Results 1 to 10 of 10

Underdrive pully or 3.73 gears

This is a discussion on Underdrive pully or 3.73 gears within the Camaro / SS forums, part of the Vehicle Specific category; I have a LS6 motor with a yank 3300 stall and a stock 10 bolt and i need to know ...

  1. #1
    Member mglangley21's Avatar
    Join Date
    Mar 2007
    Location
    North Carolina
    Posts
    184

    Red
    1999 Camaro SS(LS6 Swap)

    Underdrive pully or 3.73 gears

    I have a LS6 motor with a yank 3300 stall and a stock 10 bolt and i need to know if i should get gears or an underdrive pully kit, i have 3.23 now?

  2. #2
    Member Empatho's Avatar
    Join Date
    Jan 2007
    Location
    San Diego
    Posts
    361

    Pewter
    02 Z28

    don't waste money on a 10 bolt, nuf said

  3. #3
    15 sec. Oh yeah, its fast UTVols98's Avatar
    Join Date
    Apr 2007
    Location
    Forest Lake, MN
    Age
    38
    Posts
    488

    maroon
    2000 Z28

    If your planning on changing out rear-ends then don't put any money in the 10 bolt and get the UD Pulley. However, the 3.73's will make a bigger difference at the track than will an UD pulley.

  4. #4
    Just me Y2KPewterSS's Avatar
    Join Date
    Nov 2006
    Location
    Broken Arrow, OK
    Age
    42
    Posts
    23,353

    Pewter metallic
    2000 Camaro SS

    Neither, save your money for a 12 bolt or 9"
    CCW SP 500s 18x10 275/35 18x11 295/35
    SLP CME with GMMG style catback
    Painted manta stripe

    Quote Originally Posted by konigandy6 View Post
    I'd rather be bi than full homo!!!!

  5. #5
    Senior Member camarojunky74's Avatar
    Join Date
    Jun 2007
    Location
    corona ca
    Age
    31
    Posts
    2,258

    white, white and pewter
    Rip99SSA4,74Z28M4,02SSM6

    ive seen single digit cars with 10 bolts, their not that bad, i say gears

  6. #6
    Member Mr. Hyde's Avatar
    Join Date
    May 2007
    Location
    Seattle
    Age
    57
    Posts
    913

    Jetstream Blue Metallic
    2008 Z06 Corvette

    If I remember correctly, you were having trouble "hooking up" with the factory gears, the 3:73's will only make it worse.

  7. #7
    15 sec. Oh yeah, its fast UTVols98's Avatar
    Join Date
    Apr 2007
    Location
    Forest Lake, MN
    Age
    38
    Posts
    488

    maroon
    2000 Z28

    If your gonna cam it later, I'd do the gears. Most mid to large cams will require 3.43's or greater.

  8. #8
    Member mglangley21's Avatar
    Join Date
    Mar 2007
    Location
    North Carolina
    Posts
    184

    Red
    1999 Camaro SS(LS6 Swap)

    I don't even go to the track with my car so i mostly street race from a roll 90% of the time so i'm hopeing the 3.73 gears won't rip the 10 bolt out so quick, what do you think?

  9. #9
    Senior Member 01SOMSS!'s Avatar
    Join Date
    Aug 2006
    Location
    Oceanside,CA
    Age
    33
    Posts
    2,518

    SOM
    01 Camaro SS

    get the gears.

  10. #10
    Old Enough to Know Better Crimson Sin's Avatar
    Join Date
    Feb 2006
    Location
    Seattle..Land of Constant Rain..
    Posts
    1,426

    Red Fire
    2007 Mustang GT/CS

    I went with 3.73's over a year ago. Stock Rear held up fine. Made a few track passes, mostly playin on the open road tho. Just re-did the rear with an Eaton Locker and Motive gear set. Dunno about others, but with a few suspension mods, LCA Relocator brackets, boxed LCAs, Pan Hard rod and new shocks I hook just fine...Motive gears are WAY quieter then the old set. IF you do go gears, I suggest Motive's.
    Do Not Anger the Horsepower Gods ! MOD !!

    2007 Mustang GT/CS
    2001 SS Cammed. Stalled. Geared. Tuned...Gone but not forgotten..
    Quote Originally Posted by bluefields88 View Post
    pornhub.com has a tribute thing for MJ at the top of page. I can't even jerk off without being bombarded by the bastard.


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. underdrive pully
    By basballny2 in forum External Engine
    Replies: 7
    Last Post: 01-01-2010, 07:26 PM
  2. Underdrive Pully Kit
    By mglangley21 in forum External Engine
    Replies: 2
    Last Post: 08-08-2008, 08:51 AM
  3. Underdrive Pully kit
    By mglangley21 in forum External Engine
    Replies: 1
    Last Post: 05-16-2008, 02:59 AM
  4. Underdrive pully
    By phoenix1987 in forum External Engine
    Replies: 29
    Last Post: 10-05-2006, 09:17 PM
  5. WTB:LS1 Underdrive pully
    By BBBBadSS in forum Parts Wanted / Trade
    Replies: 0
    Last Post: 02-02-2006, 02:35 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •