BAER or High Performance Brake Calipers For T/A

[fbodyNATION]

are baer brakes available for 93-02 trans ams? i like how the high performance brake calipers look even the CTS V with the LS2 engine brake calipers look great i want that look on my t/a


a set of these in red will look great on any 4th gen fbody

[raynor139]

You can put the cts-v brake setup on your car as long as you have 18 inch wheels. Wesman has a writeup on it somewhere on here.

[fbodyNATION]

You can put the cts-v brake setup on your car as long as you have 18 inch wheels. Wesman has a writeup on it somewhere on here.

thanks i looked on ebay those cts v brakes are pricey LoL!

[tatertot91]

I've got 4 piston rear willwoods, No fronts though

[BadTA00]

Yes, Baer Brakes are available for the Fbody cars but they are pricey for the system.
The Baer Claw system will run you about $3000-$3500, without new rear calipers (only "enhanced" ).
You can get the Eradispeed 2-piece rotors for the front and the 1-piece Decelarotors for the rear for about $700-$850. And get some Hawk HPS pads, stainless brake lines and paint your calipers and it would be cheaper.
Have you seen the ATE Premium One rotors and packages from stranoparts.com? I've never heard anything bad about them.


Sent from Motorola Atrix using Tapatalk 2.

[pajeff02]

While we are on the subject... is there a reasonably priced caliper upgrade that will fit the stock wheels?

[tatertot91]

I know you can do the c5 upgrade that pushes the caliper outwards so you can fit c5 rotors, not sure about calipers though. I'm most likely going to pick up some stainless lines, sounds like a decent upgrade.