fender grinding

**8urstang** · 06-19-2009, 10:09 PM

is it possible to grind the cars rear fender lips w/o anything bad happen to the fenders????? help me out...having prblems wid da 315s........

**Smittro** · 06-19-2009, 10:32 PM

Originally Posted by 8urstang

is it possible to grind the cars rear fender lips w/o anything bad happen to the fenders????? help me out...having prblems wid da 315s........

I dont know that I would grind that area. There are some threads around about that area being a weak spot in our cars. Sometimes they will flex there without even moding. From another angle, grinding this area may promote rust aswell.

**THE MANIAC** · 06-20-2009, 12:59 AM

it is better to bend the lip
i will do it on my car i got 18"

**ntimid8r7** · 06-20-2009, 01:07 AM

You can go and get them rolled. Grinding them would be a stupid thing to do.

**8urstang** · 06-20-2009, 01:23 AM

Originally Posted by ntimid8r7

You can go and get them rolled. Grinding them would be a stupid thing to do.

i took it to shop they ssaid it cudnt be bent or rolled but they did trim but jus not enought.....it still rubs alilttle

**ntimid8r7** · 06-20-2009, 05:47 AM

They can be rolled. I have a friend who had his stock 10 spokes widened to 11" and lowered the car. He had them done at a custom rod shop. It's just a matter of finding a place that is comfortable enough to do it.

**67CamaroRSSS** · 06-20-2009, 10:49 AM

A baseball bat is your friend.....

**pajeff02** · 06-20-2009, 11:34 AM

http://www.eastwood.com/ew-fender-ro...struction.html

**c5z28** · 06-20-2009, 11:42 AM

yes a grinder will work just fine, my buddy has done it on a few people's cars out here. Did you get your panhard rod yet?

**8urstang** · 06-20-2009, 04:00 PM

Originally Posted by c5z28

yes a grinder will work just fine, my buddy has done it on a few people's cars out here. Did you get your panhard rod yet?

no idnt havent got the PHR yet and beleive me im payin 4 that dum mistake..

..tires rubing n the passenger side...alredy kinda got cut uppp! its cuz of the phr rite????? how dose phr work anyways?????

**c5z28** · 06-20-2009, 04:16 PM

Yes it is vic hubbards is about a 30-40 min drive north from San Jose they have the adjustable for 110 and 124 including tax get some grease to fill the bushings and move that ass end over.
vic hubbards has a websight that will tell you where they are located.