LS1 Comp Cams Hydraulic Roller Camshaft Upgrade -

[Ed Blown Vert]

LS1 Comp Cams Hydraulic Roller Camshaft Upgrade - Cam'd For Power

Our LS1 from the article "Magnificent" is back again. This time were upgrading to a blower specific camshaft from Comp Cams to see if it makes a difference.The LS combos have the potential to make ground-pounding power, even in almost-stock trim. As usual, our bellies weren't yet full, though, and our minds were on the buzz for something more. We just knew our LS1 had more under its skin. Last month we left you with a stout LS1 package ("Magnificent," Jan. '09) that consisted of an LS1 with built internals, including the factory forged crank, a set of Probe 4340 lightweight I-beam rods, and lower-compression SRS series pistons. We topped it off with a set of Trick Flow's GenX Street/Strip CNC-ported lungs for deep breathing. For bump, we used Comp Cams' 230/236 hydraulic roller cam with 0.591/0.601-inch intake/exhaust on a 115-degree lobe separation.


Photo Gallery: LS1 Comp Cams Hydraulic Roller Camshaft Upgrade - Chevy High Performance


Read More | Digg It | Add to del.icio.us




More...

[9t8z28]

I didn't know that they made a tool that pushed the lifters up and out of the way so that the cam could be swapped with the heads still intact. Anyone know where to get this tool?

[sunsetorangess]

Thunderracing.com
Summitracing.com
J