So far the build on the Cameruh

**blackhawk01** · 07-28-2009, 04:35 PM

Patriot Stage 2 LS6 heads 59cc
Wiseco -6cc pistons
Eagle H-Beam Rods
Pro Magnum 1.85 ratio roller rockers w/ guide plates
Cam XER 238/244 .658/.666 112 LSA = big mother fucker
Morel Lifters
ARP HSK
ARP MSK
3/8" Pushrods

FAST 90/90

Performabuilt Stage 2 trans
Yank PT4400 stall

Pacesetter LT's 1 3/4"
Magnaflow catback w/ cutout.

**jray0305usa** · 07-28-2009, 05:49 PM

**cammed goat** · 07-28-2009, 05:54 PM

**Z28boy2000** · 07-28-2009, 07:12 PM

**67CamaroRSSS** · 07-28-2009, 07:32 PM

So, does it run?

**Bandit1** · 07-28-2009, 07:32 PM

any videos?

**c5z28** · 07-28-2009, 07:36 PM

you tease where are the vids?

**SS201** · 07-29-2009, 10:53 PM

Yeah wheres the videos? Pics?

I bet that MOFO is going to idle relly hard.
Hope to see video soon

**blackhawk01** · 07-31-2009, 07:01 AM

No videos yet because the car isnt together yet but here are a few pics of the stuff..still waiting on the cam and rockers to come in.
Ill get some pics up of the stuff after I get off of work..company laptop are the lulz.

**ssbandit158** · 08-13-2009, 12:14 AM

Are the specs on that cam with 1.7 rockers or the 1.85? Because if you up the rocker ratio the lift is going to be even bigger... Just an FYI

**blackhawk01** · 08-17-2009, 07:48 AM

Originally Posted by ssbandit158

Are the specs on that cam with 1.7 rockers or the 1.85? Because if you up the rocker ratio the lift is going to be even bigger... Just an FYI

Those are with 1.85's. If I need to I can always back down for a little less aggressive cam, but im interested to know how this is going to work out. I have a hybrid engine I swear lol, im basically doing a solid roller type cam and valve train with a hydraulic roller system...its weird I know.