choose the single 3" & simply put it under the rear seat area as shown in the photos above.
    You're right.
    I wanted to put the dual cutouts on the Y pipe before the cats, that was the power and noise was noticeable.
    But I'm happy with a single cutout on the I pipe.
    Dual cutout is just a waist of money IMO.
    On a set up like ours.

  8. #28
    Member ebdboudreaux's Avatar
    Join Date
    Nov 2008
    Location
    Tampa, Fl
    Age
    31
    Posts
    206
    99' 30th Ann TA

    doug's electric cutouts are probably some of the best quality... cost a little more.... but a way better design
    Last edited by pajeff02; 02-01-2011 at 07:18 PM. Reason: Removed non-sponsor link.
    30th Anniversary Trans Am #0998
    B&B triflow exhaust, American Racing Headers, RPM Level V T-56, RPS clutch, LS6 intake, P&P TB, Hotchkis lower trailing, Panard Rod, Tower Brace, SFC's, and Swar Bar Kit, BMR Lowering Springs, HAL Adjustable Shocks and Coilovers, Powerslot Rotors

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. cut outs
    By cspeich2011 in forum Firebird / WS6
    Replies: 7
    Last Post: 04-29-2011, 04:22 PM
  2. What are the best cut outs?
    By Mike0202 in forum External Engine
    Replies: 71
    Last Post: 03-02-2011, 08:17 PM
  3. cut outs...
    By mr_r0bert0 in forum External Engine
    Replies: 6
    Last Post: 01-15-2009, 03:31 PM
  4. Cut Outs
    By jz28 in forum External Engine
    Replies: 25
    Last Post: 05-13-2008, 09:00 PM
  5. What Cut-outs should I get!!!!!!
    By Bangbus in forum General Help
    Replies: 14
    Last Post: 11-30-2006, 03:03 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •