Results 1 to 10 of 10
Thread: clutch safety switch
-
12-21-2006, 10:40 AM #1
clutch safety switch
hey guys this is the 3rd time my car has not started. i have already replaced the clutch safety switch and i think it might be the fuse. i doesnt crank or click at all know its not the battery i just replaced that with a yellow top. and i dont think it the starter so it must be the fuse right? anyways i would just like to see if anyone has had the same problem or has an advice. thanks
-
12-22-2006, 08:25 AM #2
- Join Date
- Oct 2006
- Location
- St. Clair Shores. Michigan
- Age
- 55
- Posts
- 1,602
Navy Blue Metallic- `98 Formula M6 HdTp
Could be a problem with the VATS (Vehicle Anti Theft System) has your security light been coming on or flashing ?
Craig
Semi Retired Street Racer
2012 Lava Red Mustang GT Coupe Brembo/3.73's
Build Date 3/17/11, Last Lava Red GT
Gone but not forgoten
NBM `98 Formula M6 HdTp
1 of 1 Build Date 3/12/98
-
12-22-2006, 01:22 PM #3
just flashing like normal when ever the car is locked. you wouldnt happen to have a diagram of all the electrical stuff for our car would you?
-
12-23-2006, 06:24 AM #4
- Join Date
- Jul 2006
- Location
- boiling springs
- Posts
- 3
red- 93 trans am
my friends 01 t/a did the same thing and we replaced the starter and it hasnt messed up since.... get under it and hit the starter and wiggle some wires if it cranks after that it the starter
-
12-23-2006, 07:53 AM #5
so m=now it starts sometimes but i didnt think it was the starter i got under the dash and held the switch and got it started once and then the it happened agian holding the switch didnt work. but then after waiting a few minutes i tried it pushed the clutch in and turned the key for like 15 sec and then it started...... so i dont think its the starter maybe i should just get rid of the switch does anybody do that?
-
12-23-2006, 08:25 AM #6
I'de just replace the starter, don't hear of switches going bad.
-
12-23-2006, 12:46 PM #7
- Join Date
- Jul 2006
- Location
- boiling springs
- Posts
- 3
red- 93 trans am
well forgot to say that we also straight wired his switch also
-
12-23-2006, 12:53 PM #8
HMMM well i think i might just wire it and if that doesnt work then get a starter. btw does anyone have a wriring diagram or know where i can find one ?
-
12-23-2006, 02:26 PM #9
-
12-26-2006, 04:39 AM #10
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
where is the ignition nuetrel safety switch located?
By qwik219d9 in forum General HelpReplies: 1Last Post: 08-29-2014, 03:18 PM -
Question: Engine won't crank, not VATS, clutch safety switch, battery
By 318Charger in forum General HelpReplies: 19Last Post: 09-09-2010, 04:03 PM -
FJO and/or Fuel Pressure Safety Switch
By captainwizbang in forum NitrousReplies: 2Last Post: 09-04-2007, 11:21 PM -
clutch pedal safety start help
By ws6/ss in forum General HelpReplies: 12Last Post: 11-06-2006, 03:36 PM -
clutch pedal safety start help
By ws6/ss in forum Manual TransmissionReplies: 0Last Post: 11-01-2006, 11:15 PM
Bookmarks