Page 1 of 2 12 LastLast
Results 1 to 20 of 30

Window rattling

This is a discussion on Window rattling within the Camaro / SS forums, part of the Vehicle Specific category; My drivers side window on the camaro rattles when it is fully down, only when i hit a bump though. ...

  1. #1
    Member
    Join Date
    Oct 2006
    Location
    Springfield
    Age
    30
    Posts
    330

    Silver
    2004 SVT Cobra

    Window rattling

    My drivers side window on the camaro rattles when it is fully down, only when i hit a bump though. I figured as usual it was the golden colored window guides on top but both are still intact. I adjusted them so they are pressed against the window when it is down, but that did nothing. Any ideas what the problem could be??

  2. #2
    Member Empatho's Avatar
    Join Date
    Jan 2007
    Location
    San Diego
    Posts
    361

    Pewter
    02 Z28

    I have the same problem on the drives side, I havent tried anything yet
    2002 Z28 Auto (3.23 gears)
    Mods
    Lid, UD pulley, Shift Kit, 160 Thermo, Y-pipe, Panhard, TB bypass, Bellow, K&N, Strut Brace, Flowmaster, weight reduction.

  3. #3
    Senior Member 35thAnniZ28's Avatar
    Join Date
    Mar 2007
    Location
    Texas
    Posts
    1,809

    eating bulldog
    son of biscuit

    as is mine...we got gm to thank for that

  4. #4
    Senior Member camarojunky74's Avatar
    Join Date
    Jun 2007
    Location
    corona ca
    Age
    31
    Posts
    2,258

    white, white and pewter
    Rip99SSA4,74Z28M4,02SSM6

    its probably the broken felt guides, no big deal,
    \
    you can thanks gm for the hp too

  5. #5
    Member
    Join Date
    Oct 2006
    Location
    Springfield
    Age
    30
    Posts
    330

    Silver
    2004 SVT Cobra

    Ya i figured it was broken felt guides as usual, but there still intact. I guess its coming from somewhere else.

  6. #6
    Senior Member camarojunky74's Avatar
    Join Date
    Jun 2007
    Location
    corona ca
    Age
    31
    Posts
    2,258

    white, white and pewter
    Rip99SSA4,74Z28M4,02SSM6

    it could be loose?

  7. #7
    Senior Member 35thAnniZ28's Avatar
    Join Date
    Mar 2007
    Location
    Texas
    Posts
    1,809

    eating bulldog
    son of biscuit

    wait..what are felt guides?!?!? plz describe...oh and i called mr.gm..i thanked him

  8. #8
    Senior Member camarojunky74's Avatar
    Join Date
    Jun 2007
    Location
    corona ca
    Age
    31
    Posts
    2,258

    white, white and pewter
    Rip99SSA4,74Z28M4,02SSM6

    lol what did he say?

    also they are the bronze colored brackets behind the door panell at the top of the door, they are bolted to the fiberglass and they hold the window firm in the guides with felt, if these are broken or missing you window will rattle

  9. #9
    Member
    Join Date
    Oct 2006
    Location
    Springfield
    Age
    30
    Posts
    330

    Silver
    2004 SVT Cobra

    no there tight, i even adjusted the back one so its up against the window when its fully down. I was sure that would have fixed it but it did nothing.

  10. #10
    Senior Member 35thAnniZ28's Avatar
    Join Date
    Mar 2007
    Location
    Texas
    Posts
    1,809

    eating bulldog
    son of biscuit

    i shall purchase some in the near future

  11. #11
    Senior Member camarojunky74's Avatar
    Join Date
    Jun 2007
    Location
    corona ca
    Age
    31
    Posts
    2,258

    white, white and pewter
    Rip99SSA4,74Z28M4,02SSM6

    lol you can just tack weld them, as for the rattle, the bolts that bolt the register into the door may be broken , if so ,

  12. #12
    Senior Member 35thAnniZ28's Avatar
    Join Date
    Mar 2007
    Location
    Texas
    Posts
    1,809

    eating bulldog
    son of biscuit

    dood your right...i noticed part of my door seperates from its "skin"

  13. #13
    Member jeremy_m70's Avatar
    Join Date
    Dec 2006
    Location
    ALABAMA
    Age
    38
    Posts
    132

    SILVER
    1998 Z28

    Hey guys just had similiar problem, although my window stabilzer's where bad my window could slide front to back and when rolling up it would lean towards inside of car and rattle like hell when down. My problem was there are 2 tracks, I believe, that runs up and down, when door panel is removed you can see the back side of the track through the speaker opening and between the door handle and locks in that opening, anyhow, the wheel that traveled in one of the track broke off the rivet from the arm in the tract which allowed the window to do such as I discribed. If this is the problems your having check it out with a mirrior or feel around the bottom of the track for the broken wheel if window is raised because it should still be in the track and at the bottom.

  14. #14
    Member
    Join Date
    Oct 2006
    Location
    Springfield
    Age
    30
    Posts
    330

    Silver
    2004 SVT Cobra

    Ill have to check that out then. There has to be something wrong somewhere

  15. #15
    Senior Member camarojunky74's Avatar
    Join Date
    Jun 2007
    Location
    corona ca
    Age
    31
    Posts
    2,258

    white, white and pewter
    Rip99SSA4,74Z28M4,02SSM6

    if i was having problems like this, i would take it to the dealer with parts in hand and pay for there labor, becuase techs now what there doing and even if it doesnt get done right its up to them to make it right, i would take it to a professional, thats my opinion, i have guys take weird shit to my shop all the time and vise versa,

  16. #16
    Senior Member 35thAnniZ28's Avatar
    Join Date
    Mar 2007
    Location
    Texas
    Posts
    1,809

    eating bulldog
    son of biscuit

    Quote Originally Posted by camarojunky74 View Post
    lol what did he say?

    also they are the bronze colored brackets behind the door panell at the top of the door, they are bolted to the fiberglass and they hold the window firm in the guides with felt, if these are broken or missing you window will rattle
    got a part number?!?!

  17. #17
    Senior Member 35thAnniZ28's Avatar
    Join Date
    Mar 2007
    Location
    Texas
    Posts
    1,809

    eating bulldog
    son of biscuit

    plz plz plzplz

  18. #18
    Senior Member camarojunky74's Avatar
    Join Date
    Jun 2007
    Location
    corona ca
    Age
    31
    Posts
    2,258

    white, white and pewter
    Rip99SSA4,74Z28M4,02SSM6

    call your local dealer they should be able to tell you

  19. #19
    Member 1bad99ss's Avatar
    Join Date
    Dec 2006
    Location
    doylestown, ohio
    Age
    35
    Posts
    105

    red
    99 camaro SS

    haha thats pretty much a normal thing when you buy a camaro or trans am. i had a 93 z28 that did that but i just ignored it. my 99 ss doesnt do it yet though. but im sure one day it will.

  20. #20
    Member jeremy_m70's Avatar
    Join Date
    Dec 2006
    Location
    ALABAMA
    Age
    38
    Posts
    132

    SILVER
    1998 Z28

    Quote Originally Posted by 35thAnniZ28 View Post
    got a part number?!?!
    If your talking about window door stabilizers, part # is 10257988. GM parts direct, a sponser i believe, has them for around 7 bucks plus shipping. You have 2 for each door.

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. car rattling
    By ss2000 in forum Suspension and Handling
    Replies: 4
    Last Post: 04-21-2010, 07:31 PM
  2. Help! What is rattling?!?!
    By BdAsBrd01 in forum Firebird / WS6
    Replies: 15
    Last Post: 03-25-2008, 03:24 PM
  3. Something is rattling!!!!!
    By Ryanater in forum Manual Transmission
    Replies: 12
    Last Post: 11-02-2007, 12:46 AM
  4. Camaro Window Switch/1le window/power lock delete kit
    By Marc1130 in forum Parts For Sale / Trade
    Replies: 0
    Last Post: 03-13-2007, 12:05 AM
  5. New Slp LM II rattling!!!
    By matt123 in forum General Help
    Replies: 7
    Last Post: 02-22-2007, 10:19 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •