Results 1 to 12 of 12

CETA Mod help

This is a discussion on CETA Mod help within the Firebird / WS6 forums, part of the Vehicle Specific category; I'm going to do the ceta mod tomorrow because I'm off work and was wondering if anyone had a picture ...

  1. #1
    Member Dave-TransAm's Avatar
    Join Date
    Dec 2009
    Location
    Gilbert Arizona
    Age
    25
    Posts
    202

    Red
    1997 Firebird M5

    CETA Mod help

    I'm going to do the ceta mod tomorrow because I'm off work and was wondering if anyone had a picture of a red T/A with any color mod besides black? Also what kind of paint is recommended and what grit sand paper do you use? Thanks for any help and pics. I'll post pics as soon as it's finished as well.

  2. #2
    Junior Member K_garretson23's Avatar
    Join Date
    Nov 2010
    Location
    clementon NJ
    Posts
    80

    black
    1979 trans am

    I won't bother posting a picture because mine is silver with the black ceta mod. I used 600 grit to rough up the surface a bit then washed it with warm soapy water, let thoroughly dry, then I used duplicolor adhesive promotor let it dry till it's tacky but still wet then used gray dupli color primer and flat black paint. I used 1000 grit to take care of any runs and sprayed as many layers needed. I did not use a clear to keep the flat black look. Most will say overkill but removing the bumper saved me from any over spray and kept the paint even.

  3. #3
    Member Dave-TransAm's Avatar
    Join Date
    Dec 2009
    Location
    Gilbert Arizona
    Age
    25
    Posts
    202

    Red
    1997 Firebird M5

    any idea of another color that would look good? I was thinking silver but im really not sure about it.

  4. #4
    Junior Member K_garretson23's Avatar
    Join Date
    Nov 2010
    Location
    clementon NJ
    Posts
    80

    black
    1979 trans am

    Mabe a gun metal gray. Personally I don't like ceta mods other than black

  5. #5
    Senior Member 98maro's Avatar
    Join Date
    Feb 2010
    Location
    north bay california
    Age
    28
    Posts
    2,973

    Black
    00 camaro ss M6 #6695

    Black should be the only color on CETA mode sprcially on a red car.
    Flat blk should look good.
    Any other color will look out of place.

  6. #6
    Member Dave-TransAm's Avatar
    Join Date
    Dec 2009
    Location
    Gilbert Arizona
    Age
    25
    Posts
    202

    Red
    1997 Firebird M5

    Quote Originally Posted by 98maro View Post
    Black should be the only color on CETA mode sprcially on a red car.
    Flat blk should look good.
    Any other color will look out of place.
    Yep I did a matte black. I've still gotta do a few more coats so ill take some pictures after its done and post em up for you guys.

  7. #7
    Member Dave-TransAm's Avatar
    Join Date
    Dec 2009
    Location
    Gilbert Arizona
    Age
    25
    Posts
    202

    Red
    1997 Firebird M5

    got pics on photobucket.

    Pictures by Dave-TransAm - Photobucket

  8. #8
    Junior Member K_garretson23's Avatar
    Join Date
    Nov 2010
    Location
    clementon NJ
    Posts
    80

    black
    1979 trans am

    looks good!

  9. #9
    Super Moderator
    pajeff02's Avatar
    Join Date
    Feb 2009
    Location
    Mansfield, PA
    Posts
    21,567

    Black & Blue
    '02 WS.6 / '07 Suburban

    The CETA mod looks so damn good. Almost makes me wish our car wasn't black... almost.

    Nice work!

  10. #10
    Member Dave-TransAm's Avatar
    Join Date
    Dec 2009
    Location
    Gilbert Arizona
    Age
    25
    Posts
    202

    Red
    1997 Firebird M5

    Thanks guys!

  11. #11
    Member Furious1's Avatar
    Join Date
    Jun 2011
    Location
    Central IL
    Posts
    123

    White
    2001 Trans Am WS6

    Time for a wash?

  12. #12
    Member Dave-TransAm's Avatar
    Join Date
    Dec 2009
    Location
    Gilbert Arizona
    Age
    25
    Posts
    202

    Red
    1997 Firebird M5

    Quote Originally Posted by Furious1 View Post
    Time for a wash?
    Yeah once its driveable again. I dropped a driveshaft at 130 on the freeway about 2 months ago and blew the transmission apart so its been sitting since then. Got the new tranny and driveshaft in the other day but now I still need a plug, a hose, and something else but I forgot what it was. Should be running in the next few days I hope

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. There's a CETA in here somewhere....
    By lopedawg in forum Firebird / WS6
    Replies: 11
    Last Post: 06-23-2010, 08:46 AM
  2. CETA mod on a NBM WS6?
    By beach cruiser in forum Firebird / WS6
    Replies: 8
    Last Post: 06-03-2010, 10:14 PM
  3. Help: Ceta mod ws6
    By FirehawkM6 in forum Firebird / WS6
    Replies: 40
    Last Post: 03-25-2010, 10:43 PM
  4. CETA Mod!!!
    By 01ls1ws6 in forum Appearance Section
    Replies: 18
    Last Post: 12-23-2007, 08:27 AM
  5. CETA Mod
    By UKXK189 in forum Appearance Section
    Replies: 8
    Last Post: 07-12-2007, 04:53 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •