Page 2 of 3 FirstFirst 123 LastLast
Results 21 to 40 of 55

brand new and im full of questions!

This is a discussion on brand new and im full of questions! within the Firebird / WS6 forums, part of the Vehicle Specific category; Originally Posted by TACE02 even if the LS6 manifold increased HP by 6 RWHP (which it doesn't, it increases it ...

  1. #21
    King 0f n00bz shady milkman's Avatar
    Join Date
    Jan 2006
    Location
    Shepherd, Michigan
    Age
    29
    Posts
    11,775

    blacker than wesleysnipes
    98' trans am

    Quote Originally Posted by TACE02 View Post
    even if the LS6 manifold increased HP by 6 RWHP (which it doesn't, it increases it by more than 6), it increases it throughout the power curve (all RPMs) not just peak. So great investment.
    and a vital part for later mods like cam and ect.

  2. #22
    Member TACE02's Avatar
    Join Date
    Aug 2005
    Location
    Texas
    Age
    41
    Posts
    568

    ASC #753
    2002 Collector's Edition

    psst, DRs are not bad for an auto with a 10 bolt, especially if you not gonna go over 400 RWHP. seen 10 bolts last forever on mid to low 11 second auto's with DRs. But definately install a stall (3400 would be nice) and 3.73 gears and retune with a few bolt ons.

  3. #23
    ALRIGHT NOW wont u listen
    Join Date
    Aug 2007
    Location
    KY
    Age
    32
    Posts
    644

    though you cant hear..
    i love you sweet leaf!!!

    ok so a 3400 stall, cut the lower part of the air box and buy an upper lid, dont F with the MAF.

    any thoughts on underdrive pullys?

    whats price on the lid and 3400 stall and where to get?

  4. #24
    Senior Member greatwhiteZ28's Avatar
    Join Date
    Nov 2006
    Location
    d
    Age
    33
    Posts
    3,675

    white
    2002 z28

    3.73 would really compliment that car X2)))))))

    and also go with the sleeper mode your going for

  5. #25
    Senior Member greatwhiteZ28's Avatar
    Join Date
    Nov 2006
    Location
    d
    Age
    33
    Posts
    3,675

    white
    2002 z28

    Quote Originally Posted by bad boy 99 View Post
    ok so a 3400 stall, cut the lower part of the air box and buy an upper lid, dont F with the MAF.

    any thoughts on underdrive pullys?

    whats price on the lid and 3400 stall and where to get?
    a lid can be 99$ + just matters which one you want and a stall go go for 600$ and almost 600 for install

  6. #26
    ALRIGHT NOW wont u listen
    Join Date
    Aug 2007
    Location
    KY
    Age
    32
    Posts
    644

    though you cant hear..
    i love you sweet leaf!!!

    3.73's!! thats what they installed!! HA thats what it was!, and aperently the trans has a steeper final drive also...dont know what tho, and yeah it doesnt have DR but they are VERY wide BFG's

    holy cow this is already on page 2 and i just droped this post like 30 mins ago! hehe you guys are awsome! god the fiero forum im on gets like one post a day lol.

  7. #27
    Senior Member greatwhiteZ28's Avatar
    Join Date
    Nov 2006
    Location
    d
    Age
    33
    Posts
    3,675

    white
    2002 z28

    or you can go clear to give that realllly different loook
    Last edited by greatwhiteZ28; 10-03-2007 at 07:04 PM.

  8. #28
    ALRIGHT NOW wont u listen
    Join Date
    Aug 2007
    Location
    KY
    Age
    32
    Posts
    644

    though you cant hear..
    i love you sweet leaf!!!

    clear with a k/n would look sweet...where to get the clear one? $$

  9. #29
    Member TACE02's Avatar
    Join Date
    Aug 2005
    Location
    Texas
    Age
    41
    Posts
    568

    ASC #753
    2002 Collector's Edition

    Quote Originally Posted by bad boy 99 View Post
    ok so a 3400 stall, cut the lower part of the air box and buy an upper lid, dont F with the MAF.

    any thoughts on underdrive pullys?

    whats price on the lid and 3400 stall and where to get?
    underdrive pulley=less rotating mass=few more ponies (again, throughout power curve).

    lid=@$100-125, any speed shop or visit WS6store.com
    underdrive pulley=@$200-250, any speed shop or WS6store.com
    stall=uhhh I dunno, never dealt with that, have a manual

  10. #30
    King 0f n00bz shady milkman's Avatar
    Join Date
    Jan 2006
    Location
    Shepherd, Michigan
    Age
    29
    Posts
    11,775

    blacker than wesleysnipes
    98' trans am

    on the UD pulley..what tace02 said..my only advice is get one that has harmonic dampening...stock ls1 has it. Its a lil more pricey but its a must..it prevents harmonics..vibrations to bounce through the crank and block...eventually without HD on your pulley..your block will stress fail and crack.

  11. #31
    ALRIGHT NOW wont u listen
    Join Date
    Aug 2007
    Location
    KY
    Age
    32
    Posts
    644

    though you cant hear..
    i love you sweet leaf!!!

    ok good info! one with a balance (kinda defets the less rotating mass purpus?) who knows, anyway ws6store. AWSOME site, i just ordered the clear lid and am thinking about the intake manifold and TC, i told him just now that we would have to remove his tranny in his garage to save him $600 to 1200$ and he was like...do what?! lol so i dont know what that ment.

  12. #32
    King 0f n00bz shady milkman's Avatar
    Join Date
    Jan 2006
    Location
    Shepherd, Michigan
    Age
    29
    Posts
    11,775

    blacker than wesleysnipes
    98' trans am

    Quote Originally Posted by bad boy 99 View Post
    ok good info! one with a balance (kinda defets the less rotating mass purpus?)
    no because its still lighter..and with rotational mass...like a few grams equals like 800 pounds when rotating at those high rpms. always try to lose rotational mass as much as possible..you'll see more gains..then with dead weight.

  13. #33
    ALRIGHT NOW wont u listen
    Join Date
    Aug 2007
    Location
    KY
    Age
    32
    Posts
    644

    though you cant hear..
    i love you sweet leaf!!!

    hey quick question that clear air lid WILL fit under the stock non ws6 hood right?? and do i need to make any modifications to make it fit on?.. just ordered a k&n filter aswell to go with it...looks cool clear with the k&n under it.

    about the underdrive pully i put one on my 3400 v6 fiero and acually lost power..... is that only a v6 thing?

  14. #34
    Senior Member greatwhiteZ28's Avatar
    Join Date
    Nov 2006
    Location
    d
    Age
    33
    Posts
    3,675

    white
    2002 z28

    Quote Originally Posted by bad boy 99 View Post
    hey quick question that clear air lid WILL fit under the stock non ws6 hood right?? and do i need to make any modifications to make it fit on?.. just ordered a k&n filter aswell to go with it...looks cool clear with the k&n under it.

    about the underdrive pully i put one on my 3400 v6 fiero and acually lost power..... is that only a v6 thing?
    yes that clear lid will fit no promblem had that on my ta, and not sure about your feiro,LOL, jk, but its very miniamal gain, but there will be loss in the accesories componets

  15. #35
    King 0f n00bz shady milkman's Avatar
    Join Date
    Jan 2006
    Location
    Shepherd, Michigan
    Age
    29
    Posts
    11,775

    blacker than wesleysnipes
    98' trans am

    Quote Originally Posted by greatwhiteZ28 View Post
    yes that clear lid will fit no promblem had that on my ta, and not sure about your feiro,LOL, jk, but its very miniamal gain, but there will be loss in the accesories componets
    the minimal gain is in hp and tq..however you get alot quicker revs and that is were you will she gains..

  16. #36
    Heinz
    Join Date
    Jun 2007
    Location
    Houston
    Posts
    19

    Pewter
    2001 TA WS6

    Hey I don't know how to start a new thread but it seems that everyone who starts them forgets to look at past threads. it's the common "what should i do to my car?" Anyway, anyone know where to find some cool appearence parts: smoked park lamps, turn signals, decals. All these sites i've been to suck but i figured you guys might know the good ones. Thanks

  17. #37
    King 0f n00bz shady milkman's Avatar
    Join Date
    Jan 2006
    Location
    Shepherd, Michigan
    Age
    29
    Posts
    11,775

    blacker than wesleysnipes
    98' trans am

    Quote Originally Posted by Ketchup View Post
    Hey I don't know how to start a new thread but it seems that everyone who starts them forgets to look at past threads. it's the common "what should i do to my car?" Anyway, anyone know where to find some cool appearence parts: smoked park lamps, turn signals, decals. All these sites i've been to suck but i figured you guys might know the good ones. Thanks
    how are you going to bash a new member...being a new member and not follow what you preach. you are hi-jacking a thread which is against the rules.

  18. #38
    Heinz
    Join Date
    Jun 2007
    Location
    Houston
    Posts
    19

    Pewter
    2001 TA WS6

    Huh? I am a new member. I found the obvious redundancy in people not attempting to search through threads at all a just start the same new ones. Your message made little to no sense. I commented on the restarting of very similar past threads not hijacking so i did "follow what I preach". So, starting a new one...how do you do it?

  19. #39
    ALRIGHT NOW wont u listen
    Join Date
    Aug 2007
    Location
    KY
    Age
    32
    Posts
    644

    though you cant hear..
    i love you sweet leaf!!!

    you go to hijack-a-thread.com and start one there..
    Last edited by bad boy 99; 09-04-2007 at 04:44 PM.

  20. #40
    ALRIGHT NOW wont u listen
    Join Date
    Aug 2007
    Location
    KY
    Age
    32
    Posts
    644

    though you cant hear..
    i love you sweet leaf!!!

    hey there, does anyone have a good write up on how to dismantle/cut the (lower??) part of the ls1 intake box? i just ordered the clear top lid, so how do you cut the bottem one to flow better? pics and directions would help even tho im sure its not so hard....i just dont want to screw up my father-in laws T/A if you know what i mean..
    thanks -Adam

Page 2 of 3 FirstFirst 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. For Sale: Full Set of Goodyear F1 GS Brand New
    By Bugaboo in forum Parts For Sale / Trade
    Replies: 1
    Last Post: 08-10-2008, 04:51 PM
  2. I am just full of questions
    By chevy1966 in forum Internal Engine
    Replies: 4
    Last Post: 01-26-2008, 08:36 AM
  3. Brand New 408 Shortblock-Did I say it is Brand New
    By greatwhitess in forum Parts For Sale / Trade
    Replies: 3
    Last Post: 10-05-2007, 02:59 AM
  4. 3.73 Richmond Gear and Full install kit everything you need *BRAND NEW*
    By BlackZ28629 in forum Parts For Sale / Trade
    Replies: 12
    Last Post: 08-21-2006, 05:47 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •